scholarly journals A Validated RP-HPLC Method for Simultaneous Estimation of Atenolol and Indapamide in Pharmaceutical Formulations

2011 ◽  
Vol 8 (3) ◽  
pp. 1238-1245 ◽  
Author(s):  
G. Tulja Rani ◽  
D. Gowri Sankar ◽  
P. Kadgapathi ◽  
B. Satyanarayana

A simple, fast, precise, selective and accurate RP-HPLC method was developed and validated for the simultaneous determination of atenolol and indapamide from bulk and formulations. Chromatographic separation was achieved isocratically on a Waters C18 column (250×4.6 mm, 5 µ particle size) using a mobile phase, methanol and water (adjusted to pH 2.7 with 1% orthophosphoric acid) in the ratio of 80:20. The flow rate was 1 mL/min and effluent was detected at 230 nm. The retention time of atenolol and indapamide were 1.766 min and 3.407 min. respectively. Linearity was observed in the concentration range of 12.5-150 µg/mL for atenolol and 0.625-7.5 µg/mL for indapamide. Percent recoveries obtained for both the drugs were 99.74-100.06% and 98.65-99.98% respectively. The method was validated according to the ICH guidelines with respect to specificity, linearity, accuracy, precision and robustness. The method developed can be used for the routine analysis of atenolol and indapamide from their combined dosage form.

2017 ◽  
Vol 5 (01) ◽  
pp. 48-50
Author(s):  
Uttam Kumar Agrawal ◽  
Jeyabalan Govindasamy

A new simple, accurate ,precise and reproducible RP-HPLC method has been developed for simultaneous estimation of metformin and pioglitazone in bulk drug form using proper HPLC system. The mobile phase consists of phosphate buffer and acetonitrile in the ratio of 35:65 at pH 3.4.The detection wavelength was carried out at 228 nm. The method was linear over the concentration range for metformin 50-100 μg/mL and for pioglitazone 20-180 μg/mL. The recoveries of metformin and pioglitazone were found to be 100.5 and 98.7% respectively. The validation of method was carried out utilizing ICH-guidelines. The described HPLC method method was successfully for the analysis of pharmaceutical formulations containing dosage form.


2019 ◽  
Vol 9 (1) ◽  
pp. 170-174
Author(s):  
Anjali Bakshi ◽  
K Monika ◽  
Shweta Bhutada ◽  
M. Bhagvan Raju

A simple, selective, linear, precise, and accurate RP-HPLC method was developed and validated for the simultaneous estimation of Gabapentin & Methylcobalamin from bulk and formulation. Chromatographic separation was achieved Isocratically on an Inertsil C18 column (150x4.6, 5µ particle size) using a mobile phase Buffer: Acetonitrile in the ratio of 60:40 v/v. The flow rate was 1.0 ml/min, effluents were detected at 264 nm and 10µl of sample was injected. Retention time of Gabapentin & Methylcobalamin was found to be 2.7 and 4.13 min respectively. Linearity of the method was in the concentration range of 25-150 µg for Gabapentin & 0.125-0.750 µg for Methylcobalamin. Percent recoveries obtained for both the drugs were 100.00%. The percentage RSD for precision of the method was found to be less than 2%. The method was validated according to the ICH guidelines. The method developed was successfully applied for the analysis of simultaneous estimation of Gabapentin & Methylcobalamin tablets and was fairly good in comparison with other methods. Keywords: Gabapentin, Methylcobalamin, HPLC.


2011 ◽  
Vol 2011 ◽  
pp. 1-3 ◽  
Author(s):  
M. V. Basaveswara Rao ◽  
A. V. D. Nagendrakumar ◽  
Sushanta Maiti ◽  
Guttikonda Raja

A simple, selective, linear, precise, and accurate RP-HPLC method was developed and validated for the rapid assay of the Buspirone in tablet dosage form. Isocratic elution at a flow rate of 1.0 mL/min was employed on a symmetry C18 (250×4.6 mm, 5 μm in particle size) at ambient temperature. The mobile phase consisted of water : acetonitrile : methanol 45 : 35 : 20(V/V). The UV detection wavelength was 210 nm, and 20 μL sample was injected. The retention time for the Buspirone was 7.057 min. The percentage RSD for precision and accuracy of the method was found to be less than 2%. The method was validated as per the ICH guidelines. The method can be successfully applied for the routine analysis of Buspirone in tablet dosage form.


INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (02) ◽  
pp. 20-33
Author(s):  
N. S Kumar ◽  
◽  
R Kumaraswamy ◽  
S. Shantikumar ◽  
D. Paul

The present study describes the separation and simultaneous estimation of eight anti-retroviral drugs, namely, Telaprevir (TPV), Emtricitabine (ECB), Fosamprenavir (FANV), Tenofavir (TNF), Ritonavir (RNV), Raltegravir (RGV) and Oseltamivir (OSMV) and Zidovudine (ZDV) as an active pharmaceutical ingredient, by RP-HPLC method by applying the principles of Quality by Design (QbD). An application of DoE (Design of Experiments) full factorial design was used for initial screening and optimization. The final optimized method consists of separation being carried out on a Fortis C18 column (150 mm × 4.6 mm, 5μ particle size) using acetonitrile and 10 mm ammonium formate buffer (pH 3 adjusted with formic acid) using a gradient program. The quantitative evaluation was performed with a diode array detector at 251 nm and 230 nm with a flow rate of 1 mL min–1. Suitability of this method for the quantitative determination of the drugs was proved by validation in accordance with the International Conference on Harmonization (ICH) guidelines. The method is selective, precise, robust and accurate and can be used for routine analysis of pharmaceutical formulations in quality control and counterfeit screening.


Author(s):  
Sonalika Patro ◽  
S. Harshith Kumar ◽  
M. Barath kumar ◽  
E. Masthaniah ◽  
K. Sairam ◽  
...  

A Simple, accurate and precise method was developed and validated for the determination of flucloxacillin sodium in its tablet dosage form. The separation was eluted on xterra c18 column (4.6x150mm, 5micron) using a mixture of octane buffer and methanol as mobile phase in a ratio of (30:70) which was pumped through column at a flow rate of  1ml/min. Optimised wavelength for flucloxacillin was 237nm, the retention time was 2.305minutes and the percentage purity was found to be 98.14%. System suitability parameters such as theoretical plate and tailing factor for flucloxacillin sodium was found to be 2991.64 and 1.90 respectively, the proposed method was validated as per ICH guidelines (ICH, Q2 AND (R1)) the method was found to be linear at the concentration range of 20-100µg/ml and the correlation coefficient (r2) value was found to be 0.9994 percentage RSD for precision was 0.9% and percentage RSD for ruggedness was 0.5%. The precision study was precise, robust and repeatable. The LOD and LOQ values are 2.98 and 9.98 respectively. Hence the suggested RP-HPLC method can be used for routine analysis for flucloxacillin sodium in tablet dosage form.


2020 ◽  
Vol 66 (1) ◽  
pp. 85-90
Author(s):  
Zhaklina Poposka Svirkova ◽  
Zorica Arsova-Sarafinovska ◽  
Aleksandra Grozdanova

Due to the low absorptivity of bile acids, the aim of this study was to develop and validate a simple and sensitive HPLC/UV method for quantification of ursodeoxycholic acid (UDCA) in pharmaceutical formulations. Effective separation was achieved on C18 end–capped column, with gradient elution of a mobile phase composed of 0.001 M phosphate buffer (pH 2.8±0.5) – acetonitrile mix, at flow rate 1.5 mL min-1, UV detection at 200 nm and injection volumes were 50 µL. The proposed HPLC method was fully validated according to the ICH guidelines and it was found to be simple, accurate, precise and robust. Key words: ursodeoxycholic acid, HPLC/UV, pharmaceutical formulations, validation


2010 ◽  
Vol 93 (1) ◽  
pp. 102-107 ◽  
Author(s):  
Biljana Jancic-Stojanović ◽  
Andjelija Malenović ◽  
Slavko Marković ◽  
Darko Ivanović ◽  
Mirjana Medenica

Abstract An RP-HPLC method has been optimized and validated for the simultaneous determination of hydrocortisone acetate and of lidocaine in suppositories. For the method optimization, response surface methodology was applied, and the obtained model was tested using analysis of variance. The optimal separations were conducted on a Beckman-Coulter 150 4.6 mm, 5 µm particle-size column at 20C. The mobile phase was methanolwater (65 + 35, v/v), pH adjusted to 2.5 with 85% orthophosphoric acid, with a flow rate of 1.0 mL/min. UV detection was performed at 250 nm. Phenobarbital was used as an internal standard. The method was validated for selectivity, linearity, precision, and robustness.


2019 ◽  
Vol 9 (1) ◽  
pp. 175-179 ◽  
Author(s):  
BANGARUTHALLI JAGIRAPU ◽  
U Harini ◽  
M Divya ◽  
P Sushma

A new method has been established for the simultaneous estimation of Telmisartan and Atorvastatin calcium by RP-HPLC method. The chromatographic conditions were successfully developed for the separation of Telmisartan and Atorvastatin calcium by using boston ODS C18 column, flow rate was 1.0ml/min, mobile Phase consists of methanol:Acetonitrile:buffer in ratio of 35:25:40. Detection wave length was 235nm.The instrument used was SHIMADZU HPLC auto sampler. The retention time of Atorvastatin calcium and Telmisartan was found to be 2.350 and 3.490 minutes respectively. The analytical method was validated according to ICH guidelines (ICH Q2b). The correlation coefficient (r2) was found to be 0.997 and 0.999 for Telmisartan and Atorvastatin calcium respectively. % mean recovery was found to be 100.943% and 100.576% for Telmisartan and Atorvastatin calcium respectively. %RSD for precision on replicate injection was 0.46 and 0.70 for Telmisartan and Atorvastatin calcium respectively. The validation study was found to be precise, robust, and repeatable. Keywords: Telmisartan, Atorvastatin calcium, ICH guidelines, Validation.


2018 ◽  
Vol 1 (1) ◽  
pp. 12-21

A new, simple, precise, accurate and reproducible RP-HPLC method for simultaneous estimation of Amitriptyline and Perphenazine in bulk and pharmaceutical formulations was developed. Separation of Amitriptyline and Perphenazine was successfully achieved on Inertsil ODS (250x4.6mm) 5µm column in an isocratic mode utilizing Methanol: ACN: Water (50:30:20) at a flow rate of 1.0 ml/min and eluents were monitored at 253nm with a retention time of 2.440 and 5.503 minutes for Amitriptyline and Perphenazine respectively. The method was validated and it was found to be linear. The values of the correlation coefficient were found to 0.992 for Amitriptyline and 0.9992 for Perphenazine respectively. The LOD for Perphenazine and Amitriptyline were found to be and 33.8µg/ml and 4.2 µg/ml. The LOQ for Perphenazine and Amitriptyline were found to be 20.88µg/ml and 12.12µg/ml respectively. The percentage recoveries for Amitriptyline and Perphenazine were found to be within the limit indicates that the proposed method is highly accurate. The method was extensively validated according to ICH guidelines.


2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
M. V. Basaveswara Rao ◽  
A. V. D Nagendrakumar ◽  
Sushanta Maiti ◽  
N. Chandrasekhar

A simple, selective, linear, precise, and accurate RP-HPLC method was developed and validated for rapid assay of Pizotifen in pharmaceutical dosage form. Isocratic elution at a flow rate of 1.0 mL/min was employed on Chromosil C18 (250 mm × 4.6 mm, 5 μm) column at ambient temperature. The mobile phase consists of methanol : acetonitrile in the ratio of 10 : 90 v/v. The UV detection wavelength was 230 nm, and 20 μL sample was injected. The retention time for Pizotifen was 2.019 min. The percent RSD for accuracy of the method was found to be 0.2603%. The method was validated as per the ICH guidelines. The method can be successfully applied for routine analysis of Pizotifen in the rapid and reliable determination of Pizotifen in pharmaceutical dosage form.


Sign in / Sign up

Export Citation Format

Share Document