scholarly journals Energy and Economic Analysis of Curved, Straight, and Spiral Flow Flat-Plate Solar Water Collector

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
U. Muthuraman ◽  
R. Shankar ◽  
Vinay Kumar Nassa ◽  
Alagar Karthick ◽  
Chandrabhanu Malla ◽  
...  
Keyword(s):  
Economic Analysis ◽  
Tamil Nadu ◽  
Exergy Efficiency ◽  
Hot Water ◽  
Maximum Efficiency ◽  
Spiral Flow ◽  
Water Heater ◽  
Solar Water ◽  
Copper Material ◽  
Water Collector

In this work, the solar water collector flow tube geometry is modified as curved and spiral to enhance the system’s performance. The investigation is carried out experimentally under the meteorological conditions of the Kovilpatti region (9°10 ′ 0 ″ N, 77°52 ′ 0 ″ E), Tamil Nadu, India. The flow pipes of the solar water heater are made of copper material which has higher thermal conductivity to recover the water heat as thermal energy. The influence of the mass flow rate (MF) on the flow pipes with respect to the surface temperature for various configurations of the flow tubes is investigated. The two MFs of 0.0045 kg/s and 0.006 kg/s are tested. The MF of 0.006 kg/s yields the maximum efficiency of 73% compared to the other MF. The straight, curved, and spiral tubes yielded the maximum efficiency of 58%, 62%, and 69%, respectively, at 0.0045 kg/s. Similarly, the MF of 0.006 kg/s obtained an efficiency of 62%, 65%, and 73% for straight, curved, and spiral flow tubes, respectively. The economics and exergy of the system are analyzed. The maximum exergy efficiency of the collector is estimated to be 32% for the MF of 0.0045 kg/s for the spiral flow collector, and for the 0.006 kg/s MF, the obtained exergy efficiency is 27% for the spiral flow water heater. The economic analysis revealed that the expense is $0.0608 and $0.0512 worth of hot water produced for the domestic space heating.

scholarly journals Creating a TRNSYS Model of Spiral Flow Flat Plate Solar Water Heater (SFSWH) and Comparing Unique Results with Parallel Flow Flat Plate Collector

2019 ◽  
Vol 8 (12S) ◽  
pp. 49-56
Keyword(s):  
Flat Plate ◽  
Parallel Flow ◽  
Hot Water ◽  
Simulation Program ◽  
Outlet Temperature ◽  
Solar Water Heater ◽  
Spiral Flow ◽  
Water Heater ◽  
Solar Water ◽  
Flat Plate Collector

A unique SFSWH system is proposed for domestic hot water in Kovilpatti, TamilNadu, 9° 10′N 77°52′E. This SFSWH system is successfully simulated in TRNSYS Software and the results are clarified with the similarities of parallel flow solar water heater. Firstly, a complete model of spiral flow flat plate collector is formulated in TRNSYS software and taking into an account of heat transfer, outlet temperature and efficiency which are theoretically compared with parallel flow flat plate collector by means of TRNSYS simulation program. The SFSWH system performs a function with the assist of NASA surface Meteorology and solar energy year readings and with the assist of ISRO’s solar calculator application relative to Kovilpatti, Tamilnadu, India. To prove the accuracy of TRNSYS model of the SFSWH, an experimental setup is done at kovilpatti and required results were obtained under kovilpatti weather conditions. The validation of this SFSWH TRNSYS model simulation program is completed by checking the similarities between the predicted results from software with original results. This SFSWH TRNSYS model result shows the SFSWH is functioned more effectively compared with conventional parallel flow water heater. Thus TRNSYS model is reliable and which alternates the experimentation.

Experimental Investigation and Economic Analysis of Solar Water Heater Fitted with Hindrance Promoter

2021 ◽  
Vol 15 ◽  
Author(s):  
Rohit Khargotra ◽  
Raj Kumar ◽  
Tej Singh
Keyword(s):  
Economic Analysis ◽  
Operating Cost ◽  
Research Work ◽  
Specific Effect ◽  
Outlet Temperature ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Collector Efficiency ◽  
Water Collector

Objective: To experimentally investigate the thermal performance of solar water heater by heat enhancer The objective of this research work to increase the instantaneous collector efficiency and the economic analysis of solar water heater. Method: To expand the regime availability of solar water heater, a minimum operating cost solar water collector is fabricated and is experimentally analyzed in Solan, Himachal Pradesh, India. In this solar water heater, the absorber tubes are made up of copper providing glazing on the top surface. An experimental is performed to analyze the influence of distinct parameters of the hindrance promoter on heat transfer of Solar water heater (SWH). The SWH is provided by the hindrance promoter with repeated winglet imposed on both side copper strips. Testing is carried out in the three main season’s summer, winter and rainy seasons. Result: The result shows that the instantaneous efficiency of the collector by inserting the hindrance promoter is found to be 81%. Conclusion: The average temperature of the 50l tank of water collected each day in the rainy, winter and summer season are, 60 ˚C, 52 ˚C and 65 ˚C respectively. Furthermore, to see the specific effect on the outlet water temperature of the SWH system a delta winglet is introduced into the absorber tube and compare with the smooth tube outlet temperature. The instantaneous efficiency of the collector by inserting the hindrance promoter is found to be 81.5%. Also, a detailed study on the economic analysis and the payback period is also investigated in this paper.

scholarly journals Evaluation of a High-Performance Solar Home in Loveland, Colorado

2006 ◽  
Vol 129 (2) ◽  
pp. 226-234
Author(s):  
Robert Hendron ◽  
Mark Eastment ◽  
Ed Hancock ◽  
Greg Barker ◽  
Paul Reeves
Keyword(s):  
High Performance ◽  
Energy Savings ◽  
High Efficiency ◽  
Building Envelope ◽  
Operating Conditions ◽  
Hot Water ◽  
Space Heating ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water

Building America (BA) partner McStain Neighborhoods built the Discovery House in Loveland, CO, with an extensive package of energy-efficient features, including a high-performance envelope, efficient mechanical systems, a solar water heater integrated with the space-heating system, a heat-recovery ventilator (HRV), and ENERGY STAR appliances. The National Renewable Energy Laboratory (NREL) and Building Science Consortium conducted short-term field-testing and building energy simulations to evaluate the performance of the house. These evaluations are utilized by BA to improve future prototype designs and to identify critical research needs. The Discovery House building envelope and ducts were very tight under normal operating conditions. The HRV provided fresh air at a rate of about 35L∕s(75cfm), consistent with the recommendations of ASHRAE Standard 62.2. The solar hot water system is expected to meet the bulk of the domestic hot water (DHW) load (>83%), but only about 12% of the space-heating load. DOE-2.2 simulations predict whole-house source energy savings of 54% compared to the BA Benchmark (Hendron, R., 2005 NREL Report No. 37529, NREL, Golden, CO). The largest contributors to energy savings beyond McStain’s standard practice are the solar water heater, HRV, improved air distribution, high-efficiency boiler, and compact fluorescent lighting package.

scholarly journals Experimental Study of Solar Water Heater under the Libyan Climate Conditions

2020 ◽  
Vol 14 (9) ◽  
pp. 28
Author(s):  
Ali. J. S. Alrafad ◽  
Abdihg S. Alrafad ◽  
Tarek. Hamad ◽  
Ahmed. Nassar
Keyword(s):  
Fossil Fuel ◽  
Hot Water ◽  
Solar Water Heater ◽  
Way Of Life ◽  
Water Heater ◽  
Climate Conditions ◽  
Solar Water ◽  
Solar Heater ◽  
Glass Surfaces ◽  
Local Materials

In our modern societies, One of the main and simplest signature traits is hot water as a convenient and efficient way of life either for industrial and domestic purposes, however, obtaining hot water in most cases will be through fossil fuel either by direct burning for the fuel for heating or indirectly by using electricity that generated by fossil fuel. Using solar heaters will limit the in some extent the usage of fossil fuel. A flat solar water heater of (165 to 175) cm3 has been constructed to be used as a model for educational purposes. The solar heater is made of local materials consist of galvanized iron pipes, glass surfaces, wool insulation, aluminum frame, and fixed iron base. Moreover, Thermocouples, pyranometer, and an anemometer were used to test the performance of the heater in four days in May for the angle of inclination of the complex 320 is on the horizontal. In conclusion, the daily average efficiency was around 57%. The temperature in the tank is about  62 0C at noon, which is sufficient for home use throughout the day.

scholarly journals Evaluation of a High-Performance Solar Home in Loveland, Colorado

Solar Energy ◽  
2005 ◽  
Author(s):  
Robert Hendron ◽  
Mark Eastment ◽  
Ed Hancock ◽  
Greg Barker ◽  
Paul Reeves
Keyword(s):  
High Performance ◽  
Energy Savings ◽  
High Efficiency ◽  
Building Envelope ◽  
Operating Conditions ◽  
Hot Water ◽  
Space Heating ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water

Building America (BA) partner McStain Neighborhoods built the Discovery House in Loveland, Colorado, with an extensive package of energy-efficient features, including a high-performance envelope, efficient mechanical systems, a solar water heater integrated with the space-heating system, a heat-recovery ventilator (HRV), and ENERGY STAR™ appliances. The National Renewable Energy Laboratory (NREL) and Building Science Consortium (BSC) conducted short-term field-testing and building energy simulations to evaluate the performance of the house. These evaluations are utilized by BA to improve future prototype designs and to identify critical research needs. The Discovery House building envelope and ducts were very tight under normal operating conditions. The HRV provided fresh air at a rate of about 75 cfm (35 l/s), consistent with the recommendations of ASHRAE Standard 62.2. The solar hot water system is expected to meet the bulk of the domestic hot water (DHW) load (>83%), but only about 12% of the space-heating load. DOE-2.2 simulations predict whole-house source energy savings of 54% compared to the BA Benchmark [1]. The largest contributors to energy savings beyond McStain’s standard practice are the solar water heater, HRV, improved air distribution, high-efficiency boiler, and compact fluorescent lighting package.

scholarly journals Assessment and Modeling of Household-Scale Solar Water Heater Application in Zambia: Technical, Environmental, and Energy Analysis

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Mehdi Jahangiri ◽  
Esther T. Akinlabi ◽  
Sam M. Sichilalu
Keyword(s):  
Fossil Fuels ◽  
Hot Water ◽  
Climate Data ◽  
Ghg Emission ◽  
Water Heater ◽  
Ghg Mitigation ◽  
Solar Water ◽  
Water Heaters ◽  
Industrial Sectors ◽  
Solar Water Heaters

Solar water heaters (SWHs) are one of the most effective plans for general and easy use of solar energy to supply hot water in domestic and industrial sectors. This paper gives the first-ever attempts to assess the optimal localization of SWHs across 22 major cities in Zambia, as well as determine the possibility of hot water generation and model the greenhouse gas (GHG) emission saving. The climate data used is extracted by using the MeteoSyn software which is modeled in TSOL™. Results show the high potential of GHG emission reduction due to nonconsumption of fossil fuels owing to the deployment of SWHs, and three cities Kabwe, Chipata, and Mbala had the highest GHG mitigation by 1552.97 kg/y, 1394.8 kg/y, and 1321.39 kg/y, respectively. On average, SWHs provide 62.47% of space heating and 96.05% of the sanitary hot water requirement of consumers. The findings have shown the potential for the deployment of SWHs in Zambia. The techno-enviro study in this paper can be used by the policymakers of Zambia and countries with similar climates.

Solar Water Heaters: A Review of Systems Research and Design Innovation

Green ◽  
2011 ◽  
Vol 1 (2) ◽  
Author(s):  
Brian Norton
Keyword(s):  
System Development ◽  
Unit Cost ◽  
Hot Water ◽  
Water Heating ◽  
Water Heater ◽  
Solar Water Heating ◽  
Solar Water ◽  
Water Heaters ◽  
Systems Research ◽  
And Performance

AbstractSolar water heating can be considered to be an established mature technology. The achievement of this status is the outcome of over a century of system development that culminated with a flourish of innovation in the last thirty years. Drivers for research and development have been achieving economic viability by devising systems that, for specific applications in particular climate contexts produced more hot water per unit cost. Reductions in both initial capital and installation costs have been achieved as well as in those associated with subsequent operation and maintenance. Research on solar water heating is discussed with the emphasis on overall systems though some key aspects of component development are also outlined. A comprehensive taxonomy is presented of the generic types of solar water heater that have emerged and their features, characteristics and performance are discussed.

The Device of the Automatic Backflow in Solar Water Heater-Temperature Control and Backflow for Pipe of Water Heater

2013 ◽  
Vol 827 ◽  
pp. 99-104
Author(s):  
Bin Li ◽  
Xi Chen ◽  
Xin Hao Li ◽  
Lu Kuan Ma ◽  
Wen Bo Lu ◽  
...  
Keyword(s):  
Water Resources ◽  
Cold Water ◽  
Hot Water ◽  
Water Tank ◽  
Solar Water Heater ◽  
Recycle Water ◽  
Delay Effect ◽  
Water Heater ◽  
Domestic Water ◽  
Solar Water

Now in general use in solar water heater, there is a long pipeline between water heater and tap, we have to empty the stored cold water before we use the hot water; and usually the water cannot meet required temperature due to the heating delay effect, thus the water also should be emptied, which leads to a waste of water resources. In order to solve this water wastage, we propose a device which can help to control the temperature and backflow of the water in water heater. The device accomplishes backflow of cold water automatically under the effect of gravity, and refluxed water will be stored in the recycle-water tank, thus ensuring the result that the water temperature satisfies the requirement. After the recycle-water tank is full, it will trigger the buoy to control the relay switch, then the water pump start to work to force the water into the water heater tank. Thus, realizing the recycling of water. This device can significantly save water resources in domestic water, and it has a broad market prospect.

Second-Law Analysis of a Two-Phase Self-Pumping Solar Water Heater

1992 ◽  
Vol 114 (3) ◽  
pp. 188-193 ◽  
Author(s):  
H. A. Walker ◽  
J. H. Davidson
Keyword(s):  
Heat Transfer ◽  
Entropy Generation ◽  
Hot Water ◽  
Solar Water Heater ◽  
Total Entropy ◽  
Water Heating ◽  
Water Heater ◽  
Two Phase ◽  
Solar Water ◽  
Order Of Magnitude

Entropy generated by operation of a two-phase self-pumping solar water heater under Solar Rating and Certification Corporation rating conditions is computed numerically in a methodology based on an exergy cascade. An order of magnitude analysis shows that entropy generation is dominated by heat transfer across temperature differences. Conversion of radiant solar energy incident on the collector to thermal energy within the collector accounts for 87.1 percent of total entropy generation. Thermal losses are responsible for 9.9 percent of total entropy generation, and heat transfer across the condenser accounts for 2.4 percent of the total entropy generation. Mixing in the tempering valve is responsible for 0.7 percent of the total entropy generation. Approximately one half of the entropy generated by thermal losses is attributable to the self-pumping process. The procedure to determine total entropy generation can be used in a parametric study to evaluate the performance of two-phase hot water heating systems relative to other solar water heating options.

scholarly journals Experimental and Modeling Dynamic Study of the Indirect Solar Water Heater: Application to Rabat Morocco

2018 ◽  
Vol 7 (1) ◽  
pp. 86
Author(s):  
Ouhammou Badr ◽  
Azeddine Frimane ◽  
Aggour Mohammed ◽  
Brahim Daouchi ◽  
Abdellah Bah ◽  
...  
Keyword(s):  
Storage Tank ◽  
Weather Conditions ◽  
Hot Water ◽  
Experimental Setup ◽  
Solar Water Heater ◽  
Water Heater ◽  
Forced Circulation ◽  
Solar Water ◽  
Experimental Values ◽  
Temperature Output

The Indirect Solar Water Heater System (SWHS) with Forced Circulation is modeled by proposing a theoretical dynamic multi-node model. The SWHS, which works with a 1,91 m<sup>2</sup> PFC and 300 L storage tank, and it is equipped with available forced circulation scale system fitted with an automated sub-system that controlled hot water, is what the experimental setup consisted of. The system, which 100% heated water by only using solar energy. The experimental weather conditions are measured every one minute. The experiments validation steps were performed for two periods, the first one concern the cloudy days in December, the second for the sunny days in May; the average deviations between the predicted and the experimental values is 2 %, 5 % for the water temperature output and for the useful energy  are 4 %, 9 % respectively for the both typical days, which is very satisfied. The thermal efficiency was determined experimentally and theoretically and shown to agree well with the EN12975 standard for the flow rate between 0,02 kg/s and 0,2kg/s.

Sign in / Sign up

Export Citation Format

Share Document