scholarly journals The Physical Modeling Analysis of Fate and Transport of Silver Nanoparticles Dispersed by Water Flow

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Achmad Syafiuddin ◽  
Salmiati Salmiati ◽  
Mohamad Ali Fulazzaky ◽  
Dedy Dwi Prastyo ◽  
Raj Boopathy ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Water Flow ◽  
Treatment Process ◽  
Fate And Transport ◽  
Consumer Products ◽  
Elemental Content ◽  
Wastewater Treatment Process ◽  
Modeling Analysis ◽  
Natural Flow ◽  
Downstream Area

The release of silver nanoparticles (AgNPs) from consumer products into an environment has become a central issue for many countries. Despite that the fate and behaviors of AgNPs incorporated into a wastewater have been investigated by building a model of wastewater treatment process, the transport and retention behaviors of AgNPs influenced by the water flow in a river must be understood. The physical model of simulated river to mimic a natural flow of river was proposed to investigate the behaviors of AgNP transport in the river. The results showed that the large amount of AgNPs deposited on the riverbed as Ag sediment with only 1.26% of AgNPs remained in the water flow. The elemental content of Ag freely dispersed across the riverbed increases from the upstream to downstream area of the simulated river. Verification of the spatial distribution of Ag dispersed along the water flow may contribute to a better understanding of the fate and transport of AgNPs in the aquatic environment.

Fate and mass balances of triclosan (TCS), tetrabromobisphenol A (TBBPA) and tribromobisphenol A (tri-BBPA) during the municipal wastewater treatment process

2013 ◽  
Vol 48 (3) ◽  
pp. 255-265 ◽  
Author(s):  
Kerry McPhedran ◽  
Rajesh Seth ◽  
Min Song ◽  
Shaogang Chu ◽  
Robert J. Letcher
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Treatment Process ◽  
Wastewater Treatment Plants ◽  
Consumer Products ◽  
Tetrabromobisphenol A ◽  
Municipal Wastewater Treatment ◽  
Mass Balances ◽  
Wastewater Treatment Process ◽  
Detroit River

Municipal wastewater treatment plants (MWTPs) are impacted by down-the-drain influents of anthropogenic chemicals. These chemicals are in consumer products and include the flame retardant tetrabromobisphenol A (TBBPA) and antimicrobial triclosan (TCS). Characterization of the distribution of TBBPA, TCS and the TBBPA product tribromobisphenol A (tri-BBPA) was determined at five stages along the treatment process of a typical Canadian MWTP facility. Overall, the TCS concentrations for both liquid (influents, primary effluents and final effluents (FEs)) and solid samples (primary and waste activated sludges) were similar to reported ranges in the literature. In contrast to TCS, both TBBPA and tri-BBPA concentrations were scarcely available in the literature. The TBBPA concentrations were within literature ranges for both influents and sludges, while the tri-BBPA sludge concentrations were markedly higher than a single available previous study. Mass balances for TCS, TBBPA and tri-BBPA indicated 7, 9 and 42%, respectively, of each chemical remaining in the FEs. The resultant annual mass loadings into the Detroit River were estimated to be 3.3 kg, 6.57 g, and 21.5 g for TCS, TBBPA and tri-BBPA, respectively.

scholarly journals The Fate of Anthropogenic Nanoparticles, nTiO2 and nCeO2, in Waste Water Treatment

Water ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2509
Author(s):  
Thomas Lange ◽  
Petra Schneider ◽  
Stefan Schymura ◽  
Karsten Franke
Keyword(s):  
Wastewater Treatment ◽  
Treatment Process ◽  
Waste Water Treatment ◽  
Consumer Products ◽  
Treatment System ◽  
Manufacturing Processes ◽  
Wastewater Treatment Process ◽  
Icp Ms ◽  
Health Related ◽  
Wastewater Treatment Systems

Wastewater treatment is one of the main end-of-life scenarios, as well as a possible reentry point into the environment, for anthropogenic nanoparticles (NP). These can be released from consumer products such as sunscreen or antibacterial clothing, from health-related applications or from manufacturing processes such as the use of polishing materials (nCeO2) or paints (nTiO2). The use of NP has dramatically increased over recent years and initial studies have examined the possibility of toxic or environmentally hazardous effects of these particles, as well as their behavior when released. This study focuses on the fate of nTiO2 and nCeO2 during the wastewater treatment process using lab scale wastewater treatment systems to simulate the NP mass flow in the wastewater treatment process. The feasibility of single particle mass spectroscopy (sp-ICP-MS) was tested to determine the NP load. The results show that nTiO2 and nCeO2 are adsorbed to at least 90 percent of the sludge. Furthermore, the results indicate that there are processes during the passage of the treatment system that lead to a modification of the NP shape in the effluent, as NP are observed to be partially smaller in effluent than in the added solution. This observation was made particularly for nCeO2 and might be due to dissolution processes or sedimentation of larger particles during the passage of the treatment system.

Comparison of F-specific bacteriophage, enterococci, and faecal coliform densities through a wastewater treatment process employing oxidation ponds

1995 ◽  
Vol 31 (5-6) ◽  
pp. 85-89 ◽  
Author(s):  
S. J. Turner ◽  
G. D. Lewis
Keyword(s):  
Wastewater Treatment ◽  
Treatment Process ◽  
Faecal Coliform ◽  
Indicator Organisms ◽  
Faecal Coliforms ◽  
Wastewater Treatment Process ◽  
Oxidation Pond ◽  
Oxidation Ponds ◽  
Specific Bacteriophage

Over a 12 month period F-specific bacteriophages, faecal coliforms and enterococci were compared as microbial indicator organisms for the quality of a wastewater treatment (oxidation pond) system. Results suggest that enterococci may be the most useful indicator for oxidation pond systems.

Sign in / Sign up

Export Citation Format

Share Document