ELECTROCHEMICAL SYNTHESIS AND CHARACTERIZATION OF DIFFERENT MORPHOLOGIES NANORAMSDELLITE-MnO2

NANO ◽  
2012 ◽  
Vol 07 (04) ◽  
pp. 1250030
Author(s):  
MADJID TORKAMAN ◽  
AZIZAN AZIZ ◽  
MOHAMAD ABU BAKAR ◽  
SULAIMAN AB GHANI
Keyword(s):  
Electron Microscopy ◽  
Reaction Time ◽  
Average Particle Size ◽  
Reaction Times ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Crystal Particle

In this work manganese dioxide (Ramsdellite- MnO2 ) was synthesized at room temperature using a facile electrochemical method. X-ray diffraction (XRD) was used to identify the type and the size of the crystal particle, while field emission scanning electron microscopy (FESEM) and energy filtered transmission electron microscopy (EFTEM) were used to show and identify the morphology of the particles and changes of their morphologies with the increase of reaction times. Fourier transform infrared (FTIR) spectroscopy confirmed the Mn–O bond. Results from XRD showed that optimum time for synthesis Ramsdellite- MnO2 was 9 h. The results of EFTEM showed a mixture of nanospheres and nanorods after 9 h reaction time while a homogenous morphology of nanospheres was detected at 12 h reaction time. Results confirmed on the existence of a correlation between the reaction time and the resulting nanostructures. Moreover, the EFTEM result showed that average particle size for 12 h was (25 ± 7 nm). The variation of calculated specific capacitance (F/g) versus the different scan rate has indicated that the efficiency of synthesized Ramsdellite- MnO2 nanostructures in 12 h reaction time was superior to 9 h.

scholarly journals Synthesis and Characterization of Cu2FeSnSe4 Nanofilms

2021 ◽  
pp. 1873-1878
Author(s):  
Omar Abdulsada Ali ◽  
Sarmed S.M. Al-Awadi
Keyword(s):  
Electron Microscopy ◽  
Average Particle Size ◽  
Average Particle ◽  
Electrochemical Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Photovoltaic Applications ◽  
Tem Transmission Electron Microscopy

Well dispersed Cu2FeSnSe4 (CFTSe) nanofilms were synthesized by hot-injection method. The structural and morphological measurements were characterized using XRD (X-ray diffraction), Raman spectroscopy, SEM (scanning electron microscopy), and TEM (transmission electron microscopy). Chemical composition and optical properties of as-synthesized CFTSe nanoparticles were characterized using EDS (energy dispersive spectroscopy) and UV-Vis spectrophotometry. The average particle size of the nanoparticles was about 7-10 nm. The UV-Vis absorption spectra showed that the synthesized CFTS nanofilms have a band gap (Eg) of about 1.16 eV. Photo-electrochemical characteristics of CFTSe nanoparticles were studied and indicated their potential application in photovoltaic applications.

DIELECTRIC PROPERTIES OF ULTRAFINE Zn-DOPED CaCu3Ti4O12 CERAMIC

2012 ◽  
Vol 02 (01) ◽  
pp. 1250007 ◽  
Author(s):  
LAXMAN SINGH ◽  
U. S. RAI ◽  
K. D. MANDAL ◽  
MADHU YASHPAL
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Room Temperature ◽  
Single Phase ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sintered Powder

Ultrafine powder of CaCu2.80Zn0.20Ti4O12 ceramic was prepared using a novel semi-wet method. DTA/TG analysis of dry powder gives pre-information about formation of final product around 800°C. The formation of single phase was confirmed by X-ray diffraction analysis. The average particle size of sintered powder of the ceramic obtained from XRD and Transmission electron microscopy was found 59 nm and 102 nm, respectively. Energy Dispersive X-ray studies confirm the stoichiometry of the synthesized ceramic. Dielectric constant of the ceramic was found to be 2617 at room temperature at 1 kHz.

IMPACT OF SURFACTANTS ON PHYSICAL PROPERTIES OF BaTiO3 NANOPARTICLES

2013 ◽  
Vol 12 (01) ◽  
pp. 1350003 ◽  
Author(s):  
R. VIJAYALAKSHMI ◽  
V. RAJENDRAN
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Average Particle Size ◽  
Ammonium Bromide ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Nanocrystalline BaTiO3 particles of about 20–35 nm have been successfully synthesized by using cationic, anionic and nonionic surfactants such as cetyltrimethyl ammonium bromide (CTAB), sodium dodecyl sulphate (SDS) and poly ethylene glycol (PEG) via hydrothermal method. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-Vis absorption spectroscopy and photoluminescence (PL) spectroscopy. The average particle size, measured by powder X-ray diffraction was determined to be 20–35 nm and was confirmed by transmission electron microscopy. Spherical-like morphologies were obtained by scanning electron microscopy (SEM) analysis. Optical properties of products were investigated by ultraviolet-visible (UV-Vis) absorption and PL spectroscopies.

Characterization of Hydroxyapatite by Electron Microscopy

2005 ◽  
Vol 11 (6) ◽  
pp. 516-523 ◽  
Author(s):  
V. Rodríguez-Lugo ◽  
J. Sanchez Hernández ◽  
Ma. J. Arellano-Jimenez ◽  
P.H. Hernández-Tejeda ◽  
S. Recillas-Gispert
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Reaction Times ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Magnesian Calcite ◽  
Scanning Electron

The obtention of hydroxyapatite (HAp) is reported using brushite (CaHPO4·2H2O) and the skeleton of a starfish (Mellita eduardobarrosoi sp. nov.), primarily composed of magnesian calcite ((Ca,Mg)CO3) as precursors. Stoichiometric amounts of both were reacted under hydrothermal conditions: a pressure of 5.8 MPa and a temperature of 200°C for 2, 4, 6, 8, 10, and 20 h of reaction times. The samples obtained were characterized by means of scanning electron microscopy, X-ray diffraction, infrared spectroscopy, and transmission electron microscopy. Two defined populations of HAp fibers were found: A bundle of fibers 75 μm in length and 1–13 μm in diameter, and a second bundle of fibers 5 μm in length and less than 0.5 μm in diameter. Furthermore, an increase in HAp formation and a Ca/P ratio as a function of reaction time were observed. The growth mechanism of HAp is also discussed.

Formation of Water-Soluble Au-Nanobiocomposite with Dielectric Matrix

2019 ◽  
Vol 18 (03n04) ◽  
pp. 1940055
Author(s):  
G. Aleksandrova ◽  
B. Sukhov ◽  
B. Trofimov
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Au Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Natural Polysaccharide

Water-soluble potentially biocompatible Au-containing nanocomposites based on the natural polysaccharide arabinogalactan were prepared. They were investigated by electronic and infrared spectroscopies, X-ray diffraction analysis and transmission electron microscopy. Stable zero-valence Au nanoparticles with an average particle size of 5–8[Formula: see text]nm are formed in the natural macromolecular matrix. The nanocomposites obtained are aggregatively stable and of interest for applications in medicine.

Detonation Synthesis of Nano-Size Materials

1995 ◽  
Vol 418 ◽  
Author(s):  
J. Forbes ◽  
J. Davis ◽  
C. Wong
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nucleation And Growth ◽  
Detonation Synthesis ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Transmission Electron ◽  
Nano Size

AbstractThe detonation of explosives typically creates 100's of kbar pressures and 1000's K temperatures. These pressures and temperatures last for only a fraction of a microsecond as the products expand. Nucleation and growth of crystalline materials can occur under these conditions. Recovery of these materials is difficult but can occur in some circumstances. This paper describes the detonation synthesis facility, recovery of nano-size diamond, and plans to synthesize other nano-size materials by modifying the chemical composition of explosive compounds. The characterization of nano-size diamonds by transmission electron microscopy and electron diffraction, X-ray diffraction and Raman spectroscopy will also be reported.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Characterization of Fe–Ni(C) nanocapsules synthesized by arc discharge in methane

1999 ◽  
Vol 14 (5) ◽  
pp. 1782-1790 ◽  
Author(s):  
X. L. Dong ◽  
Z. D. Zhang ◽  
S. R. Jin ◽  
W. M. Sun ◽  
X. G. Zhao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Arc Discharge ◽  
Carbon Layer ◽  
Magnetization Measurement ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Energy Disperse Spectroscopy

Ultrafine Fe–Ni(C) particles of various compositions were prepared by arc discharge synthesis in a methane atmosphere. The particles were characterized by x-ray diffraction, transmission electron microscopy, energy disperse spectroscopy, chemical analysis, x-ray photoelectron spectroscopy, Mössbauer spectroscopy, and magnetization measurement. The carbon atoms solubilizing at interstitial sites in γ–(Fe, Ni, C) solution particles have the effects of forming austenite structure and changing microstructures as well as magnetic properties. A carbon layer covers the surface of Fe–Ni(C) particles to form the nanocapsules and protect them from oxidization. The mechanism of forming Fe–Ni(C) nanocapsules in the methane atmosphere was analyzed.

Sign in / Sign up

Export Citation Format

Share Document