scholarly journals High-Speed Turbo-TCM-Coded Orthogonal Frequency-Division Multiplexing Ultra-Wideband Systems

Author(s):  
Yanxia Wang ◽  
Libo Yang ◽  
Lei Wei
2019 ◽  
Vol 16 (2) ◽  
pp. 430-435
Author(s):  
N. Girinath

As the world moves toward 3G/4G there is a need for high data rate and relatively wide bandwidths. OFDM (Orthogonal Frequency Division Multiplexing) a form of multicarrier modulation technique is widely used to achieve high speed efficient data transmission at the rate of several Mbps. It is used in Wi-Fi standards like 802.11a, 802.11n, 802.11ac, broadcast standards like Digital Video Broadcast (DVB) and cellular telecommunications standard LTE. The main advantage of OFDM compared to single carrier modulation is their robustness to channel fading in wireless environment, high baud rates and less inter symbol interference. One major disadvantage is its High PAPR. PTS partial transmit sequences (PTS) and selective mapping are proposed to reduce it. Since FFT is core block of OFDM it must be able to adapt itself to ever changing digital world. A function specific reconfigurable 2k SDF (Single path delay feedback) FFT is proposed. It utilizes less power and can be configured for different FFT sizes ranging from 16-point to 1024-point. The validity and efficiency of the architecture have been verified by simulation in hardware description language VERILOG and targeted on Virtex-6 device. Finally PAPR is estimated by MATLAB simulation.


2014 ◽  
Vol 513-517 ◽  
pp. 3107-3110
Author(s):  
Zhang You Peng ◽  
Xu Liu ◽  
Xue Xia Zhong ◽  
Jian Wang ◽  
Yang Liu

In high-speed mobile Orthogonal Frequency Division Multiplexing (OFDM) cooperative system, direct channel signal presents a step change due to carriage loss, which interferes with signal reception. In the proposed system, spread spectrum is adopted at relay to separate the receiving mixed signals. Subsequently, the fading coefficient threshold of direct channel is obtained by simulating outage probability of direct channel. Finally, separated direct channel signal is selectively received based on the ratio relationship between its current fading coefficient and the obtained threshold. The proposed receiving strategy reduces Bit Error Rate compared with other receiving methods. Moreover, throughput of the proposed system increases when the fading coefficient is higher than threshold.


Author(s):  
Vo Trung Dung Huynh ◽  
Linh Mai ◽  
Hung Ngoc Do ◽  
Minh Ngoc Truong Nguyen ◽  
Trung Kien Pham

<span>High-speed Terahertz communication systems has recently employed orthogonal frequency division multiplexing approach as it provides high spectral efficiency and avoids inter-symbol interference caused by dispersive channels. Such high-speed systems require extremely high-sampling <br /> time-interleaved analog-to-digital converters at the receiver. However, timing mismatch of time-interleaved analog-to-digital converters significantly causes system performance degradation. In this paper, to avoid such performance degradation induced by timing mismatch, we theoretically determine maximum tolerable mismatch levels for orthogonal frequency division multiplexing communication systems. To obtain these levels, we first propose an analytical method to derive the bit error rate formula for quadrature and pulse amplitude modulations in Rayleigh fading channels, assuming binary reflected gray code (BRGC) mapping. Further, from the derived bit error rate (BER) expressions, we reveal a threshold of timing mismatch level for which error floors produced by the mismatch will be smaller than a given BER. Simulation results demonstrate that if we preserve mismatch level smaller than 25% of this obtained threshold, the BER performance degradation is smaller than 0.5 dB as compared to the case without timing mismatch.</span>


Sign in / Sign up

Export Citation Format

Share Document