Electrochemical studies of the Pb2+/Pb(Hg) system in aqueous and aqueous ethylene glycol solutions

1979 ◽  
Vol 57 (14) ◽  
pp. 1801-1803 ◽  
Author(s):  
Tibor Rabockai

The electrochemical behavior of the Pb2+/Pb(Hg) system in aqueous and aqueous ethylene glycol solutions is studied in the temperature range of 20.0 to 50.0 °C by means of current reversal chronopotentiometry. It is shown that the reduction of Pb2+ ion is reversible and that kinetic or catalytic complications are not present. The value of dE1/2/dT is −0.6 mV/deg in the aqueous solution and −0.5 mV/deg in the solution with 56% (w/w) or higher concentrations of the organic solvent. In the above concentration range of ethylene glycol the activation energies of diffusion and viscosity vary from 4.3 × 103 to 7.2 × 103 cal mol−1 and from 3.7 × 103 to 6.7 × 103 cal mol−1, respectively. For all solutions the solvodynamic mean radius of the diffusing species remains constant within the experimental error, suggesting that the diffusing species is always the hydrated Pb2+ ion.


1981 ◽  
Vol 14 (19) ◽  
pp. 1551-1563
Author(s):  
Tibor Rabockai ◽  
Dora Soria ◽  
Reinaldo S. Goncalves


2015 ◽  
Vol 35 (7) ◽  
pp. 647-655 ◽  
Author(s):  
Hongyu Meng ◽  
Xin Zhang ◽  
Qiuchi Chen ◽  
Jun Wei ◽  
Yang Wang ◽  
...  

Abstract Poly(aspartic acid) (PASP) hydrogel is a biodegradable and biocompatible polymer with high water absorbing ability. Traditionally, the production of PASP hydrogel consumes large amounts of organic solvents, i.e., dimethylformamide (DMF) or dimethyl sulfoxide (DMSO). This traditional approach is now considered costly, complex and environmentally unfriendly due to required used solvent disposal. The present research explores two novel methods in preparing PASP hydrogel without organic solvent, by using hydrazine hydrate and ethylene glycol diglycidyl ether (EGDGE) or poly(ethylene glycol) diglycidyl ether (PEGDGE) as the cross-linkers. Absorbent ability and other characteristics are determined. Preparing PASP hydrogel in aqueous solution is promising and finds its use in many applications.





2015 ◽  
Vol 1718 ◽  
pp. 97-102 ◽  
Author(s):  
Toralf Roch ◽  
Konstanze K. Julich-Gruner ◽  
Axel T. Neffe ◽  
Nan Ma ◽  
Andreas Lendlein

ABSTRACTPolymer-based therapeutic strategies require biomaterials with properties and functions tailored to the demands of specific applications leading to an increasing number of newly designed polymers. For the evaluation of those new materials, comprehensive biocompatibility studies including cyto-, tissue-, and immunocompatibility are essential. Recently, it could be demonstrated that star-shaped amino oligo(ethylene glycol)s (sOEG) with a number average molecular weight of 5 kDa and functionalized with the phenol-derived moieties desaminotyrosine (DAT) or desaminotyrosyl tyrosine (DATT) behave in aqueous solution like surfactants without inducing a substantial cytotoxicity, which may qualify them as solubilizer for hydrophobic drugs in aqueous solution. However, for biomedical applications the polymer solutions need to be free of immunogenic contaminations, which could result from inadequate laboratory environment or contaminated starting material. Furthermore, the materials should not induce uncontrolled or undesired immunological effects arising from material intrinsic properties. Therefore, a comprehensive immunological evaluation as perquisite for application of each biomaterial batch is required. This study investigated the immunological properties of sOEG-DAT(T) solutions, which were prepared using sOEG with number average molecular weights of 5 kDa, 10 kDa, and 20 kDa allowing analyzing the influence of the sOEG chain lengths on innate immune mechanisms. A macrophage-based assay was used to first demonstrate that all DAT(T)-sOEG solutions are free of endotoxins and other microbial contaminations such as fungal products. In the next step, the capacity of the different DAT(T)-functionalized sOEG solutions to induce cytokine secretion and generation of reactive oxygen species (ROS) was investigated using whole human blood. It was observed that low levels of the pro-inflammatory cytokines interleukin(IL)-1β and IL-6 were detected for all sOEG solutions but only when used at concentrations above 250 µg·mL-1. Furthermore, only the 20 kDa sOEG-DAT induced low amounts of ROS-producing monocytes. Conclusively, the data indicate that the materials were not contaminated with microbial products and do not induce substantial immunological adverse effectsin vitro,which is a prerequisite for future biological applications.



Micromachines ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 53
Author(s):  
Nobuo Misawa ◽  
Satoshi Fujii ◽  
Koki Kamiya ◽  
Toshihisa Osaki ◽  
Shoji Takeuchi

This paper describes a method for a bilayer lipid membrane (BLM) formation using a perforated sheet along with an open chamber. Microscopic observation of the formed membrane showed a typical droplet interface bilayer. We proved that the formed membrane was a BLM based on electrical measurements of the membrane protein α-hemolysin, which produces nanopores in BLMs. Unlike the conventional approach for BLM formation based on the droplet contact method, this method provides aqueous surfaces with no organic solvent coating layer. Hence, this method is suitable for producing BLMs that facilitate the direct addition of chemicals into the aqueous phase.



2019 ◽  
Vol 731 ◽  
pp. 136603
Author(s):  
Jianzhong Shao ◽  
Xiaoyun Liu ◽  
Sergei V. Makarov ◽  
Kemei Pei


2016 ◽  
Vol 81 ◽  
pp. 129-138 ◽  
Author(s):  
Yu-Cai He ◽  
Feng Liu ◽  
Jun-Hua Di ◽  
Yun Ding ◽  
Zheng-Zhong Zhu ◽  
...  


1978 ◽  
Vol 56 (9) ◽  
pp. 1140-1141 ◽  
Author(s):  
P. Palffy-Muhoray ◽  
D. Balzarini

The index of refraction at 6328 Å has been measured for germane in the density range 0.15 to 0.9 g/cm3. The temperature and density ranges over which measurements are made are near the coexistence curve. The coefficient in the Lorenz–Lorentz expression, [Formula: see text], is constant to within 0.5% within experimental error for the temperature range and density range studied. The coefficient is slightly higher near the critical density. The critical density is measured to be 0.503 g/cm3. The critical temperature is measured to be 38.92 °C.



Sign in / Sign up

Export Citation Format

Share Document