Tensile Properties of Boiler Materials for FAD Based Failure Analysis

2003 ◽  
Author(s):  
Fred V. Ellis
Keyword(s):  
Standard Deviation ◽  
Yield Strength ◽  
Tensile Properties ◽  
Strain Hardening Exponent ◽  
Least Squares Regression ◽  
Data Compilation ◽  
Failure Assessment ◽  
Component Material ◽  
Tensile Data ◽  
Boiler Materials

Failure assessment of components with crack-like flaws are performed using the Failure Assessment Diagram (FAD) approach. Both fracture toughness and tensile properties of the component material are required for the analysis. The temperature dependence for the tensile properties of yield strength, flow stress, and ratio of yield strength to ultimate tensile strength were studied. The yield/tensile ratio is used to estimate the strain hardening exponent. The materials include carbon steel, 1/2Cr to 9Cr-1Mo steels, 1CrMoV rotor material, and 422 stainless steel bolting material. The tensile data was from the NRIM data compilation. Least squares regression was performed for log of the tensile property as the dependent variable and a sixth order Chebyshev polynomials in temperature. In general, the fits were good based on comparisons of the observed and calculated, specifically the mean at each temperature, the standard deviation, and the R2 value. The distribution function was shown to be normal. Values for the regression coefficients and standard deviation in log Y are tabulated.

DOGAL LAD

Alloy Digest ◽  
2011 ◽  
Vol 60 (10) ◽  
Keyword(s):  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Minimum Yield

Abstract Dogal 300 LAD, 340 LAD, 380 LAD, 420 LAD, 460 LAD and 500 LAD are high-strength low alloyed steels intended for pressing. The designation in the name is the guaranteed minimum yield strength. Dogal steels can be zinc coated. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on surface qualities as well as forming, heat treating, joining, and surface treatment. Filing Code: CS-167. Producer or source: SSAB Swedish Steel Inc..

VALLOUREC VM 85 13Cr

Alloy Digest ◽  
2016 ◽  
Vol 65 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Carbon ◽  
Sour Service ◽  
Minimum Yield

Abstract Vallourec VM 85 13Cr (minimum yield strength 85 ksi, or 586 MPa) is a low alloy carbon steel for use in oil country tubular goods as a material suitable for sour service. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming. Filing Code: CS-198. Producer or source: Vallourec USA Corporation.

VALLOUREC VM 90 13CR

Alloy Digest ◽  
2016 ◽  
Vol 65 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Carbon ◽  
Sour Service ◽  
Minimum Yield

Abstract Vallourec VM 90 13CR (minimum yield strength 90 ksi, or 620 MPa) is a low alloy carbon steel for use in oil country tubular goods as a material suitable for sour service. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming. Filing Code: CS-197. Producer or source: Vallourec USA Corporation.

DOGAL H 700 LAD

Alloy Digest ◽  
2015 ◽  
Vol 64 (3) ◽  
Keyword(s):  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Rolled Steel ◽  
Bend Strength ◽  
Hot Rolled ◽  
Hot Rolled Steel ◽  
Minimum Yield

Abstract Dogal H 700 LAD is a galvanized hot rolled steel that is microalloyed and can be cold formed. The 700 signifies the minimum yield strength. This datasheet provides information on composition, physical properties, tensile properties. and bend strength. It also includes information on forming. Filing Code: CS-184. Producer or source: SSAB Swedish Steel Inc..

STRENX 960MC

Alloy Digest ◽  
2016 ◽  
Vol 65 (11) ◽  
Keyword(s):  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Minimum Yield

Abstract Strenx 960MC is a hot-rolled structural steel made for cold forming, with minimum yield strength of 960 MPa (139 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S960MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-772. Producer or source: SSAB Swedish Steel Inc..

N-A-XTRA M800

Alloy Digest ◽  
2016 ◽  
Vol 65 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Structural Steel ◽  
Tensile Properties ◽  
Impact Energy ◽  
Heat Treating ◽  
Service Temperature ◽  
Minimum Yield ◽  
Minimum Impact

Abstract N-A-XTRA M800 is a quenched and tempered structural steel produced as heavy plates. N-A-XTRA steel can be supplied in six different grades with a minimum yield strength of 550, 620, 700 and 800 MPa (79.8, 89.9, 101.5 and 116.0 ksi). Some grades are delivered with different toughness properties. This last quality is for low service temperature with minimum impact energy at -40 deg C (-40 deg F) for grade N-A-XTRA M in a thickness range from 3 to 120 mm (0.118 to 4.724 in.). This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-771. Producer or source: ThyssenKrupp Steel Europe AG.

RUUKKI RAEX 300

Alloy Digest ◽  
2012 ◽  
Vol 61 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
Impact Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Structural Components ◽  
Wear Resistant

Abstract RUUKKI RAEX 300 (typical yield strength 900 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-643. Producer or source: Rautaruukki Corporation.

SUPRALSIM 690

Alloy Digest ◽  
2011 ◽  
Vol 60 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Tensile Properties ◽  
High Yield ◽  
Bend Strength ◽  
High Yield Strength ◽  
Weight Saving

Abstract Supralsim 690 is high yield strength steel for welded and weight-saving structures. This datasheet provides information on composition, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming and joining. Filing Code: SA-637. Producer or source: Industeel USA, LLC.

XABO 890

Alloy Digest ◽  
2017 ◽  
Vol 66 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Structural Steel ◽  
Tensile Properties ◽  
Heat Treating ◽  
Heavy Plate ◽  
Minimum Yield

Abstract XABO 890 (minimum yield strength of 890 MPa, or 129 ksi, for thicknesses up to 50 mm, or 2.0 in.) is a quenched and tempered structural steel used for heavy plate products in thicknesses up to 100 mm (3.9 in.) This datasheet provides information on composition, microstructureand tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-784. Producer or source: ThyssenKrupp Steel Europe AG.

STRENX 700

Alloy Digest ◽  
2017 ◽  
Vol 66 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Load Bearing ◽  
Minimum Yield

Abstract Strenx 700 is a high-strength structural steel with a minimum yield strength of 650–700 MPa (94–102 ksi) depending on thickness. Strenx 700 meets the requirements of EN 10 025-6 for the S690 grade and thicknesses. Typical applications include demanding load-bearing structures. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-779. Producer or source: SSAB Swedish Steel Inc..

Sign in / Sign up

Export Citation Format

Share Document