Structural Integrity Assessment and Lifetime Prediction for Inermediate Rod Bayonets Control Bayonets of Control and Protection Systems of the WWER-440 Reactor: Part 2. Structural Integrity Analysis of Bayonet and Justification of Monitoring Period of Degradation Its Metal

2021 ◽  
Vol 12 (6) ◽  
pp. 1675-1683
Author(s):  
A. J. Minkin ◽  
B. Z. Margolin ◽  
V. G. Fedosov
Keyword(s):  
Structural Integrity ◽  
Lifetime Prediction ◽  
Monitoring Period ◽  
Integrity Assessment ◽  
Protection Systems ◽  
Integrity Analysis

Probabilistic Structural Integrity Analysis of Reactor Pressure Vessels During PTS Events

2012 ◽  
Author(s):  
Kunio Onizawa ◽  
Koichi Masaki ◽  
Jinya Katsuyama
Keyword(s):  
Crack Initiation ◽  
Structural Integrity ◽  
Fracture Probability ◽  
Pressure Vessels ◽  
Sensitivity Analyses ◽  
Conditional Probabilities ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Integrity Analysis ◽  
Reactor Pressure

In order to apply a probabilistic fracture mechanics (PFM) analysis to the structural integrity assessment of a reactor pressure vessel (RPV), PFM analysis code has been developed at JAEA. Using the PFM analysis code, PASCAL version 3, the conditional probabilities of crack initiation and fracture for an RPV during pressurized thermal shock events have been analyzed. Sensitivity analyses on some input parameters were performed to clarify the effect on the conditional fracture probability. Comparison between the conditional probabilities and temperature margin (ΔTm) from current deterministic analysis method were made for some model plant conditions of domestic typical old-type RPVs. From the analyses, a good correlation between ΔTm and the conditional probability of crack initiation was obtained.

Structural Integrity for Nuclear Power Plant Against Excessive Load on Design Extension Condition

2013 ◽  
Author(s):  
Daigo Watanabe ◽  
Kiminobu Hojo
Keyword(s):  
Nuclear Power ◽  
Structural Integrity ◽  
Safety Factors ◽  
Design Code ◽  
Acceptance Criteria ◽  
Integrity Assessment ◽  
Current Design ◽  
Factor Design ◽  
Excessive Load ◽  
Load And Resistance Factor

This paper introduces an example of structural integrity evaluation for Light Water Reactor (LWR) against excessive loads on the Design Extension Condition (DEC). In order to assess the design acceptance level of DEC, three acceptance criteria which are the stress basis limit of the current design code, the strain basis limit of the current design code and the strain basis limit by using Load and Resistance Factor Design (LRFD) method were applied. As a result the allowable stress was increased by changing the acceptance criteria from the stress basis limit to the strain basis limit. It is shown that the practical margin of the LWR’s components still keeps even on DEC by introducing an appropriate criterion for integrity assessment and safety factors.

Sign in / Sign up

Export Citation Format

Share Document