LiV3O8 NANOMATERIAL AS ANODE WITH GOOD CYCLING PERFORMANCE FOR AQUEOUS RECHARGEABLE LITHIUM BATTERIES

2011 ◽  
Vol 04 (04) ◽  
pp. 315-318 ◽  
Author(s):  
L. L. LIU ◽  
W. TANG ◽  
S. TIAN ◽  
Y. SHI ◽  
Y. P. WU ◽  
...  
Keyword(s):  
Electrochemical Properties ◽  
Anode Material ◽  
Lithium Batteries ◽  
Aqueous Electrolyte ◽  
Sol Gel ◽  
Cycling Performance ◽  
Cyclic Voltammograms ◽  
Rechargeable Lithium Batteries ◽  
Gel Method ◽  
Sol Gel Method

LiV3O8 nanorod material was prepared by a simple sol–gel method. The electrochemical properties of the as-prepared LiV3O8 in 0.5 M Li2SO4 aqueous electrolyte were studied through cyclic voltammograms (CV) and discharge–charge measurements. Experiments show that this nanorod material can deliver the capacities of 72, 62 and 53 mAh/g at 20, 50, 100 mA/g, respectively. After 50 cycles, it can maintain 64, 47 and 40 mAh/g, corresponding to 88%, 76% and 77% of the initial capacities, which suggest that this nanorode material presents good cycling performance as anode material for aqueous rechargeable lithium batteries.

Synthesis of LiCoO2 via sol-gel method for aqueous rechargeable lithium batteries

Ionics ◽  
2017 ◽  
Vol 24 (2) ◽  
pp. 403-412 ◽  
Author(s):  
Nur Azilina Abdul Aziz ◽  
Tuti Katrina Abdullah ◽  
Ahmad Azmin Mohamad
Keyword(s):  
Lithium Batteries ◽  
Sol Gel ◽  
Rechargeable Lithium Batteries ◽  
Gel Method ◽  
Sol Gel Method

AlPO4-coated V2 O5 nanoplatelet and its electrochemical properties in aqueous electrolyte

2014 ◽  
Vol 86 (5) ◽  
pp. 651-659 ◽  
Author(s):  
Honglai Zhang ◽  
Jie Yang ◽  
Qichang Xiao ◽  
Zhaohui Li ◽  
Gangtie Lei ◽  
...  
Keyword(s):  
Lithium Batteries ◽  
Aqueous Electrolyte ◽  
Sol Gel ◽  
Rate Capability ◽  
Cycling Performance ◽  
Coated Sample ◽  
Rechargeable Lithium Batteries ◽  
Promising Application ◽  
Discharge Capacities ◽  
Good Rate Capability

Abstract Vanadium pentoxide (V2 O5) nanoplatelet was prepared through an exfoliation method by using β-cyclodextrin (β-CD) as intercalating template. To improve its electrochemical performance in the aqueous electrolyte, the nanoplatelet was coated with amorphous AlPO4 by sol-gel method. The effect of this coating layer on the rate and cycling properties is investigated by cyclic voltammetry and galvanostatic charge-discharge. The 1.6 % AlPO4-coated sample could deliver an initial capacity of 128 mAh g–1 at 0.1 C rate, and remain 99 % of the initial one after 50 cycles. The discharge capacities in the first cycle are 119, 113, and 104 mAh g–1 at the rates of 0.3, 1.5, and 3 C, respectively. The corresponding maintaining ratios are 98, 92, and 87 % after 50 cycles. The results suggest the AlPO4-coated V2 O5 nanoplatelet has good rate capability and cycling performance, indicating its promising application as an anode material in aqueous rechargeable lithium batteries.

Preparation of Cearmic Rechargeable Lithium Batteries with Sol-Gel Method

2001 ◽  
Vol 216 ◽  
pp. 123-126 ◽  
Author(s):  
Kiyoshi Kanamura ◽  
Minori Fujisaki ◽  
Young Ho Rho ◽  
Takao Umegaki
Keyword(s):  
Lithium Batteries ◽  
Sol Gel ◽  
Rechargeable Lithium Batteries ◽  
Gel Method ◽  
Sol Gel Method

Li0.95Na0.05Ti2(PO4)3/C with Good Performance as Anode Material for Aqueous Rechargeable Lithium Batteries

2014 ◽  
Vol 989-994 ◽  
pp. 316-319 ◽  
Author(s):  
Jing Zhu ◽  
Yong Guang Liu ◽  
Qing Qing Tian ◽  
Ling Wang ◽  
Ji Lin Cao
Keyword(s):  
Cyclic Voltammetry ◽  
Electrochemical Performance ◽  
Anode Material ◽  
Lithium Batteries ◽  
Sol Gel ◽  
Nasicon Structure ◽  
Galvanostatic Charge ◽  
Rechargeable Lithium Batteries ◽  
Structure And Morphology ◽  
Charge Discharge

Li0.95Na0.05Ti2(PO4)3/C nanocomposite was prepared by sol-gel method.The structure and morphology of the samples were characterized by XRD, SEM which showed the particles had typical NASICON structure and diameter range from 400~500nm. The electrochemical performance were tested by cyclic voltammetry and galvanostatic charge–discharge. Results show Li0.95Na0.05Ti2(PO4)3/C nanocomposite exhibitsmuch better electrochemical performance than bare Li0.95Na0.05Ti2(PO4)3.

Effect of Synthesis Conditions on the Structure and Electrochemical Properties of LiNi1/2Mn1/2O2 by Sol Gel Method

2011 ◽  
Vol 399-401 ◽  
pp. 1447-1450
Author(s):  
Zhi Yong Yu ◽  
Han Xing Liu
Keyword(s):  
Electrochemical Properties ◽  
Sol Gel ◽  
Electrochemical Analysis ◽  
X Ray Diffraction ◽  
Capacity Fading ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Synthesis Conditions ◽  
A Current

The layered LiNi1/2Mn1/2O2 cathode materials were synthesized by a sol gel method. The effects of calcination temperature and time on the structural and electrochemical properties of the LiNi1/2Mn1/2O2 were investigated. The prepared samples were characterized by X-ray diffraction (XRD) and electrochemical analysis. The results revealed that the layered LiNi1/2Mn1/2O2 material could be optimal synthesized at temperature of 900°C for 10h. The sample prepared under the above conditions has the highest initial discharge capacity of 151 mAh/g and showed no dramatic capacity fading during 20 cycles between 2.5-4.5V at a current rate of 20mA/g.

Sign in / Sign up

Export Citation Format

Share Document