scholarly journals Cross-Layer QoS Scheme Based on Priority Differentiation in Multihop Wireless Networks

2017 ◽  
Vol 2017 ◽  
pp. 1-12
Author(s):  
Mingjiu Wang ◽  
Shu Fan

To support different QoS requirements of diverse types of services, a cross-layer QoS scheme providing different QoS guarantees is designed. This scheme sets values of service priorities according to services’ data arrival rates and required end-to-end delay to endow different services with diverse scheduling priorities. To support QoS requirements better and maintain fairness, this scheme introduces delay and throughput weight coefficients. The methods of calculating the coefficients are also proposed. Through decomposing the optimization problem that uses weighted network utility as its optimization objective using Lyapunov optimization technique, this scheme can simultaneously support different QoS requirements of various services. The throughput utility optimality of the scheme is also proved. To reduce the computational complexity of the scheme, a distributed media access control scheme is proposed. A power control algorithm for this cross-layer scheme is also designed, and this algorithm transforms the power control into the solution of a multivariate equation. The simulation results evaluated with Matlab show that, compared with the existing works, the algorithm presented in this paper can simultaneously satisfy the delay demands of different services with maintaining high throughput.

Algorithms ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 68 ◽  
Author(s):  
Shu Fan

There are two main challenges in wireless multimedia sensors networks: energy constraints and providing DiffServ. In this paper, a joint flow control, routing, scheduling, and power control scheme based on a Lyapunov optimization framework is proposed to increase network lifetime and scheduling fairness. For an adaptive distribution of transmission opportunities, a differentiated queueing services (DQS) scheme is adopted for maintaining data queues. In the Lyapunov function, different types of queues are normalized for a unified dimension. To prolong network lifetime, control coefficients are designed according to the characteristics of the wireless sensor networks. The power control problem is proved to be a convex optimization problem and two optimal algorithms are discussed. Simulation results show that, compared with existing schemes, the proposed scheme can achieve a better trade-off between QoS performances and network lifetime. The simulation results also show that the scheme utilizing the distributed media access control scheme in scheduling performs best in the transmission of real-time services.


2021 ◽  
Author(s):  
◽  
Seyed Nekooei

<p>Over the past decade, advances in electronics, computer science, and wireless technologies have facilitated the rapid development of Wireless Body Area Networks (WBANs). WBANs consist of various sensors that are attached on or even implanted in the human body to improve health care and the quality of life. WBANs must provide high-quality communication in terms of both reliability and performance, in order to bring timely medical help to patients. Commonly used communication standard in WBANs is IEEE 802.15.4. However, due to poor channel quality in WBANs, this standard is limited in reliability and performance. To address this issue, cross-layer techniques for Media Access Control (MAC) have attracted substantial research attention in recent years.  Aimed at developing cross-layer MAC technologies, Fuzzy Logic Controllers (FLCs) have been widely utilised to effectively and efficiently process information from different layers in WBANs. However, existing FLCs have mostly focused on improving communication reliability while ignoring the importance of network performance.  To improve both the reliability and performance of MAC protocols in WBANs, this thesis introduces a new design of cross-layer FLC, called Cross-Layer Fuzzy logic based Backoff system (CLFB), to improve reliability by reducing the collision rate and increasing the packet delivery ratio. CLFB can also enhance the network performance in terms of throughput in WBANs while maintaining packet delays at a reasonable level by considering both channel condition and application requirements. Through the proper use of FLCs as an extension of the standard exponential back-off algorithms, CLFB is experimentally shown to achieve a high level of adaptability.  This thesis also proposes an evolutionary approach to automate the design of FLCs for CLFB in WBANs. With the goal of improving network reliability while keeping the communication delay at a low level, we have particularly studied the usefulness of three coding schemes with different levels of flexibility, which enables us to represent alternative design of FLCs as candidate solutions in evolutionary algorithms. The influence of fitness functions that measure the effectiveness of each possible FLC design has also been examined carefully in order to identify useful FLCs. Moreover, we have utilised surrogate models to improve the efficiency of the design process. In consideration of practical usefulness, we have further identified two main design targets. The first target is to design effective FLCs for a specific network configuration. The second target covers a wide range of network settings. In order to examine the usefulness of our design approach, we have utilised and experimentally evaluated two popularly used evolutionary algorithms, i.e. Particle Swarm Optimisation (PSO) and Differential Evolution (DE).  This thesis finally proposes a two-level control scheme at both the sensor level and the coordinator level to further improve communication quality in WBANs. The sensor-level FLC controls contention based channel access and the coordinator-level FLC controls contention free channel access. This two-level FLC architecture can effectively enhance the cooperation between sensors and the coordinator such that both the reliability and performance of the network can be significantly improved. We also studied the use of cooperative coevolutionary approach to automate the design of our twolevel control scheme. With the goal of effectively designing useful FLCs, we have particularly investigated different collaborator selection methods for our cooperative coevolutionary approach, which enable us to effectively select collaborators while evaluating the candidate FLC design in each sub-population. Specifically, we show that network knowledge can help our evolutionary design approach to select collaborators more effectively.</p>


2021 ◽  
Author(s):  
◽  
Seyed Nekooei

<p>Over the past decade, advances in electronics, computer science, and wireless technologies have facilitated the rapid development of Wireless Body Area Networks (WBANs). WBANs consist of various sensors that are attached on or even implanted in the human body to improve health care and the quality of life. WBANs must provide high-quality communication in terms of both reliability and performance, in order to bring timely medical help to patients. Commonly used communication standard in WBANs is IEEE 802.15.4. However, due to poor channel quality in WBANs, this standard is limited in reliability and performance. To address this issue, cross-layer techniques for Media Access Control (MAC) have attracted substantial research attention in recent years.  Aimed at developing cross-layer MAC technologies, Fuzzy Logic Controllers (FLCs) have been widely utilised to effectively and efficiently process information from different layers in WBANs. However, existing FLCs have mostly focused on improving communication reliability while ignoring the importance of network performance.  To improve both the reliability and performance of MAC protocols in WBANs, this thesis introduces a new design of cross-layer FLC, called Cross-Layer Fuzzy logic based Backoff system (CLFB), to improve reliability by reducing the collision rate and increasing the packet delivery ratio. CLFB can also enhance the network performance in terms of throughput in WBANs while maintaining packet delays at a reasonable level by considering both channel condition and application requirements. Through the proper use of FLCs as an extension of the standard exponential back-off algorithms, CLFB is experimentally shown to achieve a high level of adaptability.  This thesis also proposes an evolutionary approach to automate the design of FLCs for CLFB in WBANs. With the goal of improving network reliability while keeping the communication delay at a low level, we have particularly studied the usefulness of three coding schemes with different levels of flexibility, which enables us to represent alternative design of FLCs as candidate solutions in evolutionary algorithms. The influence of fitness functions that measure the effectiveness of each possible FLC design has also been examined carefully in order to identify useful FLCs. Moreover, we have utilised surrogate models to improve the efficiency of the design process. In consideration of practical usefulness, we have further identified two main design targets. The first target is to design effective FLCs for a specific network configuration. The second target covers a wide range of network settings. In order to examine the usefulness of our design approach, we have utilised and experimentally evaluated two popularly used evolutionary algorithms, i.e. Particle Swarm Optimisation (PSO) and Differential Evolution (DE).  This thesis finally proposes a two-level control scheme at both the sensor level and the coordinator level to further improve communication quality in WBANs. The sensor-level FLC controls contention based channel access and the coordinator-level FLC controls contention free channel access. This two-level FLC architecture can effectively enhance the cooperation between sensors and the coordinator such that both the reliability and performance of the network can be significantly improved. We also studied the use of cooperative coevolutionary approach to automate the design of our twolevel control scheme. With the goal of effectively designing useful FLCs, we have particularly investigated different collaborator selection methods for our cooperative coevolutionary approach, which enable us to effectively select collaborators while evaluating the candidate FLC design in each sub-population. Specifically, we show that network knowledge can help our evolutionary design approach to select collaborators more effectively.</p>


Sign in / Sign up

Export Citation Format

Share Document