scholarly journals Experimental Investigation and Passive Flow Control of a Cavitating Centrifugal Pump

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Spyridon D. Kyparissis ◽  
Dionissios P. Margaris

Passive flow control techniques are used to improve the flow field and efficiency of centrifugal pumps and turbomachines, in general. An important phenomenon that mechanical engineers have to take into account is cavitation. It leads to the decrease of the pump performance and total head. In the present experimental study, a centrifugal pump is investigated in cavitating conditions. A passive flow control is realized using three different blade leading edge angles in order to reduce the cavitation development and enhance the pump performance. The experiments are carried out in a pump test rig specially designed and constructed, along with the impellers. The head drop and total efficiency curves are presented in order to examine the effect of the blade leading edge angle on the cavitation and pump performance. Finally, the vapour distribution along with the blades is illustrated for the tested blade leading edge angles.

2020 ◽  
Vol 60 (5) ◽  
pp. 1135-1146
Author(s):  
Chen Rao ◽  
Hao Liu

Synopsis As a sophisticated micro device for noise reduction, the owl-inspired leading-edge (LE) serrations have been confirmed capable of achieving passive control of laminar-turbulent transition while normally paying a cost of lowering the aerodynamic performance in low Reynolds number (Re∼O[103]) regime. In order to explore potential applications of the owl-inspired serrated airfoils or blades in developing low noise wind turbines or multi-copters normally operating at higher Res, we conducted a large-eddy simulation (LES)-based study of Re effects on the aerodynamic performance of 2D clean and serrated models. Our results show that the LE serrations keep working effectively in mitigating turbulent fluctuations over a broad range of Re (O[103] ∼ O[105]), capable of achieving marked improvement in lift-to-drag ratio with increasing Res. As the aeroacoustic fields are in close association with the propagation of the turbulence sources, it is observed that the tradeoff between passive mitigation of turbulent fluctuations (hence aeroacoustic noise suppression) and aerodynamic performance can be noticeably mitigated at large angles of attack (AoAs) and at high Res. This indicates that the LE serrations present an alternative passive flow control mechanism at high Res through a straightforward local excitation of the flow transition while capable of mitigating the turbulent intensity passively. We further developed a 3D LES model of clean and partially serrated rectangular wings to investigate the effects of the LE serrations’ distribution on aerodynamic features, on the basis of the observation that longer serrations are often distributed intensively in the mid-span of real owl’s feathers. We find that the mid-span distributed LE serrations can facilitate the break-up of LE vortices and the turbulent transition passively and effectively while achieving a low level of turbulence kinetic energy over the upper suction surface of the wing.


2021 ◽  
Author(s):  
Anurag Bhattacharyya ◽  
Mark Bashkawi ◽  
Se Yeon Kim ◽  
Wanzheng Zheng ◽  
Theresa Saxton-Fox ◽  
...  

Author(s):  
Amr Abdelrahman ◽  
Amr Emam ◽  
Ihab Adam ◽  
Hamdy Hassan ◽  
Shinichi Ookawara ◽  
...  

Abstract Through the last two decades, many studies have demonstrated the ability of leading-edge protrusions (tubercles), inspired from the pectoral flippers of the humpback whale, to be an effective passive flow control method for the stall phase of an airfoil in some cases depending on the geometrical features and the flow regime. Nevertheless, there is a little work associated with revealing tubercles performance for the lifting surfaces with a highly cambered cross-section, used in numerous applications. The present work aims to investigate the effect of implementing leading edge tubercles on the performance of an infinite span rectangular wing with the highly cambered S1223 foil at different flow regimes. Two sets; baseline one and a modified with tubercles have been studied at Re = 0.1 × 106, 0.3 × 106 and 1.5 × 106 using computational fluid dynamics with a validated model. The numerical results demonstrated that Tubercles have the ability to entirely alter the flow structure over the airfoil, confining the separation to troughs, hence, softening the stall characteristics. However, the tubercle modification expedites the presence of the stalled flow over the suction side, lowering the stall angle for the three mentioned Reynolds numbers. While, no considerable difference occurs in lift and drag before the stall.


2021 ◽  
Author(s):  
Elena-Alexandra Chiulan ◽  
Costin Ioan Cosoiu ◽  
Andrei-Mugur Georgescu ◽  
Anton Anton ◽  
Mircea Degeratu

Sign in / Sign up

Export Citation Format

Share Document