Nonlinear ultrasound to characterize dislocation-based damage in classical and rolling contact fatigue

2021 ◽  
Vol 150 (4) ◽  
pp. A39-A40
Author(s):  
Kathryn Matlack
Keyword(s):  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Nonlinear Ultrasound

Rolling Contact Fatigue of Wheel and Rail

2012 ◽  
Vol 54 (5) ◽  
pp. 304-312
Author(s):  
Florian Dörner ◽  
Otto Kleiner ◽  
Christian Schindler ◽  
Peter Starke ◽  
Dietmar Eifler
Keyword(s):  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact

scholarly journals Hydrogen-assisted microcrack formation in bearing steels under rolling contact fatigue

2020 ◽  
Vol 134 ◽  
pp. 105485
Author(s):  
X.Z. Liang ◽  
G.-H. Zhao ◽  
J. Owens ◽  
P. Gong ◽  
W.M. Rainforth ◽  
...  
Keyword(s):  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Bearing Steels ◽  
Microcrack Formation

Effect of Grain Flow Orientation on Rolling Contact Fatigue Life of AISI M-50

1982 ◽  
Vol 104 (3) ◽  
pp. 330-334 ◽  
Author(s):  
A. H. Nahm
Keyword(s):  
Fatigue Life ◽  
Flow Line ◽  
Flow Direction ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Vacuum Arc ◽  
Type I ◽  
Grain Flow ◽  
Contact Fatigue Life

Accelerated rolling contact fatigue tests were conducted to study the effect of grain flow orientation on the rolling contact fatigue life of vacuum induction melted and vacuum arc remelted (VIM-VAR) AISI M-50. Cylindrical test bars were prepared from a billet with 0, 45, and 90 deg orientations relative to billet forging flow direction. Tests were run at a Hertzian stress of 4,826 MPa with a rolling speed of 12,500 rpm at room temperature, and lubricated with Type I (MIL-L-7808G) oil. It was observed that rolling contact fatigue life increased when grain flow line direction became more parallel to the rolling contact surface.

Service Loading Analysis of Wind Turbine Gearbox Rolling Bearings Based on X-Ray Diffraction Residual Stress Measurements

2013 ◽  
Vol 768-769 ◽  
pp. 723-732 ◽  
Author(s):  
Jürgen Gegner ◽  
Wolfgang Nierlich
Keyword(s):  
Residual Stress ◽  
Wind Turbine ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
X Ray Diffraction ◽  
Rolling Bearings ◽  
Wind Turbine Gearbox ◽  
X Ray ◽  
Stress Measurements

Rolling bearings in wind turbine gearboxes occasionally fail prematurely by so-called white etching cracks. The appearance of the damage indicates brittle spontaneous tensile stress induced surface cracking followed by corrosion fatigue driven crack growth. An X-ray diffraction based residual stress analysis reveals vibrations in service as the root cause. The occurrence of high local friction coefficients in the rolling contact is described by a tribological model. Depth profiles of the equivalent shear and normal stresses are compared with residual stress patterns and a relevant fracture strength, respectively. White etching crack failures are reproduced on a rolling contact fatigue test rig under increased mixed friction. Causative vibration loading is evident from residual stress measurements. Cold working compressive residual stresses are an effective countermeasure.

Sign in / Sign up

Export Citation Format

Share Document