Saw transection of retained compression screws with damaged heads instead of removal in revision first metatarsal osteotomy: a technique tip

2021 ◽  
Vol 14 (1) ◽  
pp. e234868
Author(s):  
Radwane Faroug ◽  
Ali Abbassian
Keyword(s):  
Hallux Valgus ◽  
Significant Loss ◽  
Host Bone ◽  
Metatarsal Osteotomy ◽  
First Metatarsal ◽  
Scarf Osteotomy ◽  
Primary Surgery ◽  
Additional Equipment ◽  
Saw Blade ◽  
The Uk

Distal first metatarsal osteotomy is performed to correct hallux valgus. The surgery is being performed throughout the UK in increasing numbers. The osteotomies used are commonly fixed with one or two variable pitch compression screws. Recurrence of the deformity or inadequate correction in the primary surgery may require revision osteotomy which necessitates removal of previous screws. Revision rates for scarf osteotomy have been reported at 5%. Removal of screws can be challenging as they are often buried in bone and/or the screw heads can get damaged even despite meticulous preparation. Various techniques for removal of damaged screws are described, which require additional equipment and may result in significant loss of the host bone. We describe another technique where a standard Stryker TPS sagittal saw and saw blade (Kalamazoo, USA) are used to cut through the shaft of the compression screws in line with the planned revision osteotomy. We have successfully performed this on two occasions with good results, and describe our experience of using this technique which eliminates the need for complex over drilling procedures often required for removing stripped and retained screws

Comparison of Postoperative Height Changes of the Second Metatarsal Among 3 Osteotomy Methods for Hallux Valgus Deformity Correction

2016 ◽  
Vol 38 (1) ◽  
pp. 20-26 ◽  
Author(s):  
Jun Young Choi ◽  
Yu Min Suh ◽  
Ji Woong Yeom ◽  
Jin Soo Suh
Keyword(s):  
Hallux Valgus ◽  
Deformity Correction ◽  
Metatarsal Head ◽  
Valgus Deformity ◽  
Metatarsal Osteotomy ◽  
Level Of Evidence ◽  
First Metatarsal ◽  
Scarf Osteotomy ◽  
Hallux Valgus Deformity ◽  
Second Metatarsal

Background: We aimed to compare the postoperative height of the second metatarsal head relative to the first metatarsal head using axial radiographs among 3 different commonly used osteotomy techniques: proximal chevron metatarsal osteotomy (PCMO), scarf osteotomy, and distal chevron metatarsal osteotomy (DCMO). Methods: We retrospectively reviewed the radiographs and clinical findings of the patients with painful callosities under the second metatarsal head, complicated by hallux valgus, who underwent isolated PCMO, scarf osteotomy, or DCMO from February 2005 to January 2015. Each osteotomy was performed with 20 degrees of plantar ward obliquity. Along with lateral translation and rotation of the distal fragment to correct the deformity, lowering of the first metatarsal head was made by virtue of the oblique metatarsal osteotomy. Results: Significant postoperative change in the second metatarsal height was observed on axial radiographs in all groups; this value was greatest in the PCMO group (vs scarf: P = .013; vs DCMO: P = .008) but did not significantly differ between the scarf and DCMO groups ( P = .785). The power for second metatarsal height correction was significantly greater in the PCMO group (vs scarf: P = .0005; vs DCMO: P = .0005) but did not significantly differ between the scarf and DCMO groups ( P = .832). Conclusions: Among the 3 osteotomy techniques commonly used to correct hallux valgus deformity, we observed that PCMO yielded the most effective height change of the second metatarsal head. Level of Evidence: Level III, retrospective comparative series.

Proximal Crescentic Metatarsal Osteotomy: The Effect of Saw Blade Orientation on First Ray Elevation

2005 ◽  
Vol 26 (2) ◽  
pp. 152-157 ◽  
Author(s):  
Carroll Jones ◽  
Michael Coughlin ◽  
Ramon Villadot ◽  
Pau Golanó
Keyword(s):  
Hallux Valgus ◽  
Surgical Correction ◽  
New Technique ◽  
Coronal Plane ◽  
Metatarsal Osteotomy ◽  
Final Position ◽  
First Metatarsal ◽  
First Ray ◽  
A New Technique ◽  
Saw Blade

Background: Moderate and severe hallux valgus deformities generally require a proximal metatarsal osteotomy to correct a widened intermetatarsal angle. Although excellent results have been reported using the proximal crescentic osteotomy, concerns have been raised about the incidence of postoperative dorsal malunion, which may lead to transfer lesions. The objectives of this paper were to evaluate the influence of saw blade angulation on the final position of the first metatarsal and to test a new technique used to ensure proper orientation of the osteotomy. Methods: For part I of the study, 26 Sawbones® specimens with hallux valgus deformities were corrected using a proximal crescentic osteotomy with the saw blade position incrementally rotated in the coronal plane. The sagittal change in the final position of the metatarsal was quantified radiographically and correlated to the saw blade orientation. For part II of the study, a Kirschner wire was placed in a vertical position into the medial cuneiform to serve as a guide for the crescentic saw blade in 13 cadaver feet with hallux valgus. Metatarsus primus elevatus was measured after surgical correction. Results: Part I of the study demonstrated a highly linear relationship ( R2 = 0.95) between first metatarsal elevation and the orientation of the saw blade. Every 10-degree of saw blade angulation resulted in a 2-mm change in the sagittal position of the first metatarsal. In part II of the study, the average change in metatarsus primus elevation for the 13 specimens after surgical correction of the hallux valgus deformity was only 1.1 mm (range −3.9 to +4.9 mm). Eleven of the 13 specimens had less than 2.5 mm of elevatus. Conclusion: Dorsal malunion of the first metatarsal after proximal crescentic osteotomy is a recognized complication. The final position of the hallux metatarsal is influenced by the coronal plane orientation of the saw. A new technique is described to aid the surgeon in proper alignment of the saw and help prevent excessive first ray elevation.

scholarly journals Introduction the revolving scarf osteotomy for treating severe hallux valgus with an increased distal metatarsal articular angle: a retrospective cohort study

2019 ◽  
Vol 20 (1) ◽  
Author(s):  
Xinwen Wang ◽  
Qian Wen ◽  
Yi Li ◽  
Cheng Liu ◽  
Kai Zhao ◽  
...  
Keyword(s):  
Hallux Valgus ◽  
Avascular Necrosis ◽  
Metatarsal Head ◽  
Foot Deformities ◽  
Metatarsal Osteotomy ◽  
Aofas Score ◽  
First Metatarsal ◽  
Scarf Osteotomy ◽  
Vas Score ◽  
Akin Osteotomy

Abstract Background Hallux valgus(HV) with an increased distal metatarsal articular angle (DMAA) is one of the most common foot deformities among adults. Double metatarsal osteotomy (DMO) is effective in treating severe HV deformity with an increased DMAA. However, this technique presents the risk of avascular necrosis (AVN) of the metatarsal head and transfer metatarsalgia due to shortening of the first metatarsal. The aim of this study was to introduce a surgical procedure defined as revolving scarf osteotomy (RSO) and compare the clinical and radiological results of RSO and DMO performed for treating severe HV with an increased DMAA. Methods First metatarsal osteotomies and Akin osteotomy were performed in 56 patients (62 ft) with severe HV with an increased DMAA in Honghui Hospital from January 2015 to December 2017. RSO was performed in 32 ft and DMO was performed in 30 ft. The Akin osteotomy was performed in both groups. The American Orthopedic Foot and Ankle Society (AOFAS) score, visual analogue scale (VAS) score, the hallux valgus angle (HVA), intermetatarsal angle (IMA), DMAA, and first metatarsal length (FML) and the rates of complications were compared preoperatively and postoperatively in the two groups. Results The mean AOFAS score, VAS score, HVA, IMA, and DMAA showed significant improvements in both groups after surgery, but with no significant differences between the two groups. The postoperative FML was significantly larger in the RSO group than in the DMO group (p < 0.001). One of the 30 ft (3.3%) in the DMO group exhibited transfer metatarsalgia at 12 months postoperatively, while another foot (3.3%) in same group had avascular necrosis of the metatarsal head. One of the 30 ft (3.1%) in the RSO group had hallux varus. Conclusions No differences in the clinical and radiographic results were observed between the two groups with severe HV and an increased DMAA. However, RSO does not cause shortening of the metatarsal and AVN of the metatarsal head. A long-term, randomized, controlled prospective study with a larger sample would provide higher-level evidence for confirming the clinical efficacy and safety of RSO.

The assessment of adolescent hallux valgus before and after first metatarsal osteotomy

1981 ◽  
Vol 5 (2) ◽  
pp. 111-115 ◽  
Author(s):  
T. R. Allen ◽  
M. Gross ◽  
J. Miller ◽  
L. W. Lowe ◽  
W. C. Hutton
Keyword(s):  
Hallux Valgus ◽  
Metatarsal Osteotomy ◽  
First Metatarsal ◽  
Before And After

scholarly journals Radiographic Outcomes after Fixation of Distal Metatarsal Osteotomy for Hallux Valgus Using a Tension Band Construct

2019 ◽  
Vol 4 (4) ◽  
pp. 2473011419S0042
Author(s):  
Alexander Volpi ◽  
Robert Zbeda ◽  
Christopher Katchis ◽  
Lon Weiner ◽  
Stuart Katchis
Keyword(s):  
Hallux Valgus ◽  
Postoperative Period ◽  
Weight Bearing ◽  
Line Tension ◽  
Tension Band ◽  
Metatarsal Osteotomy ◽  
First Metatarsal ◽  
Distal Metatarsal Osteotomy ◽  
The Mean

Category: Bunion Introduction/Purpose: Hallux valgus is a common deformity of the forefoot. There are over 130 procedures described to correct hallux valgus. Classically, the treatment of mild to moderate hallux valgus is with a distal metatarsal osteotomy. A variety of fixation techniques have been described for use with this osteotomy most of which require partial or non-weight bearing until the osteotomy is healed. Tension Band fixation is a well-known principle in orthopedic surgery. The goal of the present study is to radiographically assess the maintenance of distal first metatarsal osteotomy fixation using a novel tension band device (Re+Line tension band bunion plate system, Nextremity Solutions) with immediate post-operative weight-bearing. Methods: The patient database for one surgeon was retrospectively reviewed for patients that underwent hallux valgus correction with the Re+Line tension band device between 2014 and 2017. Postoperative protocol included a soft dressing, firm surgical shoe, and weight-bearing as tolerated with a cane. Patients were excluded if fixation was achieved with something other than a tension band construct. Radiographs were obtained and reviewed retrospectively by 3 authors. Pre and postoperative hallux valgus (HVA) and intermetatarsal angles (IMA) were measured as described previously in the literature, and the changes in correction compared. Maintenance of correction and hardware integrity were assessed at final follow-up after weight bearing as tolerated in a surgical shoe in the postoperative period. Statistical analysis was performed using a Wilcoxon signed-rank test for the changes in HVA and IMA. Results: There was a total of 72 patients and 76 toes that underwent hallux valgus correction with a tension band construct, at a mean follow-up of 4.36 months. 68 of 72 patients were female. The average age was 60.8 years old. The mean preoperative HVA was 27.1 degrees. The mean postoperative HVA was 6.14 degrees, with a mean correction of 20.22 degrees (p<0.001). The mean preoperative IMA was 14.14 degrees. The mean postoperative IMA was 6.10 degrees, with a mean correction of 7.98 degrees (p<0.001). There was loss of reduction found in 6 of 76 toes (7.89%).There were zero cases of hardware failure. All osteotomies healed at final follow-up. Conclusion: This study shows successful radiographic outcome after hallux valgus correction using a tension band construct and allowing immediate full weight-bearing in a surgical shoe in the postoperative period. Significant deformity correction was achieved and maintained and all osteotomies healed. The Re+Line tension band bunion correction system can be safely used as a successful option to fix distal first metatarsal osteotomies, while allowing patients to fully weight bear in a surgical shoe postoperatively and potentially return to activities faster than when using traditional fixation methods. Future studies are needed to assess functional outcomes and patient satisfaction with this novel technique.

Three-Dimensional Analysis of the First Metatarsal Bone in Minimally Invasive Distal Linear Metatarsal Osteotomy for Hallux Valgus

2019 ◽  
Vol 41 (1) ◽  
pp. 84-93 ◽  
Author(s):  
Hiroyuki Seki ◽  
Satoshi Oki ◽  
Yasunori Suda ◽  
Kenichiro Takeshima ◽  
Tetsuro Kokubo ◽  
...  
Keyword(s):  
Minimally Invasive ◽  
Hallux Valgus ◽  
Morphological Changes ◽  
Case Series ◽  
Metatarsal Bone ◽  
Ct Scans ◽  
Metatarsal Osteotomy ◽  
Level Of Evidence ◽  
3 Dimensional ◽  
First Metatarsal

Background: Modified Bösch osteotomy (distal linear metatarsal osteotomy [DLMO]) is one of the minimally invasive correctional surgeries for hallux valgus. The 3-dimensional correctional angles and distances of the first metatarsal bone in DLMO have not been clarified. The purpose of this study was to analyze the 3-dimensional postoperative morphological changes of the first metatarsal bone in DLMO. Methods: Twenty patients (30 feet) who underwent DLMO were enrolled. Preoperative plain radiographs and computed tomography (CT) scans of the feet were examined. Postoperative radiographs and CT scans were also obtained after bone union. The surface data of the pre- and postoperative first metatarsals were reconstructed from the CT data. The positions of the distal ends of the first metatarsals described with respect to the proximal ends were calculated using CT surface-matching technique. Results: The distal end of the first metatarsal after DLMO was significantly supinated (10.2 ± 6.0 degrees, P < .001), adducted (6.0 ± 11.8 degrees, P = .004), dorsiflexed (11.1 ± 10.9, P < .001), shortened (7.4 ± 2.5 mm, P < .001), elevated (2.3 ± 3.1 mm, P = .001), and laterally shifted (8.2 ± 3.0 mm, P < .001) compared to the preoperative metatarsal distal end. Supination correction demonstrated a significant correlation with adduction correction ( r = 0.659, P < .001) on correlation analyses between these parameters. Conclusion: The 3-dimensional corrections of the first metatarsal bone after DLMO were evaluated. Pronation and abduction were successfully corrected. Furthermore, adduction correction might be an important factor affecting correction of pronation. Level of Evidence: Level IV, retrospective case series.

The Mayday Distal First Metatarsal Osteotomy for Hallux Valgus: A Review After the Introduction of a New Instrument

1997 ◽  
Vol 18 (1) ◽  
pp. 3-7 ◽  
Author(s):  
G.D. Terzis ◽  
F. Kashif ◽  
M.A.S. Mowbray
Keyword(s):  
Hallux Valgus ◽  
Metatarsophalangeal Joint ◽  
Metatarsal Osteotomy ◽  
Distal Fragment ◽  
Short Term ◽  
First Metatarsophalangeal Joint ◽  
First Metatarsal ◽  
Satisfactory Outcome ◽  
New Instrument

We present the short-term follow-up of 55 symptomatic hallux valgus deformities in 38 patients, treated operatively with a modification of the spike distal first metatarsal osteotomy, as described by Gibson and Piggott in 1962. The age range of the patients was 17 to 72 years at the time of surgery. The postoperative follow-up period was 12 to 55 months. Excellent and good clinical and radiographic results were recorded in 96.2% of our patients. Two of the patients (3.8%) were dissatisfied; one of them complained of metatarsalgia after the procedure, and the other had stiffness of the metatarsophalangeal joint and metatarsalgia that had been present before surgery. Three others (5.45%) required revision after early postoperative displacement but were asymptomatic subsequently. We concluded that our technique is an effective method of treating mild hallux valgus deformities with the advantages of simplicity, no shortening of the first metatarsal, and no risk of dorsal tilting of the distal fragment. Hallux valgus (lateral deviation of the great toe) is not a single disorder, as the name implies, but a complex deformity of the first ray that sometimes may involve the lesser toes. More than 130 procedures exist for the surgical correction of hallux valgus, which means that no treatment is unique. No single operation is effective for all bunions. 5 , 22 , 29 The objectives of surgical treatment are to reduce pain, to restore articular congruency, and to narrow the forefoot without impairing function, by transferring weight to the lesser metatarsals either by shortening or by dorsal tilting of the first metatarsal. 5 , 19 , 24 , 27 Patient selection is important for a satisfactory outcome after surgery of any kind, and our criteria were age, degree of deformity, presence of arthrosis, and subluxation of the first metatarsophalangeal joint. 1 , 5 , 13 , 19 – 21 , 24 , 29 In this study, we present a new method of treating hallux valgus that has been used at Mayday University Hospital since 1990. The technique was first described at the British Orthopaedic Foot Surgery Society, Liverpool, November 1990, 7 and we now present the short-term follow-up results. The procedure is essentially a modification of the spike osteotomy of the neck of the first metatarsal, as described by Gibson and Piggott. 9 It has the advantages of simplicity, no shortening of the first metatarsal, and no risk of dorsal displacement of the distal fragment.

Juvenile Hallux Valgus: Etiology and Treatment

1995 ◽  
Vol 16 (11) ◽  
pp. 682-697 ◽  
Author(s):  
Michael J. Coughlin
Keyword(s):  
Hallux Valgus ◽  
Normal Population ◽  
Surgical Correction ◽  
Metatarsal Osteotomy ◽  
Hallux Valgus Angle ◽  
Pes Planus ◽  
First Metatarsal ◽  
Chevron Osteotomy ◽  
Valgus Angle ◽  
Metatarsus Adductus

In an 11-year retrospective study of 45 patients (60 feet) with juvenile hallux valgus, a multiprocedural approach was used to surgically correct the deformity. A Chevron osteotomy or McBride procedure was used for mild deformities, a distal soft tissue procedure with proximal first metatarsal osteotomy was used for moderate and severe deformities with MTP subluxation, and a double osteotomy (extra-articular correction) was used for moderate and severe deformities with an increased distal metatarsal articular angle (DMAA). The average hallux valgus correction was 17.2° and the average correction of the 1–2 intermetatarsal angle was 5.3°. Good and excellent results were obtained in 92% of cases using a multiprocedural approach. Eighty-eight percent of patients were female and 40% of deformities occurred at age 10 or younger. Early onset was characterized by increased deformity and an increased DMAA. Maternal transmission was noted in 72% of patients. An increased distal metatarsal articular angle was noted in 48% of cases. With subluxation of the first MTP joint, the average DMAA was 7.9°. With a congruent joint, the average DMAA was 15.3°. In patients where hallux valgus occurred at age 10 or younger, the DMAA was increased. First metatarsal length was compared with second metatarsal length. While the incidence of a long first metatarsal was similar to that in the normal population (30%), the DMAA was 15.8° for a long first metatarsal and 6.0° for a short first metatarsal. An increased DMAA may be the defining characteristic of juvenile hallux valgus. The success of surgical correction of a juvenile hallux valgus deformity is intimately associated with the magnitude of the DMAA. Moderate and severe pes planus occurred in 17% of cases, which was no different than the incidence in the normal population. No recurrences occurred in the presence of pes planus. Pes planus was not thought to have an affect on occurrence or recurrence of deformity. Moderate and severe metatarsus adductus was noted in 22% of cases, a rate much higher than that in the normal population. The presence of metatarsus adductus did not affect the preoperative hallux valgus angle or the average surgical correction of the hallux valgus angle. Constricting footwear was noted by only 24% of patients as playing a role in the development of juvenile hallux valgus. There were six recurrences of the deformities and eight complications (six cases of postoperative hallux varus, one case of wire breakage, and one case of undercorrection).

Pes Planus Deformity and Its Association With Hallux Valgus Recurrence Following Scarf Osteotomy

2020 ◽  
Vol 41 (10) ◽  
pp. 1212-1218
Author(s):  
Gavin John Heyes ◽  
Amir R. Vosoughi ◽  
Lizzy Weigelt ◽  
Lyndon Mason ◽  
Andrew Molloy
Keyword(s):  
Hallux Valgus ◽  
P Value ◽  
Level Of Evidence ◽  
Pes Planus ◽  
First Metatarsal ◽  
Scarf Osteotomy ◽  
Metatarsal Angle ◽  
Valgus Angle ◽  
Akin Osteotomy

Background: Hallux valgus recurrence is an unsatisfactory complication, with many causes postulated. This study investigated the effect of pes planus on recurrence after scarf osteotomy. Methods: A total of 183 feet were retrospectively reviewed. All patients were treated with a scarf osteotomy and if required Akin osteotomy. We measured preoperative lateral talus first metatarsal angle (T1MA) to study pes planus; an angle of under −4 degrees was considered pes planus. We measured pre and postoperative hallux valgus angle (HVA), intermetatarsal angle (IMA), and sesamoid location. In total 164 feet were suitable for inclusion, with follow-up of at least 6 months (10 males and 154 females, mean age: 52 years). Results: Recurrence frequency (HVA greater than 15 degrees) was 27 feet (16%). Hallux valgus recurrence was not influenced by gender ( P value = .66) or preoperative IMA ( P value = .48). Preoperative HVA greater than 35 degrees was associated with increased frequency of recurrence ( P value = .004). Those with T1MA less than −10 degrees demonstrated progression in HVA and deterioration in sesamoid location up to 6 months postoperatively ( P value = .038). HVA did not progress beyond 6 months. The prevalence of recurrent hallux valgus with normal T1MA was 1%, in T1MA −4 to −10 degrees it was 29% and in T1MA less than −10 degrees it was 47% ( P value <.001). Breaks in T1MA less than −4 degrees were found at the naviculocuneiform joint in 68% of feet in this series. Conclusion: The prevalence of hallux valgus recurrence correlated with the severity of pes planus. Level of Evidence: Level III, retrospective cohort study.

Sign in / Sign up

Export Citation Format

Share Document