An improved DS acoustic-seismic modality fusion algorithm based on a new cascaded fuzzy classifier for ground-moving targets classification in wireless sensor networks

Author(s):  
Qiang Pan ◽  
Jianming Wei ◽  
Hongbing Cao ◽  
Na Li ◽  
Haitao Liu
Sensors ◽  
2019 ◽  
Vol 19 (17) ◽  
pp. 3638 ◽  
Author(s):  
Yan Wang ◽  
Huihui Jie ◽  
Long Cheng

As one of the most essential technologies, wireless sensor networks (WSNs) integrate sensor technology, embedded computing technology, and modern network and communication technology, which have become research hotspots in recent years. The localization technique, one of the key techniques for WSN research, determines the application prospects of WSNs to a great extent. The positioning errors of wireless sensor networks are mainly caused by the non-line of sight (NLOS) propagation, occurring in complicated channel environments such as the indoor conditions. Traditional techniques such as the extended Kalman filter (EKF) perform unsatisfactorily in the case of NLOS. In contrast, the robust extended Kalman filter (REKF) acquires accurate position estimates by applying the robust techniques to the EKF in NLOS environments while losing efficiency in LOS. Therefore it is very hard to achieve high performance with a single filter in both LOS and NLOS environments. In this paper, a localization method using a robust extended Kalman filter and track-quality-based (REKF-TQ) fusion algorithm is proposed to mitigate the effect of NLOS errors. Firstly, the EKF and REKF are used in parallel to obtain the location estimates of mobile nodes. After that, we regard the position estimates as observation vectors, which can be implemented to calculate the residuals in the Kalman filter (KF) process. Then two KFs with a new observation vector and equation are used to further filter the estimates, respectively. At last, the acquired position estimates are combined by the fusion algorithm based on the track quality to get the final position vector of mobile node, which will serve as the state vector of both KFs at the next time step. Simulation results illustrate that the TQ-REKF algorithm yields better positioning accuracy than the EKF and REKF in the NLOS environment. Moreover, the proposed algorithm achieves higher accuracy than interacting multiple model algorithm (IMM) with EKF and REKF.


2010 ◽  
Vol 27 (1) ◽  
pp. 46 ◽  
Author(s):  
Aysegul Alaybeyoglu ◽  
Kayhan Erciyes ◽  
Aylin Kantarci ◽  
Orhan Dagdeviren

Sensors ◽  
2017 ◽  
Vol 17 (11) ◽  
pp. 2555 ◽  
Author(s):  
Tengyue Zou ◽  
Yuanxia Wang ◽  
Mengyi Wang ◽  
Shouying Lin

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 784 ◽  
Author(s):  
Jiayao Wang ◽  
Olamide Tawose ◽  
Linhua Jiang ◽  
Dongfang Zhao

The wireless sensor network (WSN) is mainly composed of a large number of sensor nodes that are equipped with limited energy and resources. Therefore, energy consumption in wireless sensor networks is one of the most challenging problems in practice. On the other hand, data fusion can effectively decrease data redundancy, reduce the amount of data transmission and energy consumption in the network, extend the network life cycle, improve the utilization of bandwidth, and thus overcome the bottleneck on energy and bandwidth consumption. This paper proposes a new data fusion algorithm based on Hesitant Fuzzy Entropy (DFHFE). The new algorithm aims to reduce the collection of repeated data on sensor nodes from the source, and strives to utilize the information provided by redundant data to improve the data reliability. Hesitant fuzzy entropy is exploited to fuse the original data from sensor nodes in the cluster at the sink node to obtain higher quality data and make local decisions on the events of interest. The sink nodes periodically send local decisions to the base station that aggregates the local decisions and makes the final judgment, in which process the burden for the base station to process all the data is significantly released. According to our experiments, the proposed data fusion algorithm greatly improves the robustness, accuracy, and real-time performance of the entire network. The simulation results demonstrate that the new algorithm is more efficient than the state-of-the-art in terms of both energy consumption and real-time performance.


Sign in / Sign up

Export Citation Format

Share Document