DEVELOPMENT AND WALKING CONTROL OF EMOTIONAL HUMANOID ROBOT, KIBO

2013 ◽  
Vol 10 (04) ◽  
pp. 1350024 ◽  
Author(s):  
SANGYONG LEE ◽  
JUNG-YUP KIM ◽  
MUNSANG KIM

This paper deals with the mechanical design, system integration, and dynamic walking algorithm of KIBO, an emotional biped humanoid robot that has a facial expression mechanism and various human-interactive devices. To emphasize the aesthetic features and marketability of KIBO, the mechanical design was performed after the exterior design stage to conform to all requirements, particularly constraints imposed by the external appearance and human-like link dimensions. For flexible biped walking, a walking pattern generator with variable walking parameters was developed. The walking pattern generator generates both a walking pattern and a corresponding reference zero-moment point (ZMP) pattern simultaneously. For stable biped walking, a walking control strategy using the ZMP and inertial sensor data was developed. In the strategy, we newly proposed a dual ZMP control approach and a posture control approach using an equivalent body inclination, which is calculated from the ZMP and inertial sensor data for robust walking on non-level ground. Finally, the hardware, software architecture, and dynamic walking performance of KIBO were verified through several walking experiments.

2008 ◽  
Vol 2008 (0) ◽  
pp. _1P1-B02_1-_1P1-B02_4
Author(s):  
Yuzuru HARADA ◽  
Kentaro MIYAHARA ◽  
Yoshikazu KANAMIYA ◽  
Daisuke SATO

2009 ◽  
Vol 21 (3) ◽  
pp. 311-316 ◽  
Author(s):  
Kensuke Harada ◽  
◽  
Mitsuharu Morisawa ◽  
Shin-ichiro Nakaoka ◽  
Kenji Kaneko ◽  
...  

For the purpose of realizing the humanoid robot walking on uneven terrain, this paper proposes the kinodynamic gait planning method where both kinematics and dynamics of the system are considered. We can simultaneously plan both the foot-place and the whole-body motion taking the dynamical balance of the robot into consideration. As a dynamic constraint, we consider the differential equation of the robot's CoG. To solve this constraint, we use a walking pattern generator. We randomly sample the configuration space to search for the path connecting the start and the goal configurations. To show the effectiveness of the proposed methods, we show simulation and experimental results where the humanoid robot HRP-2 walks on rocky cliff with hands contacting the environment.


Author(s):  
Shuuji Kajita ◽  
Mitsuharu Morisawa ◽  
Kensuke Harada ◽  
Kenji Kaneko ◽  
Fumio Kanehiro ◽  
...  

2012 ◽  
Vol 197 ◽  
pp. 415-422 ◽  
Author(s):  
Hong Liu ◽  
Qing Sun

It is a great challenge to plan motion for humanoid robots in complex environments especially when the terrain is cluttered and discrete. To address this problem, a novel method is proposed in this paper by planning the gait according to the stance sequence and ZMP (Zero Moment Point) reference. It consists of two components: an adaptive footstep planner and a walking pattern generator. The adaptive footstep planner can generate the stance path according to the walking rules and adjust the orientation of body relevantly. As the footstep locations are determined, Linear Inverted Pendulum Model (LIPM) is used to generate the walking pattern with a moving ZMP reference. As demonstrated in experiments on the humanoid robot HOAP-2, our method can successfully plan footstep trajectories as well as generate the stable and natural-looking gait in typical cluttered and discrete environments.


2009 ◽  
Vol 6 (3-4) ◽  
pp. 301-344 ◽  
Author(s):  
M. Arbulú ◽  
D. Kaynov ◽  
L. Cabas ◽  
C. Balaguer

This paper is an overview of the humanoid robot Rh-1, the second phase of the Rh project, which was launched by the Robotics Lab at the Carlos III University of Madrid in 2002. The robot mechanical design includes the specifications development in order to construct a platform, which is capable of stable biped walking. At first, the robots’ weights were calculated in order to obtain the inverse dynamics and to select the actuators. After that, mechanical specifications were introduced in order to verify the robot’s structural behaviour with different experimental gaits. In addition, an important aspect is the joints design when their axes are crossed, which is called ‘Joints of Rectangular Axes’ (JRA). The problem with these joints is obtaining two or more degrees of freedom (DOF) in small space. The construction of a humanoid robot also includes the design of hardware and software architectures. The main advantage of the proposed hardware and software architectures is the use of standardised solutions frequently used in the automation industry and commercially available hardware components. It provides scalability, modularity and application of standardised interfaces and brings the design of the complex control system of the humanoid robot out of a closed laboratory to industry. Stable walking is the most essential ability for the humanoid robot. The three dimensional Linear Inverted Pendulum Model (3D-LIPM) and the Cart-table models had been used in order to achieve natural and dynamic biped walking. Humanoid dynamics is widely simplified by concentrating its mass in the centre of gravity (COG) and moving it following the natural inverted pendulum laws (3D-LIPM) or by controlling the cart motion (Cart-table model). An offline-calculated motion pattern does not guarantee the walking stability of the humanoid robot. Control architecture for the dynamic humanoid robot walking was developed, which is able to make online modifications of the motion patterns in order to adjust it to the continuously changing environment. Experimental results concerning biped locomotion of the Rh-1 humanoid robot are presented and discussed.


Sign in / Sign up

Export Citation Format

Share Document