NONLINEAR GENERALIZED BEAM THEORY FOR COLD-FORMED STEEL MEMBERS

2003 ◽  
Vol 03 (04) ◽  
pp. 461-490 ◽  
Author(s):  
N. SILVESTRE ◽  
D. CAMOTIM
Keyword(s):  
Numerical Technique ◽  
Beam Theory ◽  
Equilibrium Equations ◽  
Steel Members ◽  
Mode Decomposition ◽  
Nonlinear Equilibrium ◽  
Geometrical Imperfections ◽  
Post Buckling ◽  
Cold Formed Steel ◽  
Generalized Beam Theory

A geometrically nonlinear Generalized Beam Theory (GBT) is formulated and its application leads to a system of equilibrium equations which are valid in the large deformation range but still retain and take advantage of the unique GBT mode decomposition feature. The proposed GBT formulation, for the elastic post-buckling analysis of isotropic thin-walled members, is able to handle various types of loading and arbitrary initial geometrical imperfections and, in particular, it can be used to perform "exact" or "approximate" (i.e., including only a few deformation modes) analyses. Concerning the solution of the system of GBT nonlinear equilibrium equations, the finite element method (FEM) constitutes the most efficient and versatile numerical technique and, thus, a beam FE is specifically developed for this purpose. The FEM implementation of the GBT post-buckling formulation is reported in some detail and then employed to obtain numerical results, which validate and illustrate the application and capabilities of the theory.

scholarly journals Geometrically and Physically Non-Linear GBT-Based Analysis of Thin-Walled Steel Members

2020 ◽  
Author(s):  
Abambres M ◽  
Camotim D ◽  
Silvestre N
Keyword(s):  
Beam Theory ◽  
Arbitrary Cross Section ◽  
Deformation Pattern ◽  
Equilibrium Equations ◽  
Steel Members ◽  
Non Linear ◽  
Geometrical Imperfections ◽  
Post Buckling ◽  
Thin Walled ◽  
Generalised Beam Theory

<p>This paper presents and illustrates the application of an elastic-plastic Generalised Beam Theory (GBT) formulation, based on J<sub>2</sub>-flow plasticity theory, that makes it possible to perform physically and geometrically non-linear (post-buckling) analyses of prismatic thin-walled members (i) with arbitrary cross-section shapes, (ii) exhibiting any type of deformation pattern (global, local, distortional, warping, shear), (iii) made from non-linear materials with isotropic strain-hardening and (iv) containing initial imperfections, namely residual stresses and/or geometric imperfections, having generic distributions. After providing a brief overview of the main GBT assumptions, kinematical relations and equilibrium equations, the development of a novel non-linear beam finite element (FE) is addressed in some detail. Moreover, its application is illustrated through the presentation and discussion of numerical results concerning the post-buckling behaviour of a fixed-ended I-section steel column exhibiting local initial geometrical imperfections, namely (i) non-linear equilibrium paths, (ii) displacement profiles, (iii) stress diagrams/distributions and (iv) deformed configurations. For validation purposes, the GBT results are also compared with values yielded by Abaqus rigorous shell FE analyses.</p>

scholarly journals Geometrically and Physically Non-Linear GBT-Based Analysis of Thin-Walled Steel Members

2019 ◽  
Author(s):  
Miguel Abambres ◽  
Dinar Camotim ◽  
Nuno Silvestre
Keyword(s):  
Beam Theory ◽  
Arbitrary Cross Section ◽  
Deformation Pattern ◽  
Equilibrium Equations ◽  
Steel Members ◽  
Non Linear ◽  
Geometrical Imperfections ◽  
Post Buckling ◽  
Thin Walled ◽  
Generalised Beam Theory

This paper presents and illustrates the application of an elastic-plastic Generalised Beam Theory (GBT) formulation, based on J2-flow plasticity theory, that makes it possible to perform physically and geometrically non-linear (post-buckling) analyses of prismatic thin-walled members (i) with arbitrary cross-section shapes, (ii) exhibiting any type of deformation pattern (global, local, distortional, warping, shear), (iii) made from non-linear materials with isotropic strain-hardening and (iv) containing initial imperfections, namely residual stresses and/or geometric imperfections, having generic distributions. After providing a brief overview of the main GBT assumptions, kinematical relations and equilibrium equations, the development of a novel non-linear beam finite element (FE) is addressed in some detail. Moreover, its application is illustrated through the presentation and discussion of numerical results concerning the post-buckling behaviour of a fixed-ended I-section steel column exhibiting local initial geometrical imperfections, namely (i) non-linear equilibrium paths, (ii) displacement profiles, (iii) stress diagrams/distributions and (iv) deformed configurations. For validation purposes, the GBT results are also compared with values yielded by ABAQUS rigorous shell FE analyses.

scholarly journals Geometrically and Physically Non-Linear GBT-Based Analysis of Thin-Walled Steel Members

2020 ◽  
Author(s):  
Abambres M ◽  
Camotim D ◽  
Silvestre N
Keyword(s):  
Beam Theory ◽  
Arbitrary Cross Section ◽  
Deformation Pattern ◽  
Equilibrium Equations ◽  
Steel Members ◽  
Non Linear ◽  
Geometrical Imperfections ◽  
Post Buckling ◽  
Thin Walled ◽  
Generalised Beam Theory

<p>This paper presents and illustrates the application of an elastic-plastic Generalised Beam Theory (GBT) formulation, based on J<sub>2</sub>-flow plasticity theory, that makes it possible to perform physically and geometrically non-linear (post-buckling) analyses of prismatic thin-walled members (i) with arbitrary cross-section shapes, (ii) exhibiting any type of deformation pattern (global, local, distortional, warping, shear), (iii) made from non-linear materials with isotropic strain-hardening and (iv) containing initial imperfections, namely residual stresses and/or geometric imperfections, having generic distributions. After providing a brief overview of the main GBT assumptions, kinematical relations and equilibrium equations, the development of a novel non-linear beam finite element (FE) is addressed in some detail. Moreover, its application is illustrated through the presentation and discussion of numerical results concerning the post-buckling behaviour of a fixed-ended I-section steel column exhibiting local initial geometrical imperfections, namely (i) non-linear equilibrium paths, (ii) displacement profiles, (iii) stress diagrams/distributions and (iv) deformed configurations. For validation purposes, the GBT results are also compared with values yielded by Abaqus rigorous shell FE analyses.</p>

LOCAL/DISTORTIONAL/GLOBAL MODE INTERACTION IN SIMPLY SUPPORTED COLD-FORMED STEEL LIPPED CHANNEL COLUMNS

2011 ◽  
Vol 11 (05) ◽  
pp. 877-902 ◽  
Author(s):  
P. B. DINIS ◽  
D. CAMOTIM
Keyword(s):  
Shell Element ◽  
Mode Interaction ◽  
Buckling Mode ◽  
Global Mode ◽  
Simply Supported ◽  
Elastic Plastic ◽  
Buckling Behavior ◽  
Geometrical Imperfections ◽  
Post Buckling ◽  
Cold Formed Steel

This paper reports the results of a numerical investigation concerning the elastic and elastic-plastic post-buckling behavior of cold-formed steel-lipped channel columns affected by local/distortional/global (flexural-torsional) buckling mode interaction. The results presented and discussed are obtained by means of analyses performed in the code ABAQUS and adopting column discretizations into fine four-node isoparametric shell element meshes. The columns analysed (i) are simply supported (locally/globally pinned end sections with free warping), (ii) have cross-section dimensions and lengths ensuring equal local, distortional, and global (flexural-torsional) critical buckling loads, thus maximizing the mode interaction phenomenon under scrutiny, and (iii) contain critical-mode initial geometrical imperfections exhibiting different configurations, all corresponding to linear combination of the three "competing" critical buckling modes. After briefly addressing the lipped channel column "pure" global post-buckling behavior, one presents and discusses in detail numerical results concerning the post-buckling behavior of similar columns experiencing strong local/distortional/global mode interaction effects. These results consist of (i) elastic (mostly) and elastic-plastic equilibrium paths, (ii) curves and figures providing the evolution of the deformed configurations of several columns (expressed as linear combinations of their local, distortional, and global components) and, for the elastic-plastic columns, (iii) figures enabling a clear visualization of (iii1) the location and growth of the plastic strains, and (iii2) the characteristics of the failure mechanisms more often detected in this work.

Effects of symmetric imperfections on the behavior of bistable struts

2016 ◽  
Vol 22 (12) ◽  
pp. 2240-2252 ◽  
Author(s):  
Jianguo Cai ◽  
Xiaowei Deng ◽  
Jian Feng
Keyword(s):  
Virtual Work ◽  
Variable Geometry ◽  
Equilibrium Equations ◽  
Buckling Mode ◽  
Concentrated Load ◽  
Virtual Work Principle ◽  
Shallow Arches ◽  
Buckling Behavior ◽  
Nonlinear Equilibrium ◽  
Post Buckling

The behavior of a bistable strut for variable geometry structures was investigated in this paper. A three-hinged arch subjected to a central concentrated load was used to study the effect of symmetric imperfections on the behavior of the bistable strut. Based on a nonlinear strain–displacement relationship, the virtual work principle was adopted to establish both the pre-buckling and buckling nonlinear equilibrium equations for the symmetric snap-through buckling mode. Then the critical load for symmetric snap-through buckling was obtained. The results show that the axial force is in compression before the arch is buckled, but it becomes in tension after buckling. Thus, the previous formulas cannot be used for the analysis of post-buckling behavior of three-hinged shallow arches. Then, the principle of virtual work was also used to establish the post-buckling equilibrium equations of the arch in the horizontal and vertical directions as well as the static boundary conditions, which are very important for bistable struts.

Buckling and Vibration Analysis of Cold-Formed Steel CHS Members and Frames Using Generalized Beam Theory

2015 ◽  
Vol 15 (08) ◽  
pp. 1540021 ◽  
Author(s):  
Cilmar Basaglia ◽  
Dinar Camotim ◽  
Nuno Silvestre
Keyword(s):  
Finite Element ◽  
Beam Theory ◽  
Element Formulation ◽  
Hollow Section ◽  
Mass Matrices ◽  
Cold Formed Steel ◽  
Shell Finite Element ◽  
Circular Hollow Section ◽  
Generalized Beam Theory

This paper reports the results of an investigation on the use of Generalized Beam Theory (GBT) to assess the buckling and vibration behaviors of thin-walled members and frames built from cold-formed steel circular hollow section (CHS) profiles. Initially, the concepts and procedures involved in performing GBT buckling and vibration analyses are presented, paying particular attention to the derivation of the mass tensors that account for the influence of the inertia forces. Then, the formulation, numerical implementation and validation of a GBT-based beam finite element for isolated members are described. Next, the determination of the frame linear stiffness, geometric stiffness and mass matrices, which incorporate the influence of the frame joints, is addressed. Finally, in order to illustrate the application and capabilities of the proposed GBT finite element formulation, numerical results are presented and discussed — they concern the buckling and vibration behaviors of an "L-shaped" frame. For validation purposes, most GBT-based results are compared with values yielded by shell finite element analyses carried out in the code ANSYS.

Post-buckling inelastic analysis of thin-walled metal members using the Generalised Beam Theory

2019 ◽  
Author(s):  
Miguel Abambres ◽  
Dinar Camotim ◽  
Miguel Abambres
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Beam Theory ◽  
Flow Theory ◽  
Promising Alternative ◽  
Inelastic Analysis ◽  
Post Buckling ◽  
Thin Walled ◽  
Shell Finite Element ◽  
Generalised Beam Theory

A 2nd order inelastic Generalised Beam Theory (GBT) formulation based on the J2 flow theory is proposed, being a promising alternative to the shell finite element method. Its application is illustrated for an I-section beam and a lipped-C column. GBT results were validated against ABAQUS, namely concerning equilibrium paths, deformed configurations, and displacement profiles. It was concluded that the GBT modal nature allows (i) precise results with only 22% of the number of dof required in ABAQUS, as well as (ii) the understanding (by means of modal participation diagrams) of the behavioral mechanics in any elastoplastic stage of member deformation .

First and Second Order Elastoplastic Analyses of Thin-Walled Metal Members using Generalized Beam Theory

2018 ◽  
Author(s):  
Miguel Abambres
Keyword(s):  
Finite Element ◽  
Stainless Steel ◽  
Cross Section ◽  
Beam Theory ◽  
Second Order ◽  
Flow Rule ◽  
Non Linear ◽  
Thin Walled ◽  
Shell Finite Element ◽  
Generalized Beam Theory

Original Generalized Beam Theory (GBT) formulations for elastoplastic first and second order (postbuckling) analyses of thin-walled members are proposed, based on the J2 theory with associated flow rule, and valid for (i) arbitrary residual stress and geometric imperfection distributions, (ii) non-linear isotropic materials (e.g., carbon/stainless steel), and (iii) arbitrary deformation patterns (e.g., global, local, distortional, shear). The cross-section analysis is based on the formulation by Silva (2013), but adopts five types of nodal degrees of freedom (d.o.f.) – one of them (warping rotation) is an innovation of present work and allows the use of cubic polynomials (instead of linear functions) to approximate the warping profiles in each sub-plate. The formulations are validated by presenting various illustrative examples involving beams and columns characterized by several cross-section types (open, closed, (un) branched), materials (bi-linear or non-linear – e.g., stainless steel) and boundary conditions. The GBT results (equilibrium paths, stress/displacement distributions and collapse mechanisms) are validated by comparison with those obtained from shell finite element analyses. It is observed that the results are globally very similar with only 9% and 21% (1st and 2nd order) of the d.o.f. numbers required by the shell finite element models. Moreover, the GBT unique modal nature is highlighted by means of modal participation diagrams and amplitude functions, as well as analyses based on different deformation mode sets, providing an in-depth insight on the member behavioural mechanics in both elastic and inelastic regimes.

Sign in / Sign up

Export Citation Format

Share Document