scholarly journals A Maximum Power Point Tracker with Automatic Step Size Tuning Scheme for Photovoltaic Systems

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Kuei-Hsiang Chao ◽  
Yu-Hsu Lee
Keyword(s):  
Steady State ◽  
Dynamic Response ◽  
Maximum Power ◽  
Step Size ◽  
Maximum Power Point ◽  
Pv Systems ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point ◽  
Steady State Performance

The purpose of this paper is to study on a novel maximum power point tracking (MPPT) method for photovoltaic (PV) systems. First, the simulation environment for PV systems is constructed by using PSIM software package. A 516 W PV system established with Kyocera KC40T photovoltaic modules is used as an example to finish the simulation of the proposed MPPT method. When using incremental conductance (INC) MPPT method, it usually should consider the tradeoff between the dynamic response and the steady-state oscillation, whereas the proposed modified incremental conductance method based on extension theory can automatically adjust the step size to track the maximum power point (MPP) of PV array and effectively improve the dynamic response and steady-state performance of the PV systems, simultaneously. Some simulation and experimental results are made to verify that the proposed extension maximum power point tracking method can provide a good dynamic response and steady-state performance for a photovoltaic power generation system.

scholarly journals Direct Fixed-Step Maximum Power Point Tracking Algorithms with Adaptive Perturbation Frequency

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 399 ◽  
Author(s):  
Eyal Amer ◽  
Alon Kuperman ◽  
Teuvo Suntio
Keyword(s):  
Steady State ◽  
Maximum Power Point Tracking ◽  
Maximum Power ◽  
Step Size ◽  
Maximum Power Point ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Variable Step ◽  
Perturbation Frequency ◽  
Power Point

Owing to the good trade-off between implementation and performance, fixed-step direct maximum power point tracking techniques (e.g., perturb and observe and incremental conductance algorithms) have gained popularity over the years. In order to optimize their performance, perturbation frequency and perturbation step size are usually determined a priori. While the first mentioned design parameter is typically dictated by the worst-case settling time of the combined energy conversion system, the latter must be high enough to both differentiate the system response from that caused by irradiation variation and match the finite resolution of the analog-to-digital converter in case of digital implementation. Well-established design guidelines, however, aim to optimize steady-state algorithm performance while leaving transients nearly untreated. To improve transient behavior while keeping the steady-state operation unaltered, variable step direct maximum power point tracking algorithms based on adaptive perturbation step size were proposed. This paper proposes a concept of utilizing adaptive perturbation frequency rather than variable step size, based on recently revised guidelines for designing fixed-step direct maximum power point tracking techniques. Preliminary results demonstrate the superiority of the proposed method over adaptive perturbation step size operation during transients, without compromising the steady state performance.

scholarly journals Simulation and Analysis of Perturbation and Observation-Based Self-Adaptable Step Size Maximum Power Point Tracking Strategy with Low Power Loss for Photovoltaics

Energies ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 92 ◽  
Author(s):  
Yinxiao Zhu ◽  
Moon Kim ◽  
Huiqing Wen
Keyword(s):  
Steady State ◽  
Power Loss ◽  
Response Speed ◽  
Maximum Power ◽  
Step Size ◽  
Maximum Power Point ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Steady State Operation ◽  
Power Point

Photovoltaic (PV) techniques are widely used in daily life. In addition to the material characteristics and environmental conditions, maximum power point tracking (MPPT) techniques are an efficient means to maximize the output power and improve the utilization of solar power. However, the conventional fixed step size perturbation and observation (P&O) algorithm results in perturbations and power loss around the maximum power point in steady-state operation. To reduce the power loss in steady-state operation and improve the response speed of MPPT, this study proposes a self-adaptable step size P&O-based MPPT algorithm with infinitesimal perturbations. This algorithm combines four techniques to upgrade the response speed and reduce the power loss: (1) system operation state determination, (2) perturbation direction decision, (3) adaptable step size, and 4) natural oscillation control. The simulation results validate the proposed algorithm and illustrate its performances in operational procedures.

scholarly journals A Modification of the Perturb and Observe Method to Improve the Energy Harvesting of PV Systems under Partial Shading Conditions

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2521
Author(s):  
Alfredo Gil-Velasco ◽  
Carlos Aguilar-Castillo
Keyword(s):  
Maximum Power ◽  
Global Maximum ◽  
Pv System ◽  
Maximum Power Point ◽  
Partial Shading ◽  
Pv Systems ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point ◽  
Computational Resources

There are multiples conditions that lead to partial shading conditions (PSC) in photovoltaic systems (PV). Under these conditions, the harvested energy decreases in the PV system. The maximum power point tracking (MPPT) controller aims to harvest the greatest amount of energy even under partial shading conditions. The simplest available MPPT algorithms fail on PSC, whereas the complex ones are effective but require high computational resources and experience in this type of systems. This paper presents a new MPPT algorithm that is simple but effective in tracking the global maximum power point even in PSC. The simulation and experimental results show excellent performance of the proposed algorithm. Additionally, a comparison with a previously proposed algorithm is presented. The comparison shows that the proposal in this paper is faster in tracking the maximum power point than complex algorithms.

Maximum Power Point Tracking (MPPT) for a Solar Photovoltaic System: A Review

2015 ◽  
Vol 787 ◽  
pp. 227-232 ◽  
Author(s):  
L.A. Arun Shravan ◽  
D. Ebenezer
Keyword(s):  
Solar Energy ◽  
Maximum Power Point Tracking ◽  
Maximum Power ◽  
Nonlinear Behaviour ◽  
Pv System ◽  
Maximum Power Point ◽  
Pv Systems ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point

In recent years there has been a growing attention towards use of solar energy. Advantages of photovoltaic (PV) systems employed for harnessing solar energy are reduction of greenhouse gas emission, low maintenance costs, fewer limitations with regard to site of installation and absence of mechanical noise arising from moving parts. However, PV systems suffer from relatively low conversion efficiency. Therefore, maximum power point tracking (MPPT) for the solar array is essential in a PV system. The nonlinear behaviour of PV systems as well as variations of the maximum power point with solar irradiance level and temperature complicates the tracking of the maximum power point. This paper reviews various MPPT methods based on three categories: offline, online and hybrid methods. Design of a PV system in a encoding environment has also been reviewed here. Furthermore, different MPPT methods are discussed in terms of the dynamic response of the PV system to variations in temperature and irradiance, attainable efficiency, and implementation considerations.

Maximum Power Point Tracking of Multi-String Photovoltaic Array via Simultaneous Perturbation Stochastic Approximation

2013 ◽  
Author(s):  
Yan Xiao ◽  
Yaoyu Li ◽  
John E. Seem ◽  
Kaushik Rajashekara
Keyword(s):  
Stochastic Approximation ◽  
Maximum Power Point Tracking ◽  
Maximum Power ◽  
Pv System ◽  
Maximum Power Point ◽  
Simultaneous Perturbation Stochastic Approximation ◽  
Pv Systems ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point

This paper presents a Maximum Power Point Tracking (MPPT) strategy for multi-string photovoltaic (PV) systems using the Simultaneous Perturbation Stochastic Approximation (SPSA) algorithm. The multi-string PV system considered is a decentralized control configuration, controlling the voltage reference to each PV module but based on the feedback of the total power at the DC bus. This requires only one pair of voltage and current measurements. The MPPT control problem for such topology of multi-string PV systems features a high input dimension, which can dramatically slow down the searching process for the real-time optimization process involved. The SPSA algorithm is considered in this study due to its remarkable capability of fast convergence for high dimensional search problems endorsed by various applications recently. Simulation study is performed for an 8-string PV system, and experimental study is performed for a 4-string PV system. Good performances are observed for both simulation and experimental results.

Sign in / Sign up

Export Citation Format

Share Document