scholarly journals Automated Assessment of Digital Terrain Models Derived From Airborne Laser Scanning Automatische Qualitätsbeschreibung der Höhenmodelle aus luftgestützten Lasermessungen

2012 ◽  
Vol 2012 (2) ◽  
pp. 105-114 ◽  
Author(s):  
Jan Skaloud ◽  
Philipp Schaer
Keyword(s):  
Laser Scanning ◽  
Airborne Laser Scanning ◽  
Digital Terrain Models ◽  
Automated Assessment ◽  
Digital Terrain ◽  
Terrain Models ◽  
Airborne Laser

Application of the Msplit method for filtering airborne laser scanning data-sets to estimate digital terrain models

2015 ◽  
Vol 36 (9) ◽  
pp. 2421-2437 ◽  
Author(s):  
Wioleta Błaszczak-Bąk ◽  
Artur Janowski ◽  
Waldemar Kamiński ◽  
Jacek Rapiński
Keyword(s):  
Laser Scanning ◽  
Airborne Laser Scanning ◽  
Data Sets ◽  
Digital Terrain Models ◽  
Digital Terrain ◽  
Terrain Models ◽  
Airborne Laser

scholarly journals Airborne laser scanning and usefulness for hydrological models

2005 ◽  
Vol 5 ◽  
pp. 57-63 ◽  
Author(s):  
M. Hollaus ◽  
W. Wagner ◽  
K. Kraus
Keyword(s):  
Laser Scanning ◽  
Laser Scanner ◽  
Airborne Laser Scanning ◽  
Scanner Data ◽  
Digital Terrain Models ◽  
Mountainous Regions ◽  
Digital Terrain ◽  
Terrain Models ◽  
Airborne Laser ◽  
Land Cover Maps

Abstract. Digital terrain models form the basis for distributed hydrologic models as well as for two-dimensional hydraulic river flood models. The technique used for generating high accuracy digital terrain models has shifted from stereoscopic aerial-photography to airborne laser scanning during the last years. Since the disastrous floods 2002 in Austria, large airborne laser-scanning flight campaigns have been carried out for several river basins. Additionally to the topographic information, laser scanner data offer also the possibility to estimate object heights (vegetation, buildings). Detailed land cover maps can be derived in conjunction with the complementary information provided by high-resolution colour-infrared orthophotos. As already shown in several studies, the potential of airborne laser scanning to provide data for hydrologic/hydraulic applications is high. These studies were mostly constraint to small test sites. To overcome this spatial limitation, the current paper summarises the experiences to process airborne laser scanner data for large mountainous regions, thereby demonstrating the applicability of this technique in real-world hydrological applications.

Interpreting cultural remains in airborne laser scanning generated digital terrain models: effects of size and shape on detection success rates

2013 ◽  
Vol 40 (12) ◽  
pp. 4688-4700 ◽  
Author(s):  
Ole Risbøl ◽  
Ole Martin Bollandsås ◽  
Anneli Nesbakken ◽  
Hans Ole Ørka ◽  
Erik Næsset ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Airborne Laser Scanning ◽  
Success Rates ◽  
Digital Terrain Models ◽  
Size And Shape ◽  
Digital Terrain ◽  
Terrain Models ◽  
Airborne Laser

scholarly journals Accuracy Assessment of Point Clouds from LiDAR and Dense Image Matching Acquired Using the UAV Platform for DTM Creation

2018 ◽  
Vol 7 (9) ◽  
pp. 342 ◽  
Author(s):  
Adam Salach ◽  
Krzysztof Bakuła ◽  
Magdalena Pilarska ◽  
Wojciech Ostrowski ◽  
Konrad Górski ◽  
...  
Keyword(s):  
Land Cover ◽  
Laser Scanning ◽  
Point Clouds ◽  
Data Sources ◽  
Digital Terrain Models ◽  
Vegetation Height ◽  
Digital Terrain ◽  
Terrain Models ◽  
Airborne Laser ◽  
Vertical Accuracy

In this paper, the results of an experiment about the vertical accuracy of generated digital terrain models were assessed. The created models were based on two techniques: LiDAR and photogrammetry. The data were acquired using an ultralight laser scanner, which was dedicated to Unmanned Aerial Vehicle (UAV) platforms that provide very dense point clouds (180 points per square meter), and an RGB digital camera that collects data at very high resolution (a ground sampling distance of 2 cm). The vertical error of the digital terrain models (DTMs) was evaluated based on the surveying data measured in the field and compared to airborne laser scanning collected with a manned plane. The data were acquired in summer during a corridor flight mission over levees and their surroundings, where various types of land cover were observed. The experiment results showed unequivocally, that the terrain models obtained using LiDAR technology were more accurate. An attempt to assess the accuracy and possibilities of penetration of the point cloud from the image-based approach, whilst referring to various types of land cover, was conducted based on Real Time Kinematic Global Navigation Satellite System (GNSS-RTK) measurements and was compared to archival airborne laser scanning data. The vertical accuracy of DTM was evaluated for uncovered and vegetation areas separately, providing information about the influence of the vegetation height on the results of the bare ground extraction and DTM generation. In uncovered and low vegetation areas (0–20 cm), the vertical accuracies of digital terrain models generated from different data sources were quite similar: for the UAV Laser Scanning (ULS) data, the RMSE was 0.11 m, and for the image-based data collected using the UAV platform, it was 0.14 m, whereas for medium vegetation (higher than 60 cm), the RMSE from these two data sources were 0.11 m and 0.36 m, respectively. A decrease in the accuracy of 0.10 m, for every 20 cm of vegetation height, was observed for photogrammetric data; and such a dependency was not noticed in the case of models created from the ULS data.

scholarly journals Accuracy of Ground Surface Interpolation from Airborne Laser Scanning (ALS) Data in Dense Forest Cover

2020 ◽  
Vol 9 (4) ◽  
pp. 224
Author(s):  
Mihnea Cățeanu ◽  
Arcadie Ciubotaru
Keyword(s):  
Thin Plate ◽  
Laser Scanning ◽  
Ground Surface ◽  
Forest Vegetation ◽  
Airborne Laser Scanning ◽  
Canopy Density ◽  
Digital Terrain ◽  
Airborne Laser ◽  
Dense Forest

A digital model of the ground surface has many potential applications in forestry. Nowadays, Light Detection and Ranging (LiDAR) is one of the main sources for collecting morphological data. Point clouds obtained via laser scanning are used for modelling the ground surface by interpolation, a process which is affected by various errors. Using LiDAR data to collect ground surface data for forestry applications is a challenging scenario because the presence of forest vegetation will hinder the ability of laser pulses to reach the ground. The density of ground observations will be therefore reduced and not homogenous (as it is affected by the variations in canopy density). Furthermore, forest areas are generally present in mountainous areas, in which case the interpolation of the ground surface is more challenging. In this paper, we present a comparative analysis of interpolation accuracy for nine algorithms, which are used for generating Digital Terrain Models from Airborne Laser Scanning (ALS) data, in mountainous terrain covered by dense forest vegetation. For most of the algorithms we find a similar performance in terms of general accuracy, with RMSE values between 0.11 and 0.28 m (when model resolution is set to 0.5 m). Five of the algorithms (Natural Neighbour, Delauney Triangulation, Multilevel B-Spline, Thin-Plate Spline and Thin-Plate Spline by TIN) have vertical errors of less than 0.20 m for over 90 percent of validation points. Meanwhile, for most algorithms, major vertical errors (of over 1 m) are associated with less than 0.05 percent of validation points. Digital Terrain Model (DTM) resolution, ground slope and point cloud density influence the quality of the ground surface model, while for canopy density we find a less significant link with the quality of the interpolated DTMs.

Sign in / Sign up

Export Citation Format

Share Document