Application of a Fractional Viscoelastic Material Model to Rubber in Comparison to a Linear Approach

Author(s):  
Michael Burgwitz ◽  
Johan Steffen Bothe ◽  
Matthias Wangenheim

The modeling of material behavior is an important challenge in structural dynamics. While some materials can be well represented by a linear constitutive law, this becomes more complex when dealing with viscoelastic components. In this paper we investigate a fractional viscoelastic material model and present our results of research, focusing on its parametrical characteristics. We compare the results to a classical linear viscoelastic standard model and highlight advantages of the particular approach: we conduct monofrequent sinusoidal excitations using a DMTA (Dynamic Mechanic Thermal Analysis) machine. We use a viscoelastic TPU (Thermoplastic Polyurethane) sheet as sample and apply varying excitation frequencies and amplitudes. In a first modeling step we reproduce the experimental results with a fractional single degree-of-freedom system with promising results.

1983 ◽  
Vol 50 (4a) ◽  
pp. 740-742 ◽  
Author(s):  
B. Stora˚kers

The classical Fo¨ppl equations, governing the deflection of plane membranes, constitute the first-order consistent approximation in the case of linear elastic material behavior. It is shown that despite the static and kinematic nonlinearities present, for arbitrary load histories a correspondence principle for viscoelastic material behavior exists if all relevant relaxation moduli are of uniform time dependence. Application of the principle is illustrated by means of a popular material model.


2013 ◽  
Vol 554-557 ◽  
pp. 151-156 ◽  
Author(s):  
Mehdi Saboori ◽  
Javad Gholipour ◽  
Henri Champliaud ◽  
Augustin Gakwaya ◽  
Jean Savoie ◽  
...  

Increasing acceptance and use of hydroforming technology within the aerospace industry requires a comprehensive understanding of critical issues such as the material characteristics, friction condition and hydroformability of the material. Moreover, the cost of experiments that can be reduced by accurate finite element modeling (FEM), which entails the application of adapted constitutive laws for reproducing with confidence the material behavior. In this paper, the effect of different constitutive laws on FEM of tubular shapes is presented. The free expansion process was considered for developing the FEM. Bulge height, thickness reduction and strains were determined at the maximum bulge height using different constitutive models, including Hollomon, Ludwik, Swift, Voce, Ludwigson. In order to minimize the effect of friction, the free expansion experiments were performed with no end feeding. The simulation results were compared with the experimental data to find the appropriate constitutive law for the free expansion process.


2019 ◽  
Vol 47 (1) ◽  
pp. 2-30 ◽  
Author(s):  
Gautam Sagar ◽  
Dong Zheng ◽  
Anuwat Suwannachit ◽  
Maik Brinkmeier ◽  
Kristin Fietz ◽  
...  

ABSTRACT It is widely known that filler-reinforced rubber material in tires shows a very complicated material behavior when subjected to cyclic loadings. One of the most interesting effects for rolling tires is the nonlinear rate-dependent behavior, which is implicitly linked to the amplitude dependency of dynamic stiffness (Payne effect) at a given frequency and temperature. This effect, however, cannot be described by a conventional linear viscoelastic constitutive law, e.g., the Prony series model. Several nonlinear viscoelastic material models have been proposed in the last decades. Among others, Lapczyk et al. (Lapczyk, I., Hurtado, J. A., and Govindarajan, S. M., “A Parallel Rheological Framework for Modeling Elastomers and Polymers,” 182nd Technical Meeting of the Rubber Division of the American Chemical Society, Cincinnati, Ohio, October 2012) recently proposed a quite general framework for the class of nonlinear viscoelasticity, called parallel rheological framework (PRF), which is followed by Abaqus. The model has an open option for different types of viscoelastic creep laws. In spite of the very attractive nonlinear rate-dependency, the identification of material parameters becomes a very challenging task, especially when a wide frequency and amplitude range is of interest. This contribution points out that the creep law is numerically sound if it can be degenerated to the linear viscoelastic model at a very small strain amplitude, which also significantly simplifies model calibration. More precisely, the ratio between viscoelastic stress and strain rate has to converge to a certain value, i.e., the viscosity in a linear viscoelastic case. The creep laws implemented in Abaqus are discussed in detail here, with a focus on their fitting capability. The conclusion of the investigation consequently gives us a guideline to develop a new creep law in PRF. Here, one creep law from Abaqus that meets the requirements of our guideline has been selected. A fairly good fit of the model is shown by the comparison of the simulated complex modulus in a wide frequency and amplitude range with experimental results.


2011 ◽  
Vol 48-49 ◽  
pp. 443-447 ◽  
Author(s):  
Li Chen ◽  
Heng Bo Xiang ◽  
Yong Zhang

Prestressed concrete material structures have the properties of higher crack resistance, higher degree of solidity and lighter weight. A new analytical method is proposed to investigate the dynamic deflection responses of the partially prestressed concrete beams subjected to blast loads. The new method uses an equivalent single degree of freedom system, which combines an elasto/viscoplastic rate-sensitive material model with the proposed static layered section approach. The analytical results agree well with the test data.


Sign in / Sign up

Export Citation Format

Share Document