Use of Electroplating for Increasing the Efficiency and Quality of Impregnation of a Porous Graphitized Carbon Material with Copper Alloys

2020 ◽  
Vol 2020 (7) ◽  
pp. 746-751
Author(s):  
V. A. Gulevskii ◽  
V. I. Antipov ◽  
L. V. Vinogradov ◽  
N. Yu. Miroshkin ◽  
V. V. Gulevskii ◽  
...  
2021 ◽  
Vol 1028 ◽  
pp. 326-330
Author(s):  
Otong Nurhilal ◽  
Sahrul Hidayat ◽  
Dadan Sumiarsa ◽  
Maykel Manawan ◽  
Risdiana

The quality of the carbon material for application of electrodes in the battery is indicated by its ability to intercalate ions, atoms or molecules. Graphite is a carbon material with good intercalation capability. In this research, a carbon material in the form of activated charcoal produced from biomass of water hyacinth has been prepared, which is carbonized at various temperatures of 400, 500, and 600 °C with three different activators of ZnCl2, KOH and H3PO4. The activated charcoal will be used as a cathode composite in lithium sulfur batteries. To determine the quality of the activated charcoal, the structure properties of activated charcoal were characterized using X-ray diffraction (XRD). Several parameters that are determined from XRD data included the degree of crystallinity, and the degree of graphitization (Y). The degree of crystallinity was found in the ranges between 5.56 and 12.6%, where activated charcoal was dominated by amorphous structures. The value of the degree of graphitization was about 36%.


RSC Advances ◽  
2012 ◽  
Vol 2 (5) ◽  
pp. 1755 ◽  
Author(s):  
Zheng Chen ◽  
Ding Weng ◽  
Hiesang Sohn ◽  
Mei Cai ◽  
Yunfeng Lu

Sign in / Sign up

Export Citation Format

Share Document