BLOOD FLOW IN THE CIRCUMFLEX BRANCH OF THE LEFT CORONARY ARTERY OF THE INTACT DOG

1936 ◽  
Vol 117 (2) ◽  
pp. 271-279 ◽  
Author(s):  
Hiram E. Essex ◽  
J. F. Herrick ◽  
Edward J. Baldes ◽  
Frank C. Mann
1975 ◽  
Vol 39 (5) ◽  
pp. 788-795
Author(s):  
F. L. Belloni ◽  
D. E. Mohrman ◽  
H. V. Sparks

Coronary blood flow rate (ml-min-1–100 g-1) was estimated by a) measuring pump flow into the cannulated circumflex branch of the left coronary artery and dividing by the weight of perfused myocardium and b) measuring the clearance of 85Kr following intra-arterial injection (detection with a 2-in. crystal with cylindrical collimation). Although the correlation between the two measurements was relatively high (r equals 0.90), the line best fitting the data was 85Kr flow equals 0.55 pump flow + 25.6. We tested the possibility that the discrepancy between the two methods was primarily due to the counting of 85Kr removed from myocardium and delivered to lung. Relative efficiency of lung counting versus myocardial counting was determined as well as clearance pattern of 85Kr from lung in each dog. A simple mathematical model which assumes no recirculation of 85Kr to heart allowed correction of coronary clearance curves using this information. When corrected 85Kr flow equals 1.00 pump flow + 4.1 (r equals 0.90). Thus, the major systematic cause for the discrepancy between the two measurements under the conditions of this experiment appears to be simultaneous counting of 85Kr in lung and in myocardium.


2021 ◽  
pp. 1-18
Author(s):  
Abdulgaphur Athani ◽  
N.N.N. Ghazali ◽  
Irfan Anjum Badruddin ◽  
Sarfaraz Kamangar ◽  
Ali E. Anqi ◽  
...  

BACKGROUND: The blood flow in the human artery has been a subject of sincere interest due to its prime importance linked with human health. The hemodynamic study has revealed an essential aspect of blood flow that eventually proved to be paramount to make a correct decision to treat patients suffering from cardiac disease. OBJECTIVE: The current study aims to elucidate the two-way fluid-structure interaction (FSI) analysis of the blood flow and the effect of stenosis on hemodynamic parameters. METHODS: A patient-specific 3D model of the left coronary artery was constructed based on computed tomography (CT) images. The blood is assumed to be incompressible, homogenous, and behaves as Non-Newtonian, while the artery is considered as a nonlinear elastic, anisotropic, and incompressible material. Pulsatile flow conditions were applied at the boundary. Two-way coupled FSI modeling approach was used between fluid and solid domain. The hemodynamic parameters such as the pressure, velocity streamline, and wall shear stress were analyzed in the fluid domain and the solid domain deformation. RESULTS: The simulated results reveal that pressure drop exists in the vicinity of stenosis and a recirculation region after the stenosis. It was noted that stenosis leads to high wall stress. The results also demonstrate an overestimation of wall shear stress and velocity in the rigid wall CFD model compared to the FSI model.


1965 ◽  
Vol 15 (1) ◽  
pp. 131-132
Author(s):  
Richard I. Goldberg ◽  
Hoohang Bolooki ◽  
Harold I. Antell ◽  
Frederic Kavaler ◽  
Jackson H. Stuckey

2021 ◽  
Vol 11 (23) ◽  
pp. 11361
Author(s):  
Abdulgaphur Athani ◽  
Nik Nazri Nik Ghazali ◽  
Irfan Anjum Badruddin ◽  
Abdullah Y. Usmani ◽  
Sarfaraz Kamangar ◽  
...  

Coronary artery disease (CAD) is stated as one of the most common causes of death all over the world. This article explores the influence of multi stenosis in a flexible and rigid left coronary artery (LCA) model using a multiphase blood flow system which has not yet been studied. Two-way fluid–solid interaction (FSI) is employed to achieve flow within the flexible artery model. A realistic three-dimensional model of multi-stenosed LCA was reconstructed based on computerized tomography (CT) images. The fluid domain was solved using a finite volume-based commercial software (FLUENT 2020). The fluid (blood) and solid (wall) domains were fully coupled by using the ANSYS Fluid-Structure Interaction solver. The maximum pressure drops, and wall shear stress was determined across the sever stenosis (90% AS). The higher region of displacement occurs at the pre-stenosis area compared to the other area of the left coronary artery model. An increase in blood flow velocity across the restricted regions (stenosis) in the LCA was observed, whereas the recirculation zone at the post-stenosis and bifurcation regions was noted. An overestimation of hemodynamic descriptors for the rigid models was found as compared to the FSI models.


Author(s):  
M. O. Chyzh ◽  
A. O. Manchenko ◽  
A. V. Trofimova ◽  
I. V. Belochkina

Background. At present, there are attempts aimed at repairing the myocardium affected by acute myocardial infarction (MI) via biologically sourced drugs, which are able to stimulate reparative regeneration, including the use of mesenchymal stromal cells (MSCs). On the other hand, therapeutic hypothermia initially after the occurrence of impaired blood flow in the coronary arteries aids in reducing the level of metabolism in cardiomyocytes and, accordingly, suppressing the formation of free radicals and inhibiting apoptosis. Purpose – рerforming and analysing Doppler sonography of the ascending aorta in rats with experimental MI in order to assess the systolic function of the left ventricular myocardium influenced by the combined use of therapeutic hypothermia and administering allogeneic MSCs. Materials and methods. The study involved 90 outbred white rats weighing 240–270 g. Myocardial infarction was reproduced by ligating the left coronary artery. Therapeutic hypothermia was performed in a cold chamber, 60 minutes long. The local skin temperature of the neck area was maintained at +4 оС. A suspension of allogeneic cryopreserved MSCs of the placenta was administered once intravenously. Sonography of the ascending aorta on day 7 and day 30 after ligating the coronary artery was carried out by means of «Сономед 500» ultrasound scanner in B-mode with the Doppler (PW-mode). Results. Studying the aortic blood flow showed that on day 7 after ligating the coronary artery, rats had a decrease in max systolic velocity and a tendency to increase diastolic blood flow velocity. Those changes influenced the pulsatility index and systolic-diastolic ratio. A 19 % decrease in the Stewart index confirmed the development of systolic dysfunction in the control group, the severity of which did not decrease until day 30 of the experiment. The impact of allogeneic MSCs on the process of remodeling the heart of rats after ligating the left coronary artery was evident on day 7 (acute stage of myocardial infarction) via abnormally low (below control) blood flow in the aorta with complete hemodynamics restoring on day 30 of the experiment. The combination of therapeutic hypothermia and administering allogeneic MSCs aided in the minimal deviation of hemodynamic parameters from the normal range. On day 7, there was only an increase in the average aortic blood flow rate by 29%, and a decrease in systolic-diastolic ratio by 12% compared to the corresponding normal range, suggesting compensation of the pumping function of the myocardium. Conclusions. Doppler assessment of systolic and diastolic blood flow velocities in the ascending aorta of rats makes it possible to indirectly record the presence and severity of systolic dysfunction of the left ventricle and follow up myocardial contractile function affected by MI. The combination of therapeutic hypothermia and administering allogeneic MSCs after ligating the left coronary artery helps to maintain hemodynamic parameters in the aorta at a level close to normal range during the acute phase of myocardial infarction as well as at the stage of scarring.


2021 ◽  
Vol 39 (3) ◽  
pp. 895-905
Author(s):  
Saleem K. Kadhim ◽  
Mohammed G. Al-Azawy ◽  
Sinan Abdul-Ghafar Ali ◽  
Mina Qays Kadhim

Cardiovascular diseases were the main cause for loosing lives in the last decades due to the restricted blood flow states in the blood vessels areas. Numerical investigations have been conducted as the aim of this work to examine the blood flow, and wall shear stresses adjacent to the mono stenosis up to different degrees involved in the main, side and distal main branches as well as observe the pulsatile flow of blood in the left coronary artery through various percentage of stenosis. Both the Carreau non-Newtonian rheological model and the Newtonian model were utilized to model the blood fluid and wall shear stresses of left coronary artery, in a row, all the calculated data were validated with the previously published papers. It was found that the blood flow inside areas of the artery lie within the range of non-Newtonian rheological effects can be present, verifying the need to treat blood as non-Newtonian fluid; especially, with the case of 90% blockage.


Sign in / Sign up

Export Citation Format

Share Document