Steady Fluid Flow to a Radial System of Horizontal Wells

2018 ◽  
Vol 59 (2) ◽  
pp. 273-280 ◽  
Author(s):  
P. E. Morozov
SPE Journal ◽  
2018 ◽  
Vol 23 (05) ◽  
pp. 1603-1614 ◽  
Author(s):  
Wanjing Luo ◽  
Changfu Tang ◽  
Yin Feng

Summary This study aims to develop a semianalytical model to calculate the productivity index (PI) of a horizontal well with pressure drop along the wellbore. It has been indicated that by introducing novel definitions of horizontal-well permeability and conductivity, the equation of fluid flow along a horizontal well with pressure drop has the same form as the one for fluid flow in a varying-conductivity fracture. Thus, the varying-conductivity-fracture model and PI model can be used to obtain the PI of a horizontal well. Results indicate that the PI of a horizontal well depends on the interaction between horizontal-well conductivity, penetration ratio, and Reynolds number. New type curves of the penetration ratios with various combinations of parameters have been presented. A complete-penetration zone and a partial-penetration zone can be identified on the type curves. Based on the type curves, two examples have also been presented to illustrate the advantages of this work in optimizing parameters of horizontal wells.


SPE Journal ◽  
2014 ◽  
Vol 20 (02) ◽  
pp. 337-346 ◽  
Author(s):  
Kan Wu ◽  
Jon E. Olson

Summary Successfully creating multiple hydraulic fractures in horizontal wells is critical for unconventional gas production economically. Optimizing the stimulation of these wells will require models that can account for the simultaneous propagation of multiple, potentially nonplanar, fractures. In this paper, a novel fracture-propagation model (FPM) is described that can simulate multiple-hydraulic-fracture propagation from a horizontal wellbore. The model couples fracture deformation with fluid flow in the fractures and the horizontal wellbore. The displacement discontinuity method (DDM) is used to represent the mechanics of the fractures and their opening, including interaction effects between closely spaced fractures. Fluid flow in the fractures is determined by the lubrication theory. Frictional pressure drop in the wellbore and perforation zones is taken into account by applying Kirchoff's first and second laws. The fluid-flow rates and pressure compatibility are maintained between the wellbore and the multiple fractures with Newton's numerical method. The model generates physically realistic multiple-fracture geometries and nonplanar-fracture trajectories that are consistent with physical-laboratory results and inferences drawn from microseismic diagnostic interpretations. One can use the simulation results of the FPM for sensitivity analysis of in-situ and fracture treatment parameters for shale-gas stimulation design. They provide a physics-based complex fracture network that one can import into reservoir-simulation models for production analysis. Furthermore, the results from the model can highlight conditions under which restricted width occurs that could lead to proppant screenout.


2012 ◽  
Vol 490-495 ◽  
pp. 2205-2209
Author(s):  
Jun Feng Liu ◽  
Hai Min Guo

There are big difference of fluid flow patterns between horizontal wells and vertical wells, so the current interpretation models of production logging multiphase flow in vertical wells are not suitable for data interpretation in highly deviated and horizontal wells. In this paper, firstly, the two-phase flow (oil-water and gas-water) simulation experiments have been carried out in large-diameter (0.124 meter internal diameter) uphill, horizontal and downhill Plexiglas pipe with practical production logging tools. Secondly, based on the conclusions of fluid flow mechanism from experimental data analysis, and considering the affecting factors (i.e. Logging tool and well deviation ), we have obtained slip velocity model after well deviation correction in highly deviated and horizontal wells, which have been corrected by the mature interpretation models. Finally, this proposed method has been proved correct and feasible through the experimental data validation.


1998 ◽  
Author(s):  
Liang-Biao Ouyang ◽  
Nicholas Petalas ◽  
Sepehr Arbabi ◽  
Donald E. Schroeder ◽  
Khalid Aziz

2010 ◽  
Vol 22 (1) ◽  
pp. 44-50 ◽  
Author(s):  
Xiao-dong Wang ◽  
Ying-fang Zhou ◽  
Wan-jing Luo
Keyword(s):  

2009 ◽  
Vol 12 (01) ◽  
pp. 68-78 ◽  
Author(s):  
Hong'en Dou ◽  
Changchun Chen ◽  
Yu Wen Chang ◽  
Yanjun Fang ◽  
Xinbin Chen ◽  
...  

Summary Intercampo oil field, which contains unconsolidated reservoirs driven by edge water and bottom water, is characterized by heavy oil with mid-high permeability and high oil saturation. The three classical models of the Arps model were applied in 13 horizontal and vertical wells in the oil field; also, the paper introduces two models that are not widely applied for decline analysis and forecasting in the wells. Decline features between vertical and horizontal wells were compared. The results accord well with the actual data from the oil field. The authors point out that these decline analysis models are applicable not only for vertical wells but also for horizontal wells. The authors would like to emphasize that four decline models discussed in the paper. In regard to screening and comparison of decline analysis models, this paper illustrates how to select and use a model, as well as the model's application conditions and their features. The screened models are recommended for production performance analysis of wells, reservoirs and oil fields. Introduction Existing decline curve analysis techniques, which include three Arps models (exponential, hyperbolic, and harmonic, 1945), and the Fetkovich model (1980), are derived empirically; the Arps models are still the preferred method for forecasting oil production and proven reserve. These methods have played a very important role in the exploration and development of oil fields worldwide (Arps 1945, Arps 1956, Fetkovich et al. 1980, Fetkovich et al. 1987, Fetkovich et al. 1996). Gentry and McCray (1978) presented a method to define decline curve. They claimed their equation might be superior to the Arps equations by defining certain decline curves. However, the model was derived from the hyperbolic model of the Arps model; their equation has a parameter qi of initial production rate computed by the Darcy Law. This means that the application of their method requires more parameters, such as relative permeability curve, radius of drainage, formation thickness, reservoir pressure at external drainage radius, and well bore terminal pressure. On this point, in their example the extrapolation with their model is not seen because the method is not a pure production-time relationship. Furthermore, use of this model to extrapolate future production is restricted by the data requirements. Li and Horne (2002, 2005) developed an analytical model, called the Li-Horne model, based on fluid flow mechanisms. The model was developed under the spontaneous water imbibition condition. Li and Horne also thought it difficult to predict which Arps equation a reservoir would follow. However, they made a conceptual error in their reasoning of the Arps models. In fact, we need to judge the decline type before using the Arps model to make production decline analysis. Li and Horne used only two special cases of decline exponent, n = 0 and 1, then compared the exponential model and harmonic model with any models. Hence, we think Li and Horne's comparison of several oil fields is not meaningful in cases where they did not get a concrete decline exponent n. When the Li-Horne model was applied to the actual oil fields, the values of a0 and b0 were regressed from the actual oilfield data, but not the calculation values from their equations. Because the models constants of the Arps and Li-Horne model regress from the actual oil fields, they include different reservoir type and fluid flow information (high permeability, low permeability, naturally fractured low permeability, complex, fault reservoir, etc.; single flow and multiphase flow, etc.). Therefore, the decline analysis models based on purely statistical models do not have any association with fluid flow mechanism, reservoir types, fluids characteristics, steady or unsteady flow, and single or multiphase flow. We are inclined to refer to this as an empirical rather than an analytical model. The other two decline analysis models introduced in this paper, the Orstrand-Weng model (Arps 1945, Weng 1992) and the T model, were both proposed for predicting oil field production in China during the 1980s. The main purpose of this paper is to compare application conditions and results among four models: Arps, Orstrand-Weng, T and the Li-Horne model.


Sign in / Sign up

Export Citation Format

Share Document