EFFECT OF INITIAL STATE ON GRAIN REFINEMENT STRENGTHENING OF AZ31 MAGNESIUM ALLOY

2011 ◽  
Author(s):  
JIANMIN YU ◽  
ZHIMIN ZHANG
Keyword(s):  
Magnesium Alloy ◽  
Grain Refinement ◽  
Az31 Magnesium Alloy ◽  
Initial State ◽  
Grain Refinement Strengthening

The influence of gadolinium on Al–Ti–C master alloy and its refining effect on AZ31 magnesium alloy

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Wenxue Fan ◽  
Hai Hao
Keyword(s):  
Mechanical Properties ◽  
Magnesium Alloy ◽  
Grain Refinement ◽  
Magnesium Alloys ◽  
Master Alloy ◽  
Cast Alloy ◽  
Az31 Magnesium Alloy ◽  
Synthesis Mechanism ◽  
Refining Effect ◽  
Master Alloys

Abstract Grain refinement has a significant influence on the improvement of mechanical properties of magnesium alloys. In this study, a series of Al–Ti–C-xGd (x = 0, 1, 2, 3) master alloys as grain refiners were prepared by self-propagating high-temperature synthesis. The synthesis mechanism of the Al–Ti–C-xGd master alloy was analyzed. The effects of Al–Ti–C-xGd master alloys on the grain refinement and mechanical properties of AZ31 (Mg-3Al-1Zn-0.4Mn) magnesium alloys were investigated. The results show that the microstructure of the Al–Ti–C-xGd alloy contains α-Al, TiAl3, TiC and the core–shell structure TiAl3/Ti2Al20Gd. The refining effect of the prepared Al–Ti–C–Gd master alloy is obviously better than that of Al–Ti–C master alloy. The grain size of AZ31 magnesium alloy was reduced from 323 μm to 72 μm when adding 1 wt.% Al–Ti–C-2Gd master alloy. In the same condition, the ultimate tensile strength and elongation of as-cast alloy were increased from 130 MPa, 7.9% to 207 MPa, 16.6% respectively.

Effects of solutionized Al–10Sr master alloys on grain refinement of AZ31 magnesium alloy

2008 ◽  
Vol 461 (1-2) ◽  
pp. 298-303 ◽  
Author(s):  
Mingbo Yang ◽  
Fusheng Pan ◽  
Renju Cheng ◽  
Aitao Tang
Keyword(s):  
Magnesium Alloy ◽  
Grain Refinement ◽  
Az31 Magnesium Alloy ◽  
Master Alloys

scholarly journals STRUCTURE AND PROPERTIES OF AZ31 MAGNESIUM ALLOY AFTER COMBINATION OF HOT EXTRUSION AND ECAP

2017 ◽  
Vol 23 (3) ◽  
pp. 222 ◽  
Author(s):  
Ondřej Hilšer ◽  
Stanislav Rusz ◽  
Wojciech Maziarz ◽  
Jan Dutkiewicz ◽  
Tomasz Tański ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Magnesium Alloy ◽  
Hot Extrusion ◽  
Az31 Magnesium Alloy ◽  
Initial State ◽  
Fine Grained ◽  
Angular Pressing ◽  
Ecap Process ◽  
Average Grain Size ◽  
Fine Grained Structure

<p>Equal channel angular pressing (ECAP) method was used for achieving very fine-grained structure and increased mechanical properties of AZ31 magnesium alloy. The experiments were focused on the, in the initial state, hot extruded alloy. ECAP process was realized at the temperature 250°C and following route Bc. It was found that combination of hot extrusion and ECAP leads to producing of material with significantly fine-grained structure and improves mechanical properties. Alloy structure after the fourth pass of ECAP tool with helix matrix 30° shows a fine-grained structure with average grain size of 2 µm to 3 µm and high disorientation between the grains. More experimental results are discussed in this article.</p>

Effect of Al2Ca intermetallic compound addition on grain refinement of AZ31 magnesium alloy

2016 ◽  
Vol 26 (5) ◽  
pp. 1284-1293 ◽  
Author(s):  
Zhong-tao JIANG ◽  
Bin JIANG ◽  
Jian-yue ZHANG ◽  
Jia-hong DAI ◽  
Qing-shan YANG ◽  
...  
Keyword(s):  
Magnesium Alloy ◽  
Intermetallic Compound ◽  
Grain Refinement ◽  
Az31 Magnesium Alloy

302 Plastic formability of an AZ31 magnesium alloy subjected to a grain refinement

2005 ◽  
Vol 2005 (0) ◽  
pp. 45-46
Author(s):  
Yusuke OTA ◽  
Takuya HANADA ◽  
Goroh ITOH ◽  
Yoshinobu MOTOHASHI
Keyword(s):  
Magnesium Alloy ◽  
Grain Refinement ◽  
Az31 Magnesium Alloy

Influence of number of ECAP passes on microstructure and mechanical properties of AZ31 magnesium alloy

2012 ◽  
Vol 57 (3) ◽  
pp. 711-717 ◽  
Author(s):  
K. Bryła ◽  
J. Dutkiewicz ◽  
L. Litynska-Dobrzynska ◽  
L.L. Rokhlin ◽  
P. Kurtyka
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Magnesium Alloy ◽  
Grain Refinement ◽  
Vickers Microhardness ◽  
Az31 Alloy ◽  
Az31 Magnesium Alloy ◽  
Angular Pressing ◽  
Microstructure And Mechanical Properties ◽  
Transmission Electron

The aim of this work was to investigate the influence of the number of equal channel angular pressing (ECAP) passes on the microstructure and mechanical properties of AZ31 magnesium alloy. The microstructure after two and four passes of ECAP at 423 and 523 K was investigated by means of optical and transmission electron microscopy. The mechanical properties were carried out using Vickers microhardness measurements and compression test. The grain refinement in AZ31 alloy was obtained using ECAP routes down to 1,5 μm at 423 K. Processes of dynamic recrystallization during ECAP were observed. It was found that a gradual decrease of grain size occurs with the increasing of number of ECAP passes. The grain refinement increases mechanical properties at ambient temperature, such as Vickers microhardness and compression strength proportionally to d-0.5.

Sign in / Sign up

Export Citation Format

Share Document