scholarly journals Simulasi Pembebanan Komponen Bender pada Desain Mesin Begel Fabricator Menggunakan Software Autodesk Inventor 2020

2021 ◽  
Vol 2 (2) ◽  
pp. 93-97
Author(s):  
Satriawan Dini Hariyanto ◽  
Wikan Kurniawan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cast Iron ◽  
Mild Steel ◽  
Modulus Of Elasticity ◽  
Material Parameter ◽  
Element Analysis ◽  
Material Parameters ◽  
Constituent Material ◽  
Loading Parameter

Stress analysis of the bender components in the design of the begel fabricator machine was carried out using FEA (Finite Element Analysis) with three variations of the constituent material parameters, namely 6061 aluminum, mild steel, and cast iron with a modulus of elasticity of 68.9 GPa, 220 GPa, 120.5 GPa, respectively. The test is carried out by a loading parameter 2520 MPa and fixed constraint. The maximum von misses stress and displacement obtained for each material parameter components using aluminum, mild steel, and cast iron are 17.78 MPa; 0.00765, 17.49 MPa; 0.00229, 17.62 MPa; 0.00427 respectively.

Lifetime Prediction of Tires with Regard to Oxidative Aging5

2008 ◽  
Vol 36 (1) ◽  
pp. 63-79 ◽  
Author(s):  
L. Nasdala ◽  
Y. Wei ◽  
H. Rothert ◽  
M. Kaliske
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Distribution ◽  
Superposition Principle ◽  
Accelerated Aging ◽  
Material Model ◽  
Aging Behavior ◽  
Element Analysis ◽  
Material Parameters ◽  
Reaction Processes

Abstract It is a challenging task in the design of automobile tires to predict lifetime and performance on the basis of numerical simulations. Several factors have to be taken into account to correctly estimate the aging behavior. This paper focuses on oxygen reaction processes which, apart from mechanical and thermal aspects, effect the tire durability. The material parameters needed to describe the temperature-dependent oxygen diffusion and reaction processes are derived by means of the time–temperature–superposition principle from modulus profiling tests. These experiments are designed to examine the diffusion-limited oxidation (DLO) effect which occurs when accelerated aging tests are performed. For the cord-reinforced rubber composites, homogenization techniques are adopted to obtain effective material parameters (diffusivities and reaction constants). The selection and arrangement of rubber components influence the temperature distribution and the oxygen penetration depth which impact tire durability. The goal of this paper is to establish a finite element analysis based criterion to predict lifetime with respect to oxidative aging. The finite element analysis is carried out in three stages. First the heat generation rate distribution is calculated using a viscoelastic material model. Then the temperature distribution can be determined. In the third step we evaluate the oxygen distribution or rather the oxygen consumption rate, which is a measure for the tire lifetime. Thus, the aging behavior of different kinds of tires can be compared. Numerical examples show how diffusivities, reaction coefficients, and temperature influence the durability of different tire parts. It is found that due to the DLO effect, some interior parts may age slower even if the temperature is increased.

scholarly journals Finite Element Analysis of Camshaft Using Inventor Software

2021 ◽  
Vol 9 (12) ◽  
pp. 906-912
Author(s):  
Valentin Mereuta
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stainless Steel ◽  
Cast Iron ◽  
3D Model ◽  
Steel Alloy ◽  
Element Analysis ◽  
Steel Aisi ◽  
The Comparative Study ◽  
Stainless Steel Aisi

Abstract: In this work the 3D model of the camshaft was done using Autodesk Inventor version 2021 with the literature data and finite element analysis is performed by applying restrictions and loads conditions, first by the absence of the torque and then by applying the torque. Three materials were analyzed in both situations: Cast Iron, Stainless Steel AISI 202 and Steel Alloy. Following the comparative study for the three materials, it can be specified the importance of the material for the construction of the camshaft. Keywords: Camshaft, Static analysis, Autodesk Inventor

scholarly journals Finite element analysis of mild steel - rubber sandwich composite material

2018 ◽  
Vol 376 ◽  
pp. 012040 ◽  
Author(s):  
Y P Ravitej ◽  
V Swaroop ◽  
S Ramesh ◽  
H Adarsha ◽  
Veerachari ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Material ◽  
Mild Steel ◽  
Sandwich Composite ◽  
Element Analysis

Numerical Implementation and Finite Element Analysis of Anisotropic Hyperelastic Biomaterials - Influence of Fibers Orientation

2013 ◽  
Vol 554-557 ◽  
pp. 2414-2423 ◽  
Author(s):  
Rachid Djeridi ◽  
Mohand Ould Ouali
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fiber Orientation ◽  
Mechanical Response ◽  
Theoretical Study ◽  
Constitutive Law ◽  
Anisotropic Behavior ◽  
Element Analysis ◽  
Material Parameters ◽  
Fibers Orientation

Modeling anisotropic behavior of fiber reinforced rubberlike materials is actually of a great interest in many industrials sectors. Indeed, accurately description of the mechanical response and damage of such materials allows the increase of the lifecycle of these materials which generally evolve under several environment conditions. In this paper theoretical study and finite element analysis of anisotropic biomaterials is presented. The mechanical model adopted to achieve this study has been implemented into the finite element code Abaqus using an implicit scheme. This constitutive law has been utilized to perform some numerical simulations. The material parameters of the model have been determined by numerical calibration. One fiber family is considered in this work. Effects of the fiber orientation on the mechanical response and stiffness change of biomaterial is studied. Both the compressible and incompressible states have been taken into account. The results show firstly the capability of the model to reproduce the known results and that optimal fiber orientation can be found.

Thermo-elasto-plastic finite element analysis of warping deformation during casting of gray cast iron

2020 ◽  
Vol 277 ◽  
pp. 116454
Author(s):  
Yuichi Motoyama ◽  
Shuhei Sekiguchi ◽  
Toshimitsu Okane ◽  
Makoto Yoshida
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cast Iron ◽  
Gray Cast Iron ◽  
Gray Cast ◽  
Element Analysis

Thermal-Elastic-Plastic Finite Element Analysis for Laser Welding Deformation of Thin Plate

2013 ◽  
Vol 650 ◽  
pp. 572-576 ◽  
Author(s):  
Pan Zeng ◽  
Le Mei ◽  
Li Ping Lei
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Laser Welding ◽  
Thin Plate ◽  
Welding Deformation ◽  
Element Analysis ◽  
Butt Welding ◽  
Material Parameters ◽  
Elastic Plastic ◽  
Simulation And Experiment

Thermal-Elastic-Plastic finite element analysis is introduced to study the deformation of laser welding of thin plate with consideration of varying material parameters. From aspects of numerical simulation and experiment, three welding cases are investigated: (1) the butt welding with constraint clamp, (2) the free bead welding, (3) the bead welding with constraint clamp. At last, the deformation configurations of welding plate under different constraint cases are characterized, and the behaviors of welding deformation are summarized.

Sign in / Sign up

Export Citation Format

Share Document