Numerical Calculation of Ordered and Modulated Phases of Two-Dimensional ANNNI Model

1992 ◽  
Vol 61 (12) ◽  
pp. 4452-4464
Author(s):  
Yasuo Murai ◽  
Tohru Morita
2021 ◽  
Vol 9 (8) ◽  
pp. 892
Author(s):  
Xian Ma ◽  
Yongxian Wang ◽  
Xiaoqian Zhu ◽  
Wei Liu ◽  
Qiang Lan ◽  
...  

The accurate calculation of the sound field is one of the most concerning issues in hydroacoustics. The one-dimensional spectral method has been used to correctly solve simplified underwater acoustic propagation models, but it is difficult to solve actual ocean acoustic fields using this model due to its application conditions and approximation error. Therefore, it is necessary to develop a direct solution method for the two-dimensional Helmholtz equation of ocean acoustic propagation without using simplified models. Here, two commonly used spectral methods, Chebyshev–Galerkin and Chebyshev–collocation, are used to correctly solve the two-dimensional Helmholtz model equation. Since Chebyshev–collocation does not require harsh boundary conditions for the equation, it is then used to solve ocean acoustic propagation. The numerical calculation results are compared with analytical solutions to verify the correctness of the method. Compared with the mature Kraken program, the Chebyshev–collocation method exhibits higher numerical calculation accuracy. Therefore, the Chebyshev–collocation method can be used to directly solve the representative two-dimensional ocean acoustic propagation equation. Because there are no model constraints, the Chebyshev–collocation method has a wide range of applications and provides results with high accuracy, which is of great significance in the calculation of realistic ocean sound fields.


2009 ◽  
Vol 16-19 ◽  
pp. 1248-1252
Author(s):  
Chun Dong Zhu ◽  
Man Chun Zhang ◽  
Lin Hua

As an important forged part of an automobile, the inner hole of the half-shaft bushing must be formed directly. However, the process requires many steps, and how the forging, or deformation, is spread over the production steps directly affects the die life and forging force required. In this paper, the three steps involved in directly forging a half shaft bushing's inner hole are simulated using the two-dimensional finite element method. Further more, we improve the forging process. From numerical calculation, the improved necessary forging force is found to be only half the original force, and the die life is doubled.


2010 ◽  
Vol 670 ◽  
pp. 235-242 ◽  
Author(s):  
Y.W. Zhu ◽  
D.S. Kim ◽  
D.H. Kooa ◽  
Y.H. Cho

This paper investigates an optimal design of a double-sided slotted iron core type permanent magnet linear synchronous motor (PMLSM) using for ropeless elevator system. To obtain the optimal structure, the combination of response surface methodology (RSM) and two dimensional (2D) finite element analysis (FEA), which can solve the problem effectively without much time consuming, is utilized to investigate the PMLSM characteristics. Moreover, the detent force is more detailed analyzed with the manufacturing consideration. In final some numerical calculation results are reported to validate the applicability of this double-sided slotted iron core type PMLSM in ropeless elevator system. Introduction


2017 ◽  
Vol 24 (s3) ◽  
pp. 4-11 ◽  
Author(s):  
Jie Zhao ◽  
Lingyun Bao ◽  
Guixuan Wang

Abstract In an artificial island construction project based on the large-scale marine reclamation land, the soil settlement is a key to affect the late safe operation of the whole field. To analyze the factors of the soil settlement in a marine reclamation project, the SEM method in the soil micro-structural analysis method is used to test and study six soil samples such as the representative silt, mucky silty clay, silty clay and clay in the area. The structural characteristics that affect the soil settlement are obtained by observing the SEM charts at different depths. By combining numerical calculation method of Terzaghi’s one-dimensional and Biot’s two-dimensional consolidation theory, the one-dimensional and two-dimensional creep models are established and the numerical calculation results of two consolidation theories are compared in order to predict the maximum settlement of the soils 100 years after completion. The analysis results indicate that the micro-structural characteristics are the essential factor to affect the settlement in this area. Based on numerical analysis of one-dimensional and two-dimensional settlement, the settlement law and trend obtained by two numerical analysis method is similar. The analysis of this paper can provide reference and guidance to the project related to the marine reclamation land.


Sign in / Sign up

Export Citation Format

Share Document