scholarly journals An Interference-Aware Rate and Channel Adaptation Scheme for Dense IEEE 802.11n Networks

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Tingpei Huang ◽  
Shibao Li ◽  
Xiaoxuan Lu ◽  
Shaoshu Gao

Rate adaptation, which dynamically chooses transmission rate provided at the physical layer according to the current channel conditions, is a fundamental resource management issue in IEEE 802.11 networks with the goal of maximizing the network throughput. Traditional rate adaptation algorithms for IEEE 802.11n networks do not consider the interference problem, which becomes much more serious due to the rapid deployment of IEEE 802.11n devices and large number of mobile terminals. In this paper, an interference-aware rate and channel adaptation scheme RaCA for intensive IEEE 802.11n networks was proposed. Firstly, RaCA leverages RSSI and CSI information together to measure the current channel conditions at the receiver side. RSSI is a coarse-grained indicator and CSI is a fine-grained indicator. Secondly, a two-stage rate adaptation scheme TSRA was designed, which can quickly adapt to optimal bit rate based on RSSI and CSI information. Finally, a quorum-based channel adaptation algorithm QCA was proposed, which does not need control channel. If channel suffers severe interferences, RaCA calls QCA to choose another channel to work on. Simulation and testbed implementation results demonstrate that RaCA achieves significant throughput gain over SampleLite and Minstrel-HT.

Author(s):  
Teuku Yuliar Arif ◽  
Munandar Munandar ◽  
Ramzi Adriman ◽  
Rizal Munadi

The wireless mesh network (WMN) is a future network technology that develops single-hop wireless local area networks (WLANs) into multi-hop wireless mesh networks, based on the IEEE 802.11s standard. However, this development still presents many challenges, such as determining the best route between sources and destinations, especially taking into account the use of the medium access control (MAC) and physical (PHY) layers of IEEE 802.11n/ac. Some papers have proposed rate adaptation algorithms particularly for single-hop networks; however, these only focused on mechanisms to find data rates suitable for channel conditions. In IEEE 802.11s WMNs, the design of the rate adaptation algorithm is more challenging. Besides considering the problem of channel quality and optimal throughput, it is necessary to also consider the problem of collision and the best route. It is important to take collision into account because the collision probability in multi-hop mesh networks is higher than that in single-hop networks and can lead to a lower throughput. Rate adaptation algorithms for IEEE 802.11s WMNs have been proposed in other papers, but they also do not consider the use of the MAC and PHY layers of IEEE 802.11n/ac. In this paper, we propose the collision-aware rate adaptation for optimal high-throughput (CARA-OHT) algorithm for WMN IEEE 802.11s. An evaluation through the extensive use of a network NS-3 simulator shows that the proposed algorithm exhibits a higher throughput than previously developed algorithms.


2021 ◽  
Author(s):  
◽  
Dong Xia

<p>IEEE 802.11 technology provides a low-cost wireless networking solution. In the last few years, we have seen that the demand for high-bandwidth wireless local area networks increases rapidly, due to the proliferation of mobile devices such as laptops, smart phones and tablet PCs. This has driven the widespread deployment of IEEE 802.11 wireless networks to provide Internet access. However, wireless networks present their own unique problems. Wireless channel is extremely variable and can be affected by a number of different factors, such as collisions, multipath fading and signal attenuation. As such, rate adaptation algorithm is a key component of IEEE 802.11 standard which is used to vary the transmission data rate to match the wireless channel conditions, in order to achieve the best possible performance. Rate adaptation algorithm studies and evaluations are always hot research topics. However, despite its popularity, little work has been done on evaluating the performance of rate adaptation algorithms by comparing the throughput of the algorithm with the throughput of the fixed rates. This thesis presents an experimental study that compares the performance ofMikroTik rate adaptation algorithm andMinstrel rate adaptation algorithm against fixed rates in an IEEE 802.11g network. MikroTik and Minstrel rate adaptation algorithm are most commonly used algorithm around the world. All experiments are conducted in a real world environment in this thesis. In a real world environment, wireless channel conditions are not tightly being controlled, and it is extremely vulnerable to interference of surrounding environment. The dynamic changes of wireless channel conditions have a considerable effect on the performance of rate adaptation algorithms. The main challenge of evaluating a rate adaptation algorithm in a real world environment is getting different experiment behaviours from the same experiment. Experiment results may indicate many different behaviours which due to the leak of wireless environment controlling. Having a final conclusion from those experiment results can be a challenge task. In order to perform a comprehensive rate adaptation algorithm evaluation. All experiments run 20 times for 60 seconds. The average result and stand deviation is calculated. We also design and implement an automation experiment controlling program to help us maintain that each run of experiment is following exactly the same procedures. In MikroTik rate adaptation algorithm evaluation, the results show in many cases that fixed rate outperforms rate adaptation. Our findings raise questions regarding the suitability of the adopted rate adaptation algorithm in typical indoor environments. Furthermore, our study indicates that it is not wise to simply ignore fixed rate. A fine selection of a fixed rate could be made to achieve desired performance. The result ofMinstrel rate adaptation evaluation show that whilst Minstrel performs reasonably well in static wireless channel conditions, in some cases the algorithm has difficulty selecting the optimal data rate in the presence of dynamic channel conditions. In addition, Minstrel performs well when the channel condition improves frombad quality to good quality. However, Minstrel has trouble selecting the optimal rate when the channel condition deteriorates from good quality to bad quality. By comparing the experimental results between the performance of rate adaptation algorithms and the performance of fixed data rate against different factors, the experiment results directly pointed out the weakness of these two rate adaptation algorithms. Our findings from both experiments provide useful information on the design of rate adaptation algorithms.</p>


2021 ◽  
Author(s):  
◽  
Dong Xia

<p>IEEE 802.11 technology provides a low-cost wireless networking solution. In the last few years, we have seen that the demand for high-bandwidth wireless local area networks increases rapidly, due to the proliferation of mobile devices such as laptops, smart phones and tablet PCs. This has driven the widespread deployment of IEEE 802.11 wireless networks to provide Internet access. However, wireless networks present their own unique problems. Wireless channel is extremely variable and can be affected by a number of different factors, such as collisions, multipath fading and signal attenuation. As such, rate adaptation algorithm is a key component of IEEE 802.11 standard which is used to vary the transmission data rate to match the wireless channel conditions, in order to achieve the best possible performance. Rate adaptation algorithm studies and evaluations are always hot research topics. However, despite its popularity, little work has been done on evaluating the performance of rate adaptation algorithms by comparing the throughput of the algorithm with the throughput of the fixed rates. This thesis presents an experimental study that compares the performance ofMikroTik rate adaptation algorithm andMinstrel rate adaptation algorithm against fixed rates in an IEEE 802.11g network. MikroTik and Minstrel rate adaptation algorithm are most commonly used algorithm around the world. All experiments are conducted in a real world environment in this thesis. In a real world environment, wireless channel conditions are not tightly being controlled, and it is extremely vulnerable to interference of surrounding environment. The dynamic changes of wireless channel conditions have a considerable effect on the performance of rate adaptation algorithms. The main challenge of evaluating a rate adaptation algorithm in a real world environment is getting different experiment behaviours from the same experiment. Experiment results may indicate many different behaviours which due to the leak of wireless environment controlling. Having a final conclusion from those experiment results can be a challenge task. In order to perform a comprehensive rate adaptation algorithm evaluation. All experiments run 20 times for 60 seconds. The average result and stand deviation is calculated. We also design and implement an automation experiment controlling program to help us maintain that each run of experiment is following exactly the same procedures. In MikroTik rate adaptation algorithm evaluation, the results show in many cases that fixed rate outperforms rate adaptation. Our findings raise questions regarding the suitability of the adopted rate adaptation algorithm in typical indoor environments. Furthermore, our study indicates that it is not wise to simply ignore fixed rate. A fine selection of a fixed rate could be made to achieve desired performance. The result ofMinstrel rate adaptation evaluation show that whilst Minstrel performs reasonably well in static wireless channel conditions, in some cases the algorithm has difficulty selecting the optimal data rate in the presence of dynamic channel conditions. In addition, Minstrel performs well when the channel condition improves frombad quality to good quality. However, Minstrel has trouble selecting the optimal rate when the channel condition deteriorates from good quality to bad quality. By comparing the experimental results between the performance of rate adaptation algorithms and the performance of fixed data rate against different factors, the experiment results directly pointed out the weakness of these two rate adaptation algorithms. Our findings from both experiments provide useful information on the design of rate adaptation algorithms.</p>


Author(s):  
Wang Zheng-fang ◽  
Z.F. Wang

The main purpose of this study highlights on the evaluation of chloride SCC resistance of the material,duplex stainless steel,OOCr18Ni5Mo3Si2 (18-5Mo) and its welded coarse grained zone(CGZ).18-5Mo is a dual phases (A+F) stainless steel with yield strength:512N/mm2 .The proportion of secondary Phase(A phase) accounts for 30-35% of the total with fine grained and homogeneously distributed A and F phases(Fig.1).After being welded by a specific welding thermal cycle to the material,i.e. Tmax=1350°C and t8/5=20s,microstructure may change from fine grained morphology to coarse grained morphology and from homogeneously distributed of A phase to a concentration of A phase(Fig.2).Meanwhile,the proportion of A phase reduced from 35% to 5-10°o.For this reason it is known as welded coarse grained zone(CGZ).In association with difference of microstructure between base metal and welded CGZ,so chloride SCC resistance also differ from each other.Test procedures:Constant load tensile test(CLTT) were performed for recording Esce-t curve by which corrosion cracking growth can be described, tf,fractured time,can also be recorded by the test which is taken as a electrochemical behavior and mechanical property for SCC resistance evaluation. Test environment:143°C boiling 42%MgCl2 solution is used.Besides, micro analysis were conducted with light microscopy(LM),SEM,TEM,and Auger energy spectrum(AES) so as to reveal the correlation between the data generated by the CLTT results and micro analysis.


Sign in / Sign up

Export Citation Format

Share Document