scholarly journals Microbial Enhanced Heavy Oil Recovery by the Aid of Inhabitant Spore-Forming Bacteria: An Insight Review

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Biji Shibulal ◽  
Saif N. Al-Bahry ◽  
Yahya M. Al-Wahaibi ◽  
Abdulkader E. Elshafie ◽  
Ali S. Al-Bemani ◽  
...  

Crude oil is the major source of energy worldwide being exploited as a source of economy, including Oman. As the price of crude oil increases and crude oil reserves collapse, exploitation of oil resources in mature reservoirs is essential for meeting future energy demands. As conventional recovery methods currently used have become less efficient for the needs, there is a continuous demand of developing a new technology which helps in the upgradation of heavy crude oil. Microbial enhanced oil recovery (MEOR) is an important tertiary oil recovery method which is cost-effective and eco-friendly technology to drive the residual oil trapped in the reservoirs. The potential of microorganisms to degrade heavy crude oil to reduce viscosity is considered to be very effective in MEOR. Earlier studies of MEOR (1950s) were based on three broad areas: injection, dispersion, and propagation of microorganisms in petroleum reservoirs; selective degradation of oil components to improve flow characteristics; and production of metabolites by microorganisms and their effects. Since thermophilic spore-forming bacteria can thrive in very extreme conditions in oil reservoirs, they are the most suitable organisms for the purpose. This paper contains the review of work done with thermophilic spore-forming bacteria by different researchers.

Author(s):  
Seyed Amir Farzaneh ◽  
Riyaz Kharrat ◽  
Mohammad Hossein Ghazanfari

Micromodel is small-scale artificial model of porous medium which is known as a novel approach for simulating flow and transport in porous media. For better understanding the effect of fracture geometrical properties on oil recovery efficiency, a series of first contact miscible solvent injection process were conducted on horizontal glass micromodels at several fixed flow rate conditions. The micromodels were initially saturated with the heavy crude oil. The produced oil as a function of injected volume of solvents was measured using image analysis of the provided pictures. The concentration calibration curves of solvents in heavy crude oil were used for evaluating the solvents concentration. Several fractured and non-fractured quarter five-spot micromodels were generated by chemically etching process. The result of the experiments show that the produced oil decreased when the flow rate, fracture spacing, fracture discontinuity, fracture overlap, and fracture distribution were increased. In contrast, the produced oil increased, when the solvent viscosity, fracture orientation angles, fracture discontinuity-distribution and the number of fracture were increased. In addition, an optimum solvent composition is proposed.


Sign in / Sign up

Export Citation Format

Share Document