scholarly journals Accelerometer Sensor Specifications to Predict Hydrocarbon Using Passive Seismic Technique

2016 ◽  
Vol 2016 ◽  
pp. 1-28 ◽  
Author(s):  
M. H. Md Khir ◽  
Atul Kumar ◽  
Wan Ismail Wan Yusoff
Keyword(s):  
Oil And Gas ◽  
Optimal Solution ◽  
Seismic Energy ◽  
Oil And Gas Industry ◽  
Seismic Signal ◽  
Accelerometer Sensor ◽  
Low Frequencies ◽  
Technological Gap ◽  
Passive Seismic ◽  
Seismic Acquisition

The ambient seismic ground noise has been investigated in several surveys worldwide in the last 10 years to verify the correlation between observed seismic energy anomalies at the surface and the presence of hydrocarbon reserves beneath. This is due to the premise that anomalies provide information about the geology and potential presence of hydrocarbon. However a technology gap manifested in nonoptimal detection of seismic signals of interest is observed. This is due to the fact that available sensors are not designed on the basis of passive seismic signal attributes and mainly in terms of amplitude and bandwidth. This is because of that fact that passive seismic acquisition requires greater instrumentation sensitivity, noise immunity, and bandwidth, with active seismic acquisition, where vibratory or impulsive sources were utilized to receive reflections through geophones. Therefore, in the case of passive seismic acquisition, it is necessary to select the best monitoring equipment for its success or failure. Hence, concerning sensors performance, this paper highlights the technological gap and motivates developing dedicated sensors for optimal solution at lower frequencies. Thus, the improved passive seismic recording helps in oil and gas industry to perform better fracture mapping and identify more appropriate stratigraphy at low frequencies.

NEW DIRECTIONS IN GEOSCIENCE TECHNOLOGY FOR PETROLEUM EXPLORATION IN THE NEW AGE

1994 ◽  
Vol 34 (1) ◽  
pp. 189
Author(s):  
T. L. Burnett
Keyword(s):  
Oil And Gas ◽  
Regional Scale ◽  
Seismic Energy ◽  
Oil And Gas Industry ◽  
Transport Processes ◽  
Source Rocks ◽  
P Wave ◽  
Petroleum Exploration ◽  
S Wave ◽  
Seismic Acquisition

As economics of the oil and gas industry become more restrictive, the need for new means of improving exploration risks and reducing expenses is becoming more acute. Partnerships between industry and academia are making significant improvements in four general areas: Seismic acquisition, reservoir characterisation, quantitative structural modelling, and geochemical inversion.In marine seismic acquisition the vertical cable concept utilises hydrophones suspended at fixed locations vertically within the water column by buoys. There are numerous advantages of vertical cable technology over conventional 3-D seismic acquisition. In a related methodology, 'Borehole Seismic', seismic energy is passed between wells and valuable information on reservoir geometry, porosity, lithology, and oil saturation is extracted from the P-wave and S-wave data.In association with seismic methods of determining the external geometry and the internal properties of a reservoir, 3-dimensional sedimentation-simulation models, based on physical, hydrologic, erosional and transport processes, are being utilised for stratigraphic analysis. In addition, powerful, 1-D, coupled reaction-transport models are being used to simulate diagenesis processes in reservoir rocks.At the regional scale, the bridging of quantitative structural concepts with seismic interpretation has led to breakthroughs in structural analysis, particularly in complex terrains. Such analyses are becoming more accurate and cost effective when tied to highly advanced, remote-sensing, multi-spectral data acquisition and image processing technology. Emerging technology in petroleum geochemistry, enables geoscientists to infer the character, age, maturity, identity and location of source rocks from crude oil characteristics ('Geochemical Inversion') and to better estimate hydrocarbon-supply volumetrics. This can be invaluable in understanding petroleum systems and in reducing exploration risks and associated expenses.

Petroleum Exploration Risk Reduction Using New Geoscience Technology

1996 ◽  
Vol 14 (6) ◽  
pp. 507-534 ◽  
Author(s):  
T. L. Burnett
Keyword(s):  
Oil And Gas ◽  
Regional Scale ◽  
Seismic Energy ◽  
Oil And Gas Industry ◽  
Transport Processes ◽  
Source Rocks ◽  
P Wave ◽  
Petroleum Exploration ◽  
S Wave ◽  
Seismic Acquisition

As economics of the oil and gas industry become more restrictive, the need for new means of improving exploration risks and reducing expenses is becoming more acute. Partnerships between industry and academia are making significant improvements in four general areas: Seismic acquisition, reservoir characterization, quantitative structural modeling, and geochemical inversion. In marine seismic acquisition the vertical cable concept utilizes hydrophones suspended at fixed locations vertically within the water column by buoys. There are numerous advantages of vertical cable technology over conventional 3-D seismic acquisition. In a related methodology, ‘Borehole Seismic,’ seismic energy is passed between wells and valuable information on reservoir geometry, porosity, lithology, and oil saturation is extracted from the P-wave and S-wave data. In association with seismic methods of determining the external geometry and the internal properties of a reservoir, 3-dimensional sedimentation-simulation models, based on physical, hydrologic, erosional and transport processes, are being utilized for stratigraphic analysis. In addition, powerful, 1-D, coupled reaction-transport models are being used to simulate diagenesis processes in reservoir rocks. At the regional scale, the bridging of quantitative structural concepts with seismic interpretation has lead to breakthroughs in structural analysis, particularly in complex terrains. Such analyses are becoming more accurate and cost effective when tied to highly advanced, remote-sensing, multi-spectral data acquisition and image processing technology. Emerging technology in petroleum geochemistry enables geoscientists to infer the character, age, maturity, identity and location of source rocks from crude oil characteristics (‘Geochemical Inversion’) and to better estimate hydrocarbon-supply volumetrics, which can be invaluable in understanding petroleum systems and in reducing exploration risks and associated expenses.

Well Placement Technique and Production Optimization for Mature Field - A Case Study of L-X Field

2020 ◽  
Vol 46 ◽  
pp. 168-179
Author(s):  
Patrick Nwafor ◽  
Kelani Bello
Keyword(s):  
Oil And Gas ◽  
Optimization Technique ◽  
Optimal Solution ◽  
Oil And Gas Industry ◽  
Optimization Method ◽  
Simulation Software ◽  
Production Optimization ◽  
Direct Optimization ◽  
Well Placement ◽  
Local Optimal Solution

A Well placement is a well-known technique in the oil and gas industry for production optimization and are generally classified into local and global methods. The use of simulation software often deployed under the direct optimization technique called global method. The production optimization of L-X field which is at primary recovery stage having five producing wells was the focus of this work. The attempt was to optimize L-X field using a well placement technique.The local methods are generally very efficient and require only a few forward simulations but can get stuck in a local optimal solution. The global methods avoid this problem but require many forward simulations. With the availability of simulator software, such problem can be reduced thus using the direct optimization method. After optimization an increase in recovery factor of over 20% was achieved. The results provided an improvement when compared with other existing methods from the literatures.

Rigorous Integrated Evolutionary Workflow for Optimal Exploitation of Unconventional Gas Assets

2017 ◽  
Vol 6 (1) ◽  
pp. 101-122 ◽  
Author(s):  
Tatyana Plaksina ◽  
Eduardo Gildin
Keyword(s):  
Oil And Gas ◽  
Optimal Solution ◽  
Oil And Gas Industry ◽  
Global Optimum ◽  
Optimal Number ◽  
Test Cases ◽  
Unconventional Gas ◽  
Gas Industry ◽  
Practical Applications ◽  
Mixed Optimization

Applications of stochastic evolutionary algorithms in engineering are gaining more attention in practical applications in the oil and gas industry. An important factor to consider when implementing stochastic algorithms is its ability to find the global optimum efficiently. In this study the authors formulate, implement, and test a genetic algorithm with strong elitism to solve a critical problem in the upstream oil industry: how to develop economically an unconventional gas asset. This problem involves finding the optimal number of horizontal wells, the number of transverse hydraulic fracture stages along them, and stage half-length. The described problem is inherently discrete or mixed optimization problem for which the authors develop a conceptually new evolutionary integrated framework that addresses all production design questions. They outline the range of applicability of their workflow and provide ample test cases and results. Their rigorous formulation performs well for a given problem statement and finds the optimal solution that is consistent with the industry accepted optimum.

Visualisation and delineation techniques adopted from other industries to increase productivity of the G&G work in the oil and gas industry

2015 ◽  
Vol 55 (2) ◽  
pp. 475
Author(s):  
Adrien Bisset ◽  
Christopher Han
Keyword(s):  
Seismic Data ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Frequency Decomposition ◽  
Knowing That ◽  
Seismic Acquisition ◽  
Decision Making Processes ◽  
Increase Productivity ◽  
Human Interpretation

Given the recent increase of seismic data quality owing to improvements in seismic acquisition and processing, it is surprising to realise that the oil and gas industry is still using standard desktop screens with 256 colour resolution software displays, and for most of the seismic representations, using only three types of colour bars (peak-trough, grey scale or rainbow) for human interpretation, comprehension and decision making processes. Knowing that these displays show 0.000006% of the details captured in 32 bit resolution data, it is a wonder: is the oil and gas industry using the available data to its maximum potential to decrease the risk of drilling dry wells? Astronomy and medical imaging tackled these issues long ago and inspired by them, the oil and gas industry is able to use a 24 bit colour space for representing seismic data in a more appealing way. These innovative seismic data representations are called colour blends and are created using sources such as frequency decomposition products, angle stacks, edge attributes, 4D vintages or any other seismic attributes colour-coded with primary colours. Colour blends have not yet become mainstream due to availability of the tools. The cognitive cybernetics approach allows a more balanced input between data driven processes, interpreter skills and guidance, and has recently been made available for use with colour blends—a breakthrough in interpretation. This extended abstract shows recent advances in these two techniques and how they benefit to the geological and geophysical work based on a case study from the Australian and New Zealand sector.

scholarly journals Optimization of Crude Oil Transfer by Trucking Services with Agent Based Modelling

TEM Journal ◽  
2021 ◽  
pp. 1423-1428
Author(s):  
Nurma Amelia ◽  
Ferliadi F ◽  
Avid Christa ◽  
Fergyanto E Gunawan ◽  
Muhammad Asrol
Keyword(s):  
Crude Oil ◽  
Oil And Gas ◽  
Optimal Solution ◽  
Transportation Cost ◽  
Oil And Gas Industry ◽  
Simulation Modelling ◽  
Optimal Solutions ◽  
Gas Industry ◽  
Agent Based ◽  
Agent Based Modelling

Transportation and distributions network hold an important role to maintain business stability in oil and gas industry. In this work, the simulation modelling to optimize the transportation is proposed for the oil and gas company. An agent-based modelling is developed to find the optimal solutions. Two route alternatives of the transportation were found as the constraint of the model. The result showed that the simulations model enabled to find the number of the truck to operate as the optimal transportation solution. The simulation model demonstrated that the route 2 provided the optimal solution in minimizing transportation cost and maximized the number of distributed crude oil.

Dual wavefields from distributed acoustic sensing measurements

Geophysics ◽  
2016 ◽  
Vol 81 (6) ◽  
pp. D585-D597 ◽  
Author(s):  
Flavio Poletto ◽  
Daniel Finfer ◽  
Piero Corubolo ◽  
Biancamaria Farina
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Axial Direction ◽  
Borehole Data ◽  
Directional Information ◽  
Native Strain ◽  
Acoustic Sensing ◽  
Wavefield Separation ◽  
Seismic Acquisition ◽  
Distributed Acoustic Sensing

Distributed acoustic sensing (DAS) using fiber optic cables is an emerging seismic acquisition technology for the oil and gas industry, geothermal resource exploration, and underground fluid-storage monitoring. This technology offers the advantage of improving seismic acquisition by enabling massive arrays for monitoring of seismic wavefields at reduced cost with respect to conventional methods. In general, it is accepted that this method provides acoustic signals comparable with conventional seismic data, however, without the multicomponent directional information typical of geophones. We have developed a modified data extraction method and found that, as a result of the dense spatial distribution of recording points along the optic cable, DAS can provide two linked wavefield components in the axial direction, even when using a single 1D cable line. These signal pairs consist of dual components that are related to native strain rate (or strain) and particle acceleration (or velocity) fields at a given recording location. These dual signals are easily usable for wavefield separation purposes simply performing a trace-by-trace combination by appropriate scaling coefficient. The analysis performed with borehole data from linear and helically wound cables demonstrates the effectiveness of polarity recovery and dual-wavefield separation. We show real examples in which the data can be combined to provide separation of up- and downgoing wavefields. The ratio of the dual components provides information on local slowness properties in the formation.

scholarly journals Optimized Characterization of Gas Chimneys Based on Special Seismic Processing

2019 ◽  
Vol 37 (4) ◽  
Author(s):  
José Paulo Goulart ◽  
David Castro ◽  
Wander Amorim
Keyword(s):  
Seismic Data ◽  
Seismic Signal ◽  
Low Frequencies ◽  
Important Indicator ◽  
Seismic Processing ◽  
Gas Chimney ◽  
Seismic Acquisition ◽  
Seismic Sections ◽  
Gas Chimneys ◽  
Parnaíba Basin

ABSTRACT A new computational methodology was developed to facilitate the interpretation of gas chimneys in seismic sections by analyzing the frequency spectrum of the seismic signal in the Hilbert Domain. Gas chimneys are structures associated with the migration of hydrocarbons or free gas, causing vertical chaotic disturbances in the seismic data. Its occurrence in oil reservoirs is considered an important indicator of the presence of an active petroleum system and its mapping is useful to reduce exploratory risks, increasing the probability of success of the pioneer wells. Standard seismic processing does not favor the recognition of gas chimneys, since their characteristic seismic signature is treated as noise and the low frequencies are strongly attenuated already in the period of the seismic acquisition. The set of reflections is calculated to enhance the low frequencies, making the gas chimneys easily identifiable in the seismic sections where they were not previously even perceived. The special processing flow was applied to seismic data from the Parnaíba Basin “(NE Brazil). This Paleozoic basin is especially rich in gas chimneys, which were favored by transcurrent tectonics associated with the Transbrasiliano Lineament. The gas chimneys interpretation could be validated by the observation of correlated seismic, topographic and geochemical features.KEYWORDS: special processing, gas chimney, exploratory risk, Parnaíba Basin. RESUMO. Uma nova metodologia computacional foi desenvolvida para facilitar a interpretação de chaminés de gás em seções sísmicas por meio da análise do espectro de frequência do sinal sísmico no Domínio de Hilbert. Chaminés de gás são estruturas associadas à migração de hidrocarbonetos ou gás livre, provocando perturbações caóticas verticais no dado sísmico. Sua ocorrência em reservatórios petrolíferos é considerada um importante indicador da presença de um sistema petrolífero ativo e seu mapeamento é útil para reduzir os riscos exploratórios, aumentando a probabilidade de sucesso dos poços pioneiros. O processamento sísmico padrão não favorece o reconhecimento das chaminés de gás, uma vez que a sua assinatura sísmica característica é tratada como ruído e as baixas frequências são fortemente atenuadas já no período da aquisição sísmica. O conjunto de reflexões é calculado para realçar as baixas frequências, tornando as chaminés de gás facilmente identificáveis nas seções sísmicas onde antes não eram nem percebidas. O processamento especial foi aplicado em dados sísmicos da Bacia do Parnaíba. Esta bacia paleozoica é especialmente rica em chaminés de gás, cuja presença foi favorecida pela tectônica transcorrente associada ao Lineamento Transbrasiliano. As chaminés de gás interpretadas puderam também ser validadas pela observação de feições sísmicas, topográficas e geoquímicas correlatas.Palavras-chave: processamento especial, chaminé de gás, risco exploratório, Bacia do Parnaíba.

Seismic data acquisition—The new millennium

Geophysics ◽  
2001 ◽  
Vol 66 (1) ◽  
pp. 54-54 ◽  
Author(s):  
Steve Roche
Keyword(s):  
Data Acquisition ◽  
Seismic Data ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Seismic Acquisition ◽  
Seismic Data Acquisition ◽  
New Millennium

As we enter the new millennium, seismic data acquisition is in an interesting position. Because of overcapacity of seismic acquisition crews related to the downturn in the oil and gas industry, acquisition technology is essentially “frozen” in place. Companies previously active in seismic data acquisition research have limited these activities, or eliminated them. Some advances related to improving the resolution of seismic data through improved acquisition methods are being made, but much more effort is being directed towards improving the efficiency of acquisition.

Sign in / Sign up

Export Citation Format

Share Document