scholarly journals Stability indicating RP-HPLC method for the estimation of flucloxacillin sodium in a tablet dosage form

Author(s):  
Sonalika Patro ◽  
S. Harshith Kumar ◽  
M. Barath kumar ◽  
E. Masthaniah ◽  
K. Sairam ◽  
...  

A Simple, accurate and precise method was developed and validated for the determination of flucloxacillin sodium in its tablet dosage form. The separation was eluted on xterra c18 column (4.6x150mm, 5micron) using a mixture of octane buffer and methanol as mobile phase in a ratio of (30:70) which was pumped through column at a flow rate of  1ml/min. Optimised wavelength for flucloxacillin was 237nm, the retention time was 2.305minutes and the percentage purity was found to be 98.14%. System suitability parameters such as theoretical plate and tailing factor for flucloxacillin sodium was found to be 2991.64 and 1.90 respectively, the proposed method was validated as per ICH guidelines (ICH, Q2 AND (R1)) the method was found to be linear at the concentration range of 20-100µg/ml and the correlation coefficient (r2) value was found to be 0.9994 percentage RSD for precision was 0.9% and percentage RSD for ruggedness was 0.5%. The precision study was precise, robust and repeatable. The LOD and LOQ values are 2.98 and 9.98 respectively. Hence the suggested RP-HPLC method can be used for routine analysis for flucloxacillin sodium in tablet dosage form.

2011 ◽  
Vol 2011 ◽  
pp. 1-3 ◽  
Author(s):  
M. V. Basaveswara Rao ◽  
A. V. D. Nagendrakumar ◽  
Sushanta Maiti ◽  
Guttikonda Raja

A simple, selective, linear, precise, and accurate RP-HPLC method was developed and validated for the rapid assay of the Buspirone in tablet dosage form. Isocratic elution at a flow rate of 1.0 mL/min was employed on a symmetry C18 (250×4.6 mm, 5 μm in particle size) at ambient temperature. The mobile phase consisted of water : acetonitrile : methanol 45 : 35 : 20(V/V). The UV detection wavelength was 210 nm, and 20 μL sample was injected. The retention time for the Buspirone was 7.057 min. The percentage RSD for precision and accuracy of the method was found to be less than 2%. The method was validated as per the ICH guidelines. The method can be successfully applied for the routine analysis of Buspirone in tablet dosage form.


Author(s):  
Krishna Kishore Adireddy ◽  
Srinivasa Rao Baratam ◽  
Nagarjuna Hari Pratap S

A simple, rapid, accurate and precise RP-HPLC method was developed and validated for the determination of Istradefylline in table dosage form. Chromatographic analysis of the drug was achieved on Shimadzu HPLC comprising of LC- 20 AD binary gradient pump, a variable wavelength programmable SPD-20A detector and SCL system controller. C18G column (250 mm x 4.6 mm, 5 μ) as stationary phase with mobile phase consisting of 0.1 % orthophosphoric acid and acetonitrile in the ratio of 30: 70 v/v. The method showed a good linear response in the concentration range of 10-90 μg/ml with correlation coefficient of 0.9993. The flow rate was maintained at 1.0 ml/min and detection was carried out at 246 nm. The retention time was 3.125 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, solution stability, selectivity and sensitivity. The results obtained in the study were within the limits of ICH guidelines and hence this method can be used for the determination of istradefylline in tablet formulation.


2011 ◽  
Vol 8 (3) ◽  
pp. 1238-1245 ◽  
Author(s):  
G. Tulja Rani ◽  
D. Gowri Sankar ◽  
P. Kadgapathi ◽  
B. Satyanarayana

A simple, fast, precise, selective and accurate RP-HPLC method was developed and validated for the simultaneous determination of atenolol and indapamide from bulk and formulations. Chromatographic separation was achieved isocratically on a Waters C18 column (250×4.6 mm, 5 µ particle size) using a mobile phase, methanol and water (adjusted to pH 2.7 with 1% orthophosphoric acid) in the ratio of 80:20. The flow rate was 1 mL/min and effluent was detected at 230 nm. The retention time of atenolol and indapamide were 1.766 min and 3.407 min. respectively. Linearity was observed in the concentration range of 12.5-150 µg/mL for atenolol and 0.625-7.5 µg/mL for indapamide. Percent recoveries obtained for both the drugs were 99.74-100.06% and 98.65-99.98% respectively. The method was validated according to the ICH guidelines with respect to specificity, linearity, accuracy, precision and robustness. The method developed can be used for the routine analysis of atenolol and indapamide from their combined dosage form.


Author(s):  
V. N. V. KISHORE ◽  
G. V. RAMANA

Objective: Stability representing the RP-HPLC method was established for synchronized quantification of Tigecycline and its impurities. This method was confirmed for its applicability to both tablet dosage and bulk drug forms. Methods: Intended for an isocratic elution, a mobile phase containing methanol: 10 mmol Triethylamine Buffer mixture (75:25 v/v, pH 6.1) was used at 1 ml/min flow rate and Agilent ZORBAX Eclipse XDB C18 (250 mm × 4.6 mm, 5 μm) column. Results: At 231 nm as wavelength, high-pitched peaks of Tigecycline (Tig) and its impurities (1and2) were detected at 6.55, 8.73 and 4.87 min correspondingly. The linearity of tigecycline and its impurities (impurity-1 and 2 and) were estimated with ranging from 75–450 µg/ml for Tigecycline and 1–6 µg/ml for both impurity 1 and 2. The corresponding recognition limits (LOD and LOQ) of the tigecycline and its impurities were originated to be (1.37,0.047 and 0.071 µg/ml) and (4.15, 0.143 and 0.126 µg/ml). Conclusion: The technique was effectively stretched for stability signifying studies under different stress conditions. Justification of the method was done as per the current ICH guidelines.


2019 ◽  
Vol 9 (1) ◽  
pp. 175-179 ◽  
Author(s):  
BANGARUTHALLI JAGIRAPU ◽  
U Harini ◽  
M Divya ◽  
P Sushma

A new method has been established for the simultaneous estimation of Telmisartan and Atorvastatin calcium by RP-HPLC method. The chromatographic conditions were successfully developed for the separation of Telmisartan and Atorvastatin calcium by using boston ODS C18 column, flow rate was 1.0ml/min, mobile Phase consists of methanol:Acetonitrile:buffer in ratio of 35:25:40. Detection wave length was 235nm.The instrument used was SHIMADZU HPLC auto sampler. The retention time of Atorvastatin calcium and Telmisartan was found to be 2.350 and 3.490 minutes respectively. The analytical method was validated according to ICH guidelines (ICH Q2b). The correlation coefficient (r2) was found to be 0.997 and 0.999 for Telmisartan and Atorvastatin calcium respectively. % mean recovery was found to be 100.943% and 100.576% for Telmisartan and Atorvastatin calcium respectively. %RSD for precision on replicate injection was 0.46 and 0.70 for Telmisartan and Atorvastatin calcium respectively. The validation study was found to be precise, robust, and repeatable. Keywords: Telmisartan, Atorvastatin calcium, ICH guidelines, Validation.


2020 ◽  
Vol 13 (1) ◽  
pp. 44-51
Author(s):  
S.Afreen Sultana ◽  
Patta. Salomi ◽  
T. VimalakKannan ◽  
K.Ravindra Reddy

In present study, accurate, precise, rapid and sensitive stability indicting HPLC-UV method has been established for quantification of Telmisartan, Cilnidipine and Chlorthalidone simultaneously in Tablet and bulk. Telmisartan, Cilnidipine and Chlorthalidone were resoluted on Sunsil C18 column (4.6mmx250mm; 5μm) using mobile phase containing Acetonitrile and Potassium dihydrogen phosphate in 50:50(v/v) ratio with flow rate of 1ml/min at 238 nm. Concentrations were linear over the range of 40-120 μg/ml for Telmisartan, 10-30 μg/ml for Cilnidipine and 6.25-18.75 μg/ml for Chlorthalidone. The percentage recovery was found to be 99.70-100.51% for Telmisartan, 98.41-100.49% for Cilnidipine and 99.34-100.48% for Chlorthalidone. % RSD for peak area was 0.069% for Telmisartan, 0.058% for Cilnidipine and 0.057% for Chlorthalidone shows that the proposed method is precise. Force-degradation studies have not shown any observable change in the results and hence the proposed method is stability indicating and hence the method is suitable for routine analysis of Telmisartan, Cilnidipine and Chlorthalidone in bulk and tablet dosage form.


2021 ◽  
Vol 14 (1) ◽  
pp. 169-174
Author(s):  
Wrushali A. Panchale ◽  
Shivrani W. Nimbokar ◽  
Bhushan R. Gudalwar ◽  
Ravindra L. Bakal ◽  
Jagdish V. Manwar

RP-HPLC method was developed for simultaneous determination of escitalopram oxalate (ESC) and flupentixol HCl (FLU) in tablet dosage form. Mobile phase consisting of mixture of acetonitrile and potassium phosphate buffer (pH 7.0 with 0.1% triethylamine) in the ratio 60: 40 at flow rate of 1ml/min using C18 Grace (250mmX 4.6mm) column at 231 nm. The retention time of ESC with FLU was found to be 2.96 min and 6.98 min, respectively. The linearity range for ESC with FLU observed was 5-25 µg/ml and 10-50 µg/ml, respectively. Method was validated as per ICH guidelines. Validation parameters studied were linearity and range, recovery study, precision, LOD, LOQ and robustness. Statistical data obtained was found to satisfactorily.


2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
M. V. Basaveswara Rao ◽  
A. V. D Nagendrakumar ◽  
Sushanta Maiti ◽  
N. Chandrasekhar

A simple, selective, linear, precise, and accurate RP-HPLC method was developed and validated for rapid assay of Pizotifen in pharmaceutical dosage form. Isocratic elution at a flow rate of 1.0 mL/min was employed on Chromosil C18 (250 mm × 4.6 mm, 5 μm) column at ambient temperature. The mobile phase consists of methanol : acetonitrile in the ratio of 10 : 90 v/v. The UV detection wavelength was 230 nm, and 20 μL sample was injected. The retention time for Pizotifen was 2.019 min. The percent RSD for accuracy of the method was found to be 0.2603%. The method was validated as per the ICH guidelines. The method can be successfully applied for routine analysis of Pizotifen in the rapid and reliable determination of Pizotifen in pharmaceutical dosage form.


Author(s):  
Krishna Kishore Adireddy ◽  
Srinivasa Rao Baratam ◽  
Nagarjuna Hari Pratap S.

A simple, rapid, accurate and precise RP-HPLC method was developed and validated for the determination of Etelcalcetide in bulk and parentral dosage form. Quantification of the drug was achieved on Shimadzu HPLC comprising of LC- 20 AD binary gradient pump, a variable wavelength programmable SPD-20A detector and SCL system controller. C18G column (250 mm x 4.6 mm, 5 μ) as stationary phase with mobile phase consisting of acetonitrile: methanol :water in the ratio of 25: 45 :30 v/v. The method showed a good linear response in the concentration range of 3.75-22.5 μg/ml with correlation coefficient of 0.9999. The flow rate was maintained at 1.0 ml/min and effluents were monitored at 238 nm. The retention time of etelcalcetide was 6.201 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, solution stability, selectivity and sensitivity. The results obtained in the study were within the limits of ICH guidelines and hence this method can be used for the determination of etelcalcetide in bulk and parentral dosage form.


2017 ◽  
Vol 4 (3) ◽  
pp. 180 ◽  
Author(s):  
Suraj Sahoo ◽  
Suman Kumar Mekap

Objective: In the present work, RP-HPLC procedure is optimized to finalize a different approach for the estimation of rivaroxaban in tablet dosage form. A novel drug rivaroxaban used as anti-coagulant in the patients for the prevention of thromboembolism.Methods: The molecule is identified with the molar mass of 435.882 g/mol and molecular formula C19H18ClN3O5S. The determination was executed by C18 column (Phenomenex 250 x 4.6 mm, 5 μm maintained at 35°C) at 251 nm with a mobile phase (ACN: Water, 55:45 v/v) and flow of 1.2 ml/min.Results: The retention time found to be about 3.8minutes.The validation parameters performed as per ICH guidelines and found to be within acceptance criteria. Linearity of the method is found to be accepted across five concentration level i.e. being studied by calibration curve. Accuracy was executed at three different concentrations, the amount being recovered are close to 100%. The % RSD values obtained for repeatability, intermediate and reproducibility under precision are within acceptance criteria.Conclusions: The method was accurate, precise, robust and rapid for quantitative determination of rivaroxaban by High Performance Liquid Chromatography.


Sign in / Sign up

Export Citation Format

Share Document