Biogenic Ferrihydrite Nanoparticles Produced by Klebsiella oxytoca: Characterization, Physicochemical Properties and Bovine Serum Albumin Interactions

The synthesis of nanoparticles inside microorganisms is an economical alternative to chemical and physical methods of nanoparticle synthesis. In this study, ferrihydrite nanoparticles synthesized by Klebsiella oxytoca bacterium in special conditions were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDS), small-angle X-ray (SAXS), UV-Vis spectroscopy, fluorescence, fluorescence resonance energy transfer (FRET), and molecular docking. The morphology and the structure of the particles were characterized by means of SEM and SAXS. The elemental content was determined by means of the EDS method. The absorption properties of the ferrihydrite nanoparticles were investigated by UV-Vis spectroscopy. The binding mechanism of the biogenic ferrihydrite nanoparticles to Bovine Serum Albumin (BSA) protein, studied by fluorescence, showed a static and weak process, combined with FRET. Protein denaturation by temperature and urea in the presence of the ferrihydrite nanoparticles demonstrated their influence on the unfolding process. The AutoDock Vina and UCSF Chimera programs were used to predict the optimal binding site of the ferrihydrite to BSA and to find the location of the hydrophobic cavities in the sub-domain IIA of the BSA structure.

Consumer-driven nutrient recycling of freshwater decapods: linking ecological theories and application in integrated multi-trophic aquaculture

The Metabolic Theory of Ecology (MET) and the Ecological Stoichiometry Theory (EST) are central and complementary in the consumer-driven recycling conceptual basis. The comprehension of physiological processes of organisms at different levels of organizations is essential to explore and predict nutrient recycling behavior in different scenarios, and to design integrated productive systems that efficiently use the nutrient inputs through an adjusted mass balance. We fed with fish-feed three species of decapods from different families and with aquacultural potential to explore the animal-mediated nutrient dynamic and its applicability in productive systems. We tested whether physiological (body mass, body elemental content), ecological (diet), taxonomic and experimental (time of incubation) variables predicts N and P excretion rates and ratios across and within taxa. We also analysed body mass and body elemental content independently as predictors of N and P excretion of decapods across, among and within taxa. Finally, we verified if body content scales allometrically across and within taxa and if differed among taxa. Body mass and taxonomic identity predicted nutrient excretion rates both across and within taxa. When physiological variables were analysed independently, body size best predicted nutrient mineralization in both scales of analyses. Regarding body elemental content, only body P content scaled negatively with body mass across taxa. Results showed higher N-requirements and lower C:N of prawns than anomurans and crabs. The role of crustaceans as nutrient recyclers depends mainly on the species and body mass, and should be considered to select complementary species that efficiently use feed resources. Prawns need more protein in their feed and might be integrated with fish of higher N-requirements, while crabs and anomurans, with fish of lower N-requirements. Our study contributed to the background of MTE and EST through empirical data obtained from decapods and provided useful information to achieve more efficient aquaculture integration systems.

Tribological behavior and film-forming mechanism of a polytetrafluoroethylene/polyester fabric composite

Purpose The purpose of this study is to determine the tribological behavior and wear mechanism of a polytetrafluoroethylene (PTFE)/polyester (PET) fabric composite for application as a self-lubricating liner suitable for high-speed and low-load friction conditions. Design/methodology/approach The effects of different loads and sliding speeds on the friction coefficients and wear characteristics of the composite were studied using reciprocating friction tests. Scanning electron microscopy, extended depth-of-field microscopy, and energy-dispersive X-ray spectrometry was used to analyze the worn surface morphology, wear depth and elemental content of the lubrication films, respectively. Findings The friction coefficient curves of the composites presented a long-term steady wear stage under different sliding conditions. With increasing sliding speed, the friction coefficient and wear depth of the composite slowly increased. The film-forming mechanism of the composite revealed that the PTFE/PET ply yarn on the composite surface formed complete PTFE lubrication films at the initial sliding stage. Originality/value The PTFE/PET fabric composite maintained good friction stability and high-speed adaptability, which demonstrates that the composite has broad application prospects as a highly reliable self-lubricating bearing liner with a long lifespan.

The Effect of Cultivation Practices on Agronomic Performance, Elemental Composition and Isotopic Signature of Spring Oat (Avena sativa L.)

The present study investigated the effects of cultivation practices on grain (oats) yield and yield components, such as straw yield, harvest index, thousand kernel weight, and plant lodging. In addition, multi-element composition and isotopic signature (δ13C, δ15N) of the oat grains were studied. The spring oat cultivar ‘Noni’ was grown in a long-term field experiment during 2015–2020, using three management practices: control without organic amendment, incorporation of manure every third year and incorporation of crop residues/cover crop in the rotation. Synthetic nitrogen (N) (0, 55, 110 and 165 kg/ha) was applied during oat development in each system. Multi-element analysis of mature grains from two consecutive years (2016 and 2017) was performed using EDXRF spectroscopy, while stable isotope ratios of carbon (C) and nitrogen (N) were obtained using an elemental analyzer coupled to an isotope ratio mass spectrometer (EA/IRMS). The results show how cultivation practices affect yield components and isotopic and elemental signatures. Increasing the N rate improved both the oat grain and straw yields and increased susceptibility to lodging. The results show how the elemental content (Si, Ca, Zn, Fe, Ti, Br and Rb) in the oat grains were influenced by intensification, and a noticeable decrease in elemental content at higher N rates was the result of a dilution effect of increased dry matter production. The mean δ15N values in oat grains ranged from 2.5‰ to 6.4‰ and decreased with increasing N rate, while δ13C values ranged from −29.9‰ to –28.9‰. Based on the δ15N values, it was possible to detect the addition of synthetic N above an N rate of 55 kg/ha, although it was impossible to differentiate between different management practices using stable isotopes.

Effect of Various Rates of P from Alternative and Traditional Sources on Butterhead Lettuce (Lactuca sativa L.) Grown on Peat Substrate

Previous research indicated the potential use of struvite (STR) as an alternative source of phosphorus (P) in crop production. A greenhouse experiment was conducted to evaluate the effect of STR and triple superphosphate (TSP) on the growth and chemical composition of butterhead lettuce grown on peat substrate over a three-month period (May–July). Both alternative (STR) and conventional (TSP) fertilizers were applied at three rates: (1) recommended rate based on the elemental content of substrate and crop nutritional need; (2) reduced rate (50% lower than recommended); and (3) increased rate (50% higher than recommended). Unfertilized (control) plants were also grown in the pot experiment. As expected, fertilizer application tended to increase the content of heavy metals in the substrate. Thus, an increase in Zn, Pb, and Cu content in peat substrate was found following STR amendments. However, compared with unfertilized plants, the applied rates of the STR and TSP fertilizers did not increase the content of Cd and Cu in the plant leaf, while Hg content was below the detection limit. In addition, Zn content in the plant leaf significantly decreased following STR and TSP applications. In comparison to unfertilized plants, both alternative and conventional fertilizers increased the content of P and nitrate nitrogen (N-NO3−) in the plant leaf while their effect on Mg content was negligible. The increased rate of STR was the best fertilizer treatment because it produced the largest number of leaves, which were also characterized by the highest P content. Our findings showed that STR was an effective source of P in butterhead lettuce cultivation without adverse effects on heavy metal accumulation.

The Effect of TiO2 Nanoparticles on the Composition and Ultrastructure of Wheat

The present work aims to follow the influence of TiO2 nanoparticles (TiO2 NPs) on bioactive compounds, the elemental content of wheat, and on wheat leaves’ ultrastructure. Synthesized nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and transmission electron microscopy (TEM). The concentration of phenolic compounds, assimilation pigments, antioxidant capacity, elemental content, as well as the ultrastructural changes that may occur in the wheat plants grown in the presence or absence of TiO2 NPs were evaluated. In plants grown in the presence of TiO2 NPs, the amount of assimilating pigments and total polyphenols decreased compared to the control sample, while the antioxidant activity of plants grown in amended soil was higher than those grown in control soil. Following ultrastructural analysis, no significant changes were observed in the leaves of TiO2-treated plants. Application of TiO2 NP to soil caused a significant reaction of the plant to stress conditions. This was revealed by the increase of antioxidant capacity and the decrease of chlorophyll, total polyphenols, and carotenoids. Besides, the application of TiO2 NP led to significant positive (K, Zn, Br, and Mo) and negative (Na, Mn, Fe, As, Sr, Sb, and Ba) variation of content.

Effects of grafting on some phytochemical traits and elemental composition in bitter gourd (Momordica charantia L.)

Grafting method in vegetables has been used in common due to positive effects in agriculture. In this context, it is focused that the studies aimed at increasing yield and quality through grafting. This research was carried out to determine the effects of grafting bitter gourd (Momordica charantia L.) onto pumpkin (Cucurbita maxima). Effects of grafting on extract yield, dry matter ratio, ash, and macro and micro elemental content of the fruits and leaves of bitter gourd were determined in greenhouse conditions. Grafting significantly increased the dry matter ratio and extract yield in the bitter gourd fruits and the ash content in young, mature and old leaves. In the fruits, a positive correlation (R = 0.9264) was found only between extract yield and dry matter ratio. The main important effect of grafting in terms of macro and micro elements appeared on the fruits of bitter gourd. The accumulation of Ca2+ in the leaves increased during maturation. The positive effect of grafting in terms of Ca2+ increase in fruits was higher in unripe fruits compared to ripe fruits. In addition to obtaining more extracts from the fruits bitter gourd, the enrichment of its fruits in terms of Ca2+ and K+ and its leaves in terms of Ca2+ increases the importance of these parts in terms of human nutrition.

Improving Long-Term Hydraulic Fracture Conductivity in Carbonate Formations by Substitution of Harder Minerals

Hydraulic fracturing is applied in tight formations to create conductive paths within the reservoir. However, the conductivity of the created fractures declines with time due to the closure stresses. The decline is sharp in soft formations because of proppant embedment and fracture surface asperities failure. The improvement in fracture surface hardness can mitigate the abovementioned challenges and sustain the fracture conductivity. This research targeted enhancing carbonate rock's hardness by forming minerals harder than calcite. Carbonate rocks, namely dolomite, limestone, and chalk, were treated at ambient temperature conditions by immersion into the aqueous solutions of NaF and ZnSO4 with a concentration of 0.1M. During treatment, the solution was sampled to monitor the changes in ion concentration and estimate the reaction kinetics by ICP - OES and IC devices. The hardness of rock samples was measured by impulse hammering technique before and after the treatment. The changes in rock's mineralogy and elemental content were studied by XRD and SEM imaging. The permeability of rocks was estimated by the steady-state gas injection method. The formation of smithsonite (ZnCO3, Mohs scale hardness - 4.5) and fluorite (CaF2, Mohs scale hardness - 4) was achieved in the reaction of calcite (CaCO3, Mohs scale hardness – 3) with ZnSO4 and NaF, respectively. Chalk and limestone reacted efficiently with both solutions; however, the dolomite reaction with solutions was feeble. XRD detected the newly formed smithsonite minerals, and it was observed in SEM images that minerals formed an interconnected net in chalk and limestone specimens. In dolomite samples, the minerals formed isolated gatherings that were sparsely located on the grains. The treatments caused the improvement of the rock specimen's hardness. 0.1M solution of NaF was not effective in strengthening the rock samples (only chalk sample experienced 6.7% improvement in hardness) because of low concentration of the solutions used; however, treatment resulted in negligible changes in permeability of the samples. In contrast, Young's modulus of limestone and chalk treated by ZnSO4 increased by 17% and 21%. Permeability of rocks treated by ZnSO4 reduced drastically, most likely due to the formation of gypsum as a byproduct of the reaction. This research presents a method for carbonate rock hardening via the transformation of parent calcite into harder minerals. It explains its possible application in the petroleum industry to sustain the conductivity of propped/acid fractures. The proposed technique will help to mitigate fracture conductivity decline due to proppant embedment and asperities failure issues that are especially severe in soft formations.

On the Issue of Establishing the Stages of Coal Metamorphism for Predicting the Hazardous Properties of Coal Seams

The characteristic stages of metamorphic transformations of mines are established according to the increase in the elemental content of carbon and changes in other components of organic matter. Stages of metamorphism transformations with an average carbon content of more than 93.6% can significantly differ in properties due to the unpredictability of the ratio between the components of organic matter. At these stages, even a minimal difference between the components can be the reason for the emergence of new properties of the coal seams. As the influence of the processes of metamorphism increases, the boundaries of the stages, determined by the percentage of carbon, narrow. The established stages of the transformation of reservoirs in terms of the individual proportion of the components in carbonization practically do not differ from the boundaries of the stages determined by the elemental composition of organic matter. It is noted that the average carbon content at the stages of seam metamorphism, determined by the yield of coke, in most cases does not coincide with the ranges of changes in the average carbon content, established by the individual content of the components or their share in carbonization. The inconsistency of the boundaries in the stages of seam metamorphism makes it unacceptable to use the coke yield as the main criterion for assessing the conversion of coal and even more so the manifestation of hazardous properties of coal seams.

Structure and Content Analysis of Raw Materials for Production of Trimanganese Tetraoxide Pigment

The research aims to reveal the structure, phase, and elemental content of manganese ores from deposits—Bogach (Karaganda region, Kazakhstan) and Zhaksy (Akmola region, Kazakhstan). The samples were studied with scanning electron microscopy with energy dispersive analysis (SEM-EDA), X-ray diffractometry (XRD), Infra-red spectroscopy (IRS). During the research, structural peculiarities, elemental and phase content of the samples have been revealed. The mineral matter of the Bogach deposit ore mainly consists of hollandite, cryptomelane, braunite, calcite, bixbyite, quartz. The Zhaksy deposit ore includes quartz, hollandite, bixbyite, pyrolusite. Bogach ore includes (wt.%) C(10.68), O(32.00), Mn(43.26), Ca(6.36), Si(3.51), Na(0.52), Al(1.13), Mg(0.69), K(1.85). The elemental content of Mn in Zhaksy ore is two times lower. Zhaksy ore includes (wt.%) C(23.77), O(32.1), Mn(21.81), Si(10.52), Al(5.13), K(1.21), Fe(5.47). The obtained data of the conducted spectral analysis indicate that both samples represent a polymineral heterogeneous structure. Conducted research allows to conclude, that by phase-elemental content the Bogach ore can be used for obtaining trimanganese tetraoxide pigment similar to manganese ores from West Sumatera deposit (Indonesia) by top-down method using grinding with a milling tool and high-temperature sintering.