scholarly journals The Reliability of a New Device for Measuring the Maximum Bite Force

2022 ◽  
Vol 2022 ◽  
pp. 1-6
Author(s):  
Santosh R. Patil ◽  
G. Maragathavalli ◽  
D. N. S. V. Ramesh ◽  
Giridhar S. Naidu ◽  
Mohammad Khursheed Alam ◽  
...  

Objective. To test the inter- and intraexaminer reliability of a recently developed instrument for measuring the maximum bite force (MBF). Material and Methods. Sixty patients who were clinically confirmed as having Oral Submucous Fibrosis (OSMF) and 60 healthy controls were included in this study. For each subject, age, gender, weight, height, and body mass index (BMI) were recorded. The maximum bite force was recorded in alternate order with a bite force sensor (D1) and an occlusal force meter (D2). Bite force was measured in the first molar region. Pearson’s correlation coefficient and kappa statistic were applied to assess the reliability between D1 and D2 in the assessment of maximum bite force. The independent t -test was performed to find the statistical significance between the two study groups. The paired t -test was applied to find out the difference between the right and left disease in groups of two devices separately. The one-way analysis of covariance (ANOVA) was performed to find the significant difference between grades of OSMF. Results. The results of the kappa values were 0.8531 ± 0.0724 and 0.7336 ± 0.0737 for interdevice reliability in OSMF patients in right and left sides. Similar findings were obtained in right and left sides of healthy individuals ( 0.7549 ± 0.0816 and 0.9440 ± 0.0806 ) and in the total sample ( 0.8132 ± 0.0544 and 0.8303 ± 0.0538 ). Pearson’s correlation coefficient between two devices revealed a high and significant positive correlation between D1 and D2 separately and in the whole sample. Conclusion. The observations of the present study suggest that the bite force sensor can be used as a reliable device for measuring bite force.

2004 ◽  
Vol 70 (12) ◽  
pp. 7066-7069 ◽  
Author(s):  
Günter Kampf ◽  
Christiane Ostermeyer

ABSTRACT For assessment of the efficacy of surgical hand disinfection, European reference method prEN 12791 prescribes that the hands must be kept wet with the reference alcohol for 3 min regardless of the applied volume. The aim of this study was to determine whether the applied volume of the reference disinfectant n-propanol (60%, vol/vol) influences the effect on the resident hand flora. Ten experiments with 200 reference disinfections were analyzed. Hands were washed for 1 min with soap. The bacterial prevalue was obtained by rubbing fingertips in tryptic soy broth for 1 min. After this, each subject treated the hands with n-propanol (60%, vol/vol) by using as many portions as necessary to keep hands wet for a total of 3 min. Bacterial postvalues (immediate effect) were obtained for one hand, and the other hand was gloved for 3 h. After the gloves were taken off, a second postvalue was obtained (sustained effect). Most surgical reference disinfections (73%) were achieved with 9 ml of the reference alcohol, followed by 12 ml (24%) and 6 ml (3%). There was no significant difference between the mean log10 reduction values for the three treatment groups, both in terms of the immediate effect (P = 0.333, as determined by analysis of variance) and in terms of the sustained effect (P = 0.442). A higher number of portions did not correlate with a higher reduction factor (for immediate effect, Pearson's correlation coefficient = −0.028 [P = 0.689]; for sustained effect, Pearson's correlation coefficient = 0.059 [P = 0.404]). If the hands were kept wet with the reference alcohol for the total application time, the applied volume could vary, but this did not alter the efficacy.


2020 ◽  
Vol 4 (7) ◽  
pp. OR1-OR4
Author(s):  
Rebecca Andrew ◽  
Sonia Narang ◽  
Srishti Aggarwal ◽  
Thongam S.

INTRODUCTION: Musculoskeletal disorders (MSDs) are one of the main reasons that force dentists to retire early from their practice. AIM: To assess the knowledge, awareness and behaviour among dental Interns in central and southern India regarding Ergonomics in DentistryMATERIALS AND METHOD: This cross-sectional study collected data using a questionnaire (pre-tested and pre-validated) amongst dental interns studying in various dental colleges in and around Central India. Participation in the study was voluntary and the questionnaire was divided into 4 sections with a total of 22 close ended questions. Data was anlayzed using SPSS version 21.0; descriptive statistics were applied followed by the unpaired samples t-test, Pearson’s correlation coefficient and multivariate logistic regression.RESULTS: The study consisted of 800 dentists, with most having fair knowledge (50.1%) and awareness (49.7%) regarding proper ergonomic posture (knowledge scores showed a significant statistical association). Most interns reported that they sometimes (41.5%) practiced dentistry ergonomically, while only 5.5% reported doing it always (significant difference, p=0.01*). A positive, linear, great strength of association (r: +0.7) and a significant relationship (p = 0.04) was found between knowledge and awareness scores using Pearson’s correlation coefficient. CONCLUSION: Dental awareness programmes are advised to educate dentists about the impending threat of MSDs if dentistry is not practiced ergonomically.


Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 106
Author(s):  
Daniela Platošová ◽  
Jiří Rusín ◽  
Jan Platoš ◽  
Kateřina Smutná ◽  
Roman Buryjan

The paper presents the results of a laboratory experiment of mesophilic single-stage anaerobic digestion performed to verify the possibility of early detection of process instability and reactor overload by evaluating the course of dissolved hydrogen concentration of the main intermediate. The digestion process was run in a Terrafors IS rotary drum bioreactor for 230 days. The substrate dosed on weekdays was food leftovers from the university canteen. At an average temperature of 37 °C, an organic loading of volatiles of 0.858 kg m−3 day−1 and a theoretical retention time of 259 days, biogas production of 0.617 Nm3 kg VS−1 was achieved with a CH4 content of 51.7 vol. %. The values of the established FOS/TAC stability indicator ranged from 0.26 to 11.4. The highest value was reached when the reactor was overloaded. The dissolved hydrogen concentration measured by the amperometric microsensor ranged from 0.039–0.425 mg dm−3. Data were statistically processed using Pearson’s correlation coefficient. The correlation of the hydrogen concentration with other parameters such as the concentration of organic acids was evaluated. The value of Pearson’s correlation coefficient was 0.331 and corresponded to a p-value of 0. The results confirmed a very low limit of the hydrogen concentration at which the microbial culture, especially methanogens, was already overloaded. The amperometric microsensor proved to be rather unsuitable for operational applications due to insufficient sensitivity and short service life. The newly designed ratio of dissolved hydrogen concentration to neutralizing capacity was tested but did not work significantly better than the established FOS/TAC stability indicator.


Work ◽  
2021 ◽  
pp. 1-7
Author(s):  
F. Magnifica ◽  
F. Colagrossi ◽  
A. Aloisi ◽  
S. Politi ◽  
A. Peretti ◽  
...  

BACKGROUND: Almost 25%of workers in the European Union suffer from back pain, and 23%complain of muscle pain. Sixty-two percent of workers carry out repetitive operations with their hands or arms, 46%work in painful or tired positions and 35%carry or handle loads. OBJECTIVE: This study aimed to translate, culturally adapt and validate the Italian version of the Cornell Musculoskeletal Discomfort Questionnaire (CMDQ-I). METHODS: Translation and cultural adaptation procedures followed international guidelines. Participants were recruited from among the personnel components of the Italian Air Force, who were between 18 and 65 years old. Cronbach’s alpha and the intraclass correlation coefficient (ICC) were calculated to assess internal consistency and stability, respectively. The CDMQ-I was administered together with the Visual Analogic Scale (VAS), and the validity was evaluated using Pearson’s correlation coefficient. RESULTS: All CDMQ-I items were either identical or similar in meaning to the original version’s items. The scale was administered twice with a retest after seven to 10 days to 66 participants. Cronbach’s alpha was higher than 0.761, and the ICC ranged between 0.737 and 0.952. Pearson’s correlation coefficient showed positive and significant correlations (p >  0.01). CONCLUSIONS: The study produced an Italian version of the CMDQ with good reliability and validity. This scale is a useful tool to investigate the frequency and intensity of musculoskeletal disorders in various categories of workers.


2021 ◽  
Vol 1 (1) ◽  
pp. 40-47
Author(s):  
Emilio Viktorov Mateev ◽  
Iva Valkova ◽  
Maya Georgieva ◽  
Alexander Zlatkov

Recently, the application of molecular docking is drastically increasing due to the rapid growth of resolved crystallographic receptors with co-crystallized ligands. However, the inability of docking softwares to correctly score the occurred interactions between ligands and receptors is still a relevant issue. This study examined the Pearson’s correlation coefficient between the experimental monoamine oxidase-B (MAO-B) inhibitory activity of 44 novel coumarins and the obtained GOLD 5.3 docking scores. Subsequently, optimization of the docking protocol was carried out to achieve the best possible pairwise correlation. Numerous modifications in the docking settings such as alteration in the scoring functions, size of the grid space, presence of active waters, and side-chain flexibility were conducted. Furthermore, ensemble docking simulations into two superimposed complexes were performed. The model was validated with a test set. A significant Pearson’s correlation coefficient of 0.8217 was obtained for the latter. In the final stage of our work, we observed the major interactions between the top-scored ligands and the active site of 1S3B.


2016 ◽  
Vol 33 (11) ◽  
pp. 2353-2372 ◽  
Author(s):  
Tammy M. Weckwerth ◽  
Kristy J. Weber ◽  
David D. Turner ◽  
Scott M. Spuler

AbstractA water vapor micropulse differential absorption lidar (DIAL) instrument was developed collaboratively by the National Center for Atmospheric Research (NCAR) and Montana State University (MSU). This innovative, eye-safe, low-power, diode-laser-based system has demonstrated the ability to obtain unattended continuous observations in both day and night. Data comparisons with well-established water vapor observing systems, including radiosondes, Atmospheric Emitted Radiance Interferometers (AERIs), microwave radiometer profilers (MWRPs), and ground-based global positioning system (GPS) receivers, show excellent agreement. The Pearson’s correlation coefficient for the DIAL and radiosondes is consistently greater than 0.6 from 300 m up to 4.5 km AGL at night and up to 3.5 km AGL during the day. The Pearson’s correlation coefficient for the DIAL and AERI is greater than 0.6 from 300 m up to 2.25 km at night and from 300 m up to 2.0 km during the day. Further comparison with the continuously operating GPS instrumentation illustrates consistent temporal trends when integrating the DIAL measurements up to 6 km AGL.


Sign in / Sign up

Export Citation Format

Share Document