Plastic Collapse Assessment Procedure for Vessel With Local Thin Area Simultaneously Subjected to Internal Pressure and External Bending Moment
Assessment of the local thin area should be undertaken for both tension and compression bending. In this paper, simplified reference stresses for a flaw in a cylinder are proposed. By using these results, a newly-developed p-M (internal pressure ratio and external bending moment ratio) diagram which can evaluate the plastic collapse condition for pressure equipment such as vessels, piping and storage tanks with a local thin area simultaneously subjected to internal pressure, p, and external bending moment, M, due to earthquake, etc. is proposed. The p-M line is verified by comparison with the FEA results and the numerous results of experiment for a cylinder with a volumetric flaw obtained through the reference literatures. It was clarified that the differences in plastic collapse limit between the p-M line and DNV guideline under both internal pressure and compression moment became evident where the outer diameter/wall thickness of a cylinder is large and the yield ratio of the material is small.