scholarly journals Deep Convolutional Neural Networks-Based Automatic Breast Segmentation and Mass Detection in DCE-MRI

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Han Jiao ◽  
Xinhua Jiang ◽  
Zhiyong Pang ◽  
Xiaofeng Lin ◽  
Yihua Huang ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Convolutional Neural Networks ◽  
False Positives ◽  
Mass Detection ◽  
Deep Convolutional Neural Networks ◽  
Region Segmentation ◽  
Dce Mri ◽  
Breast Segmentation

Breast segmentation and mass detection in medical images are important for diagnosis and treatment follow-up. Automation of these challenging tasks can assist radiologists by reducing the high manual workload of breast cancer analysis. In this paper, deep convolutional neural networks (DCNN) were employed for breast segmentation and mass detection in dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI). First, the region of the breasts was segmented from the remaining body parts by building a fully convolutional neural network based on U-Net++. Using the method of deep learning to extract the target area can help to reduce the interference external to the breast. Second, a faster region with convolutional neural network (Faster RCNN) was used for mass detection on segmented breast images. The dataset of DCE-MRI used in this study was obtained from 75 patients, and a 5-fold cross validation method was adopted. The statistical analysis of breast region segmentation was carried out by computing the Dice similarity coefficient (DSC), Jaccard coefficient, and segmentation sensitivity. For validation of breast mass detection, the sensitivity with the number of false positives per case was computed and analyzed. The Dice and Jaccard coefficients and the segmentation sensitivity value for breast region segmentation were 0.951, 0.908, and 0.948, respectively, which were better than those of the original U-Net algorithm, and the average sensitivity for mass detection achieved 0.874 with 3.4 false positives per case.

scholarly journals Document Localization in Images Taken by Smartphones Using a Fully Convolutional Neural Network

2021 ◽  
Author(s):  
Shima Baniadamdizaj ◽  
Mohammadreza Soheili ◽  
Azadeh Mansouri
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Convolutional Neural Networks ◽  
Deep Convolutional Neural Networks ◽  
Opposite Hand ◽  
Processing Strategies ◽  
Document Localization

Abstract Today integration of facts from virtual and paper files may be very vital for the expertise control of efficient. This calls for the record to be localized at the photograph. Several strategies had been proposed to resolve this trouble; however, they may be primarily based totally on conventional photograph processing strategies that aren't sturdy to intense viewpoints and backgrounds. Deep Convolutional Neural Networks (CNNs), on the opposite hand, have demonstrated to be extraordinarily sturdy to versions in history and viewing attitude for item detection and classification responsibilities. We endorse new utilization of Neural Networks (NNs) for the localization trouble as a localization trouble. The proposed technique ought to even localize photos that don't have a very square shape. Also, we used a newly accrued dataset that has extra tough responsibilities internal and is in the direction of a slipshod user. The end result knowledgeable in 3 exclusive classes of photos and our proposed technique has 83% on average. The end result is as compared with the maximum famous record localization strategies and cell applications.

Application of convolutional neural networks for monitoring of marine objects

2020 ◽  
pp. 53-61
Author(s):  
Н.А. Полковникова ◽  
Е.В. Тузинкевич ◽  
А.Н. Попов
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Computer Vision ◽  
Convolutional Neural Network ◽  
Convolutional Neural Networks ◽  
Network Architecture ◽  
Research Process ◽  
Probability Of Detection ◽  
Neural Network Architecture ◽  
Deep Convolutional Neural Networks

В статье рассмотрены технологии компьютерного зрения на основе глубоких свёрточных нейронных сетей. Применение нейронных сетей особенно эффективно для решения трудно формализуемых задач. Разработана архитектура свёрточной нейронной сети применительно к задаче распознавания и классификации морских объектов на изображениях. В ходе исследования выполнен ретроспективный анализ технологий компьютерного зрения и выявлен ряд проблем, связанных с применением нейронных сетей: «исчезающий» градиент, переобучение и вычислительная сложность. При разработке архитектуры нейросети предложено использовать функцию активации RELU, обучение некоторых случайно выбранных нейронов и нормализацию с целью упрощения архитектуры нейросети. Сравнение используемых в нейросети функций активации ReLU, LeakyReLU, Exponential ReLU и SOFTMAX выполнено в среде Matlab R2020a. На основе свёрточной нейронной сети разработана программа на языке программирования Visual C# в среде MS Visual Studio для распознавания морских объектов. Программапредназначена для автоматизированной идентификации морских объектов, производит детектирование (нахождение объектов на изображении) и распознавание объектов с высокой вероятностью обнаружения. The article considers computer vision technologies based on deep convolutional neural networks. Application of neural networks is particularly effective for solving difficult formalized problems. As a result convolutional neural network architecture to the problem of recognition and classification of marine objects on images is implemented. In the research process a retrospective analysis of computer vision technologies was performed and a number of problems associated with the use of neural networks were identified: vanishing gradient, overfitting and computational complexity. To solve these problems in neural network architecture development, it was proposed to use RELU activation function, training some randomly selected neurons and normalization for simplification of neural network architecture. Comparison of ReLU, LeakyReLU, Exponential ReLU, and SOFTMAX activation functions used in the neural network implemented in Matlab R2020a.The computer program based on convolutional neural network for marine objects recognition implemented in Visual C# programming language in MS Visual Studio integrated development environment. The program is designed for automated identification of marine objects, produces detection (i.e., presence of objects on image), and objects recognition with high probability of detection.

scholarly journals Facial Expressions Recognition for Human–Robot Interaction Using Deep Convolutional Neural Networks with Rectified Adam Optimizer

Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2393 ◽  
Author(s):  
Daniel Octavian Melinte ◽  
Luige Vladareanu
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Emotion Recognition ◽  
Convolutional Neural Networks ◽  
Human Robot Interaction ◽  
Fine Tuning ◽  
Visual Object ◽  
Single Shot ◽  
Deep Convolutional Neural Networks

The interaction between humans and an NAO robot using deep convolutional neural networks (CNN) is presented in this paper based on an innovative end-to-end pipeline method that applies two optimized CNNs, one for face recognition (FR) and another one for the facial expression recognition (FER) in order to obtain real-time inference speed for the entire process. Two different models for FR are considered, one known to be very accurate, but has low inference speed (faster region-based convolutional neural network), and one that is not as accurate but has high inference speed (single shot detector convolutional neural network). For emotion recognition transfer learning and fine-tuning of three CNN models (VGG, Inception V3 and ResNet) has been used. The overall results show that single shot detector convolutional neural network (SSD CNN) and faster region-based convolutional neural network (Faster R-CNN) models for face detection share almost the same accuracy: 97.8% for Faster R-CNN on PASCAL visual object classes (PASCAL VOCs) evaluation metrics and 97.42% for SSD Inception. In terms of FER, ResNet obtained the highest training accuracy (90.14%), while the visual geometry group (VGG) network had 87% accuracy and Inception V3 reached 81%. The results show improvements over 10% when using two serialized CNN, instead of using only the FER CNN, while the recent optimization model, called rectified adaptive moment optimization (RAdam), lead to a better generalization and accuracy improvement of 3%-4% on each emotion recognition CNN.

Small aircraft detection using deep learning

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Emre Kiyak ◽  
Gulay Unal
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Deep Learning ◽  
Convolutional Neural Network ◽  
Transfer Learning ◽  
Convolutional Neural Networks ◽  
Fine Tuning ◽  
Deep Convolutional Neural Networks ◽  
Content Type ◽  
Training Time

Purpose The paper aims to address the tracking algorithm based on deep learning and four deep learning tracking models developed. They compared with each other to prevent collision and to obtain target tracking in autonomous aircraft. Design/methodology/approach First, to follow the visual target, the detection methods were used and then the tracking methods were examined. Here, four models (deep convolutional neural networks (DCNN), deep convolutional neural networks with fine-tuning (DCNNFN), transfer learning with deep convolutional neural network (TLDCNN) and fine-tuning deep convolutional neural network with transfer learning (FNDCNNTL)) were developed. Findings The training time of DCNN took 9 min 33 s, while the accuracy percentage was calculated as 84%. In DCNNFN, the training time of the network was calculated as 4 min 26 s and the accuracy percentage was 91%. The training of TLDCNN) took 34 min and 49 s and the accuracy percentage was calculated as 95%. With FNDCNNTL, the training time of the network was calculated as 34 min 33 s and the accuracy percentage was nearly 100%. Originality/value Compared to the results in the literature ranging from 89.4% to 95.6%, using FNDCNNTL, better results were found in the paper.

scholarly journals Deep convolutional neural networks for Raman spectrum recognition: a unified solution

The Analyst ◽  
2017 ◽  
Vol 142 (21) ◽  
pp. 4067-4074 ◽  
Author(s):  
Jinchao Liu ◽  
Margarita Osadchy ◽  
Lorna Ashton ◽  
Michael Foster ◽  
Christopher J. Solomon ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Raman Spectrum ◽  
Convolutional Neural Network ◽  
Raman Spectra ◽  
Convolutional Neural Networks ◽  
Deep Convolutional Neural Networks

Classification of unprocessed Raman spectra using a convolutional neural network.

scholarly journals Golf swing classification with multiple deep convolutional neural networks

2018 ◽  
Vol 14 (10) ◽  
pp. 155014771880218 ◽  
Author(s):  
Libin Jiao ◽  
Rongfang Bie ◽  
Hao Wu ◽  
Yu Wei ◽  
Jixin Ma ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Convolutional Neural Networks ◽  
Golf Swing ◽  
Support Vector ◽  
Classification Methods ◽  
Deep Convolutional Neural Networks ◽  
Machine Method ◽  
And Performance

The use of smart sports equipment and body sensory systems supervising daily sports training is gradually emerging in professional and amateur sports; however, the problem of processing large amounts of data from sensors used in sport and discovering constructive knowledge is a novel topic and the focus of our research. In this article, we investigate golf swing data classification methods based on varieties of representative convolutional neural networks (deep convolutional neural networks) which are fed with swing data from embedded multi-sensors, to group the multi-channel golf swing data labeled by hybrid categories from different golf players and swing shapes. In particular, four convolutional neural classifiers are customized: “GolfVanillaCNN” with the convolutional layers, “GolfVGG” with the stacked convolutional layers, “GolfInception” with the multi-scale convolutional layers, and “GolfResNet” with the residual learning. Testing on the real-world swing dataset sampled from the system integrating two strain gage sensors, three-axis accelerometer, and three-axis gyroscope, we explore the accuracy and performance of our convolutional neural network–based classifiers from two perspectives: classification implementations and sensor combinations. Besides, we further evaluate the performance of these four classifiers in terms of classification accuracy, precision–recall curves, and F1 scores. These common classification indicators illustrate that our convolutional neural network–based classifiers can basically group the golf swing predefined by the combination of shapes and golf players correctly and outperform support vector machine method representing traditional classification methods.

scholarly journals Convolutional Neural Networks for Leaf Image-Based Plant Disease Classification

2019 ◽  
Vol 8 (4) ◽  
pp. 328
Author(s):  
Sachin B. Jadhav
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Convolutional Neural Networks ◽  
Plant Diseases ◽  
Experimental Results ◽  
Disease Classification ◽  
Soybean Leaves ◽  
Soybean Diseases ◽  
Validation Strategy

<span lang="EN-US">Plant pathologists desire soft computing technology for accurate and reliable diagnosis of plant diseases. In this study, we propose an efficient soybean disease identification method based on a transfer learning approach by using a pre-trained convolutional neural network (CNN’s) such as AlexNet, GoogleNet, VGG16, ResNet101, and DensNet201. The proposed convolutional neural networks were trained using 1200 plant village image dataset of diseased and healthy soybean leaves, to identify three soybean diseases out of healthy leaves. Pre-trained CNN used to enable a fast and easy system implementation in practice. We used the five-fold cross-validation strategy to analyze the performance of networks. In this study, we used a pre-trained convolutional neural network as feature extractors and classifiers. The experimental results based on the proposed approach using pre-trained AlexNet, GoogleNet, VGG16, ResNet101, and DensNet201 networks achieve an accuracy of 95%, 96.4 %, 96.4 %, 92.1%, 93.6% respectively. The experimental results for the identification of soybean diseases indicated that the proposed networks model achieves the highest accuracy</span>

scholarly journals The Role and Utilization of CNN in Automatic Logo Based Document Image Retrieval Methods

2018 ◽  
Vol 7 (3.1) ◽  
pp. 13
Author(s):  
Raveendra K ◽  
R Vinoth Kanna
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Feature Extraction ◽  
Image Retrieval ◽  
Convolutional Neural Network ◽  
Convolutional Neural Networks ◽  
Document Image ◽  
Retrieval Process ◽  
Pictorial Representations

Automatic logo based document image retrieval process is an essential and mostly used method in the feature extraction applications. In this paper the architecture of Convolutional Neural Network (CNN) was elaborately explained with pictorial representations in order to understand the complex Convolutional Neural Networks process in a simplified way. The main objective of this paper is to effectively utilize the CNN in the process of automatic logo based document image retrieval methods.  

scholarly journals A Survey on Techniques used in Medical Imaging Processing

2021 ◽  
Vol 2089 (1) ◽  
pp. 012013
Author(s):  
Priyadarshini Chatterjee ◽  
Dutta Sushama Rani
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Image Analysis ◽  
Convolutional Neural Network ◽  
Convolutional Neural Networks ◽  
Network Architecture ◽  
Medical Image Analysis ◽  
Artificial Neural ◽  
Automated Screening ◽  
To Come

Abstract Automated diagnosis of diseases in the recent years have gain lots of advantages and potential. Specially automated screening of cancers has helped the clinicians over the time. Sometimes it is seen that the diagnosis of the clinicians is biased but automated detection can help them to come to a proper conclusion. Automated screening is implemented using either artificial inter connected system or convolutional inter connected system. As Artificial neural network is slow in computation, so Convolutional Neural Network has achieved lots of importance in the recent years. It is also seen that Convolutional Neural Network architecture requires a smaller number of datasets. This also provides them an edge over Artificial Neural Networks. Convolutional Neural Networks is used for both segmentation and classification. Image dissection is one of the important steps in the model used for any kind of image analysis. This paper surveys various such Convolutional Neural Networks that are used for medical image analysis.

Optimasi Akurasi Metode Convolutional Neural Network untuk Identifikasi Jenis Sampah

2021 ◽  
Vol 5 (2) ◽  
pp. 312-318
Author(s):  
Rima Dias Ramadhani ◽  
Afandi Nur Aziz Thohari ◽  
Condro Kartiko ◽  
Apri Junaidi ◽  
Tri Ginanjar Laksana ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Computer Science ◽  
No Value ◽  
Convolutional Neural Networks ◽  
Training Process ◽  
Indonesian Government ◽  
Speed Up ◽  
Model Training

Waste is goods / materials that have no value in the scope of production, where in some cases the waste is disposed of carelessly and can damage the environment. The Indonesian government in 2019 recorded waste reaching 66-67 million tons, which is higher than the previous year, which was 64 million tons. Waste is differentiated based on its type, namely organic and anorganic waste. In the field of computer science, the process of sensing the type waste can be done using a camera and the Convolutional Neural Networks (CNN) method, which is a type of neural network that works by receiving input in the form of images. The input will be trained using CNN architecture so that it will produce output that can recognize the object being inputted. This study optimizes the use of the CNN method to obtain accurate results in identifying types of waste. Optimization is done by adding several hyperparameters to the CNN architecture. By adding hyperparameters, the accuracy value is 91.2%. Meanwhile, if the hyperparameter is not used, the accuracy value is only 67.6%. There are three hyperparameters used to increase the accuracy value of the model. They are dropout, padding, and stride. 20% increase in dropout to increase training overfit. Whereas padding and stride are used to speed up the model training process.

Sign in / Sign up

Export Citation Format

Share Document