A New Methodology for Circuit Analysis with Reverse Analysis Capability

2017 ◽  
Vol 26 (06) ◽  
pp. 1750101
Author(s):  
Mohammad Rahimi ◽  
Behrad Soleymani ◽  
Farrokh Aminifar ◽  
Amin Gholami
Keyword(s):  
Linear Time ◽  
Electric Circuit ◽  
Circuit Analysis ◽  
Passive Element ◽  
Electric Circuits ◽  
Linear Time Invariant ◽  
Basic Circuit ◽  
Reverse Analysis ◽  
Circuit Elements ◽  
Time Invariant

This paper presents a novel technique for the analysis of looped linear time-invariant electric circuits. This approach works in both time and Laplace domains; any type of elements could hence be incorporated. The circuit elements are partitioned into twofold classes of basic circuit and subsidiaries. The basic circuit is a spanning tree of the network, and the subsidiaries include circuit elements hypothetically removed from the looped electric circuit to open the loops. The subsidiaries include a suit of passive elements which might not even make any interconnected circuit. The circuit governing equations of flow and energy conservation are manipulated so that branch currents in the subsidiaries and branch voltages in the basic circuit are considered as independent variables to calculate passive element properties (impedance of all passive elements) directly. In contrast to existing methods, this technique is tailored for the circuit analysis in a reverse manner. As a complement for conventional circuit analysis techniques, this method can be taught in the undergraduate program to offer the students an alternative tool for the circuit analysis.

FUZZY CENTRE BASED SOLUTION OF FUZZY COMPLEX LINEAR SYSTEM OF EQUATIONS

2013 ◽  
Vol 21 (04) ◽  
pp. 629-642 ◽  
Author(s):  
DIPTIRANJAN BEHERA ◽  
S. CHAKRAVERTY
Keyword(s):  
Linear Time ◽  
Linear Equations ◽  
Electric Circuit ◽  
System Of Linear Equations ◽  
New Approach ◽  
Linear System Of Equations ◽  
Linear Time Invariant ◽  
Complex Linear ◽  
Time Invariant ◽  
Good Agreement

A new approach to solve Fuzzy Complex System of Linear Equations (FCSLE) based on fuzzy complex centre procedure is presented here. Few theorems related to the investigation are stated and proved. Finally the presented procedure is used to analyze an example problem of linear time invariant electric circuit with complex crisp coefficient and fuzzy complex sources. The results obtained are also compared with the known solutions and are found to be in good agreement.

Evaluation of fractional order of the discrete integrator. Part II

2020 ◽  
Vol 23 (2) ◽  
pp. 408-426
Author(s):  
Piotr Ostalczyk ◽  
Marcin Bąkała ◽  
Jacek Nowakowski ◽  
Dominik Sankowski
Keyword(s):  
Fractional Order ◽  
Output Signal ◽  
Linear Time ◽  
Mathematical Problem ◽  
Simple Method ◽  
Linear Time Invariant ◽  
Input And Output ◽  
Order Difference Equation ◽  
Time Invariant ◽  
Discrete Integrator

AbstractThis is a continuation (Part II) of our previous paper [19]. In this paper we present a simple method of the fractional-order value calculation of the fractional-order discrete integration element. We assume that the input and output signals are known. The linear time-invariant fractional-order difference equation is reduced to the polynomial in a variable ν with coefficients depending on the measured input and output signal values. One should solve linear algebraic equation or find roots of a polynomial. This simple mathematical problem complicates when the measured output signal contains a noise. Then, the polynomial roots are unsettled because they are very sensitive to coefficients variability. In the paper we show that the discrete integrator fractional-order is very stiff due to the degree of the polynomial. The minimal number of samples guaranteeing the correct order is evaluated. The investigations are supported by a numerical example.

Design and implementation of decoupled periodic control scheme for a laboratory-based quadruple-tank process

2021 ◽  
pp. 095965182110228
Author(s):  
Jatin K Pradhan ◽  
Arun Ghosh
Keyword(s):  
Real Time ◽  
High Frequency ◽  
Linear Time ◽  
Disturbance Attenuation ◽  
Minimum Phase ◽  
Periodic Control ◽  
Linear Time Invariant ◽  
Control Scheme ◽  
Gain Margin ◽  
Time Invariant

It is well known that linear time-invariant controllers fail to provide desired robustness margins (e.g. gain margin, phase margin) for plants with non-minimum phase zeros. Attempts have been made in literature to alleviate this problem using high-frequency periodic controllers. But because of high frequency in nature, real-time implementation of these controllers is very challenging. In fact, no practical applications of such controllers for multivariable plants have been reported in literature till date. This article considers a laboratory-based, two-input–two-output, quadruple-tank process with a non-minimum phase zero for real-time implementation of the above periodic controller. To design the controller, first, a minimal pre-compensator is used to decouple the plant in open loop. Then the resulting single-input–single-output units are compensated using periodic controllers. It is shown through simulations and real-time experiments that owing to arbitrary loop-zero placement capability of periodic controllers, the above decoupled periodic control scheme provides much improved robustness against multi-channel output gain variations as compared to its linear time-invariant counterpart. It is also shown that in spite of this improved robustness, the nominal performances such as tracking and disturbance attenuation remain almost the same. A comparison with [Formula: see text]-linear time-invariant controllers is also carried out to show superiority of the proposed scheme.

scholarly journals Differential-algebraic systems are generically controllable and stabilizable

2021 ◽  
Author(s):  
Achim Ilchmann ◽  
Jonas Kirchhoff
Keyword(s):  
Algebraic Geometry ◽  
Linear Time ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Algebraic Systems ◽  
Linear Time Invariant ◽  
Survey Article ◽  
Link Type ◽  
Invariant Differential ◽  
Time Invariant

AbstractWe investigate genericity of various controllability and stabilizability concepts of linear, time-invariant differential-algebraic systems. Based on well-known algebraic characterizations of these concepts (see the survey article by Berger and Reis (in: Ilchmann A, Reis T (eds) Surveys in differential-algebraic equations I, Differential-Algebraic Equations Forum, Springer, Berlin, pp 1–61. 10.1007/978-3-642-34928-7_1)), we use tools from algebraic geometry to characterize genericity of controllability and stabilizability in terms of matrix formats.

scholarly journals Steady State Response of Linear Time Invariant Systems Modeledby Multibond Graphs

2021 ◽  
Vol 11 (4) ◽  
pp. 1717
Author(s):  
Gilberto Gonzalez Avalos ◽  
Noe Barrera Gallegos ◽  
Gerardo Ayala-Jaimes ◽  
Aaron Padilla Garcia
Keyword(s):  
Steady State ◽  
Linear Time ◽  
Direct Determination ◽  
The State ◽  
Steady State Response ◽  
State Variables ◽  
Linear Time Invariant ◽  
State Response ◽  
Time Invariant

The direct determination of the steady state response for linear time invariant (LTI) systems modeled by multibond graphs is presented. Firstly, a multiport junction structure of a multibond graph in an integral causality assignment (MBGI) to get the state space of the system is introduced. By assigning a derivative causality to the multiport storage elements, the multibond graph in a derivative causality (MBGD) is proposed. Based on this MBGD, a theorem to obtain the steady state response is presented. Two case studies to get the steady state of the state variables are applied. Both cases are modeled by multibond graphs, and the symbolic determination of the steady state is obtained. The simulation results using the 20-SIM software are numerically verified.

Sign in / Sign up

Export Citation Format

Share Document