frequency division multiplexing
Recently Published Documents


TOTAL DOCUMENTS

1584
(FIVE YEARS 362)

H-INDEX

40
(FIVE YEARS 6)

2022 ◽  
Vol 15 (3) ◽  
pp. 1-25
Author(s):  
Stefan Brennsteiner ◽  
Tughrul Arslan ◽  
John Thompson ◽  
Andrew McCormick

Machine learning in the physical layer of communication systems holds the potential to improve performance and simplify design methodology. Many algorithms have been proposed; however, the model complexity is often unfeasible for real-time deployment. The real-time processing capability of these systems has not been proven yet. In this work, we propose a novel, less complex, fully connected neural network to perform channel estimation and signal detection in an orthogonal frequency division multiplexing system. The memory requirement, which is often the bottleneck for fully connected neural networks, is reduced by ≈ 27 times by applying known compression techniques in a three-step training process. Extensive experiments were performed for pruning and quantizing the weights of the neural network detector. Additionally, Huffman encoding was used on the weights to further reduce memory requirements. Based on this approach, we propose the first field-programmable gate array based, real-time capable neural network accelerator, specifically designed to accelerate the orthogonal frequency division multiplexing detector workload. The accelerator is synthesized for a Xilinx RFSoC field-programmable gate array, uses small-batch processing to increase throughput, efficiently supports branching neural networks, and implements superscalar Huffman decoders.


Author(s):  
Vo Trung Dung Huynh ◽  
Linh Mai ◽  
Hung Ngoc Do ◽  
Minh Ngoc Truong Nguyen ◽  
Trung Kien Pham

<span>High-speed Terahertz communication systems has recently employed orthogonal frequency division multiplexing approach as it provides high spectral efficiency and avoids inter-symbol interference caused by dispersive channels. Such high-speed systems require extremely high-sampling <br /> time-interleaved analog-to-digital converters at the receiver. However, timing mismatch of time-interleaved analog-to-digital converters significantly causes system performance degradation. In this paper, to avoid such performance degradation induced by timing mismatch, we theoretically determine maximum tolerable mismatch levels for orthogonal frequency division multiplexing communication systems. To obtain these levels, we first propose an analytical method to derive the bit error rate formula for quadrature and pulse amplitude modulations in Rayleigh fading channels, assuming binary reflected gray code (BRGC) mapping. Further, from the derived bit error rate (BER) expressions, we reveal a threshold of timing mismatch level for which error floors produced by the mismatch will be smaller than a given BER. Simulation results demonstrate that if we preserve mismatch level smaller than 25% of this obtained threshold, the BER performance degradation is smaller than 0.5 dB as compared to the case without timing mismatch.</span>


Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 313
Author(s):  
Chin-Feng Lin ◽  
Cheng-Fong Wu ◽  
Ching-Lung Hsieh ◽  
Shun-Hsyung Chang ◽  
Ivan A. Parinov ◽  
...  

In this paper, a low-power underwater acoustic (UWA) image transceiver based on generalized frequency division multiplexing (GFDM) modulation for underwater communication is proposed. The proposed transceiver integrates a low-density parity-check code error protection scheme, adaptive 4-quadrature amplitude modulation (QAM) and 16-QAM strategies, GFDM modulation, and a power assignment mechanism in an UWA image communication environment. The transmission bit error rates (BERs), the peak signal-to-noise ratios (PSNRs) of the received underwater images, and the power-saving ratio (PSR) of the proposed transceiver obtained using 4-QAM and 16-QAM, with perfect channel estimation, and channel estimation errors (CEEs) of 5%, 10%, and 20% were simulated. The PSNR of the received underwater image is 44.46 dB when using 4-QAM with a CEE of 10%. In contrast, PSNR is 48.79 dB when using 16-QAM with a CEE of 10%. When BER is 10−4, the received UW images have high PSNR values and high resolutions, indicating that the proposed transceiver is suitable for underwater image sensor signal transmission.


2021 ◽  
Vol 20 ◽  
pp. 68-80
Author(s):  
Dia Mohamad Ali ◽  
Zhraa Zuheir Yahya

Filtered-orthogonal frequency division multiplexing (F-OFDM) is a quasi-orthogonal waveform candidate for the applications of the fifth generation (5G) communication system. In this study, an F-OFDM waveform with unequal sub-band sizes is proposed to improve the spectrum efficiency (SE) of the 5G system. The proposed waveform is modeled with the Blackman window-sinc filter and is developed based on the software-defined radio (SDR) technology for practical implementation. The result shows that the F-OFDM performance of the simulation and hardware implementation is approximately the same. The SE using the proposed F-OFDM waveform is 6% and 5.8% higher than the SE using the conventional OFDM waveform under the simulation in the LabVIEW NXG simulator and under the practical use in the universal software radio peripheral (USRP) platform, respectively.


2021 ◽  
Author(s):  
Jayashree Pradhan ◽  
Pratiksha Holey ◽  
Vinod Kiran Kappala ◽  
Santos Kumar Das

Abstract Visible light communication (VLC) is seeking a lot of attention in the recent years due to high bandwidth, low cost, ease of implementation. VLC can be used for illumination as well as communication at the same time. Light emitting diode (LED) acts as a transmitter for data transmission and photo detector is used at the receiver side. Intensity Modulation (IM) is used to convert electrical signal into optical signal where only real and positive signal need to be transmitted. Optical orthogonal frequency division multiplexing (O-OFDM) is used in the VLC to enhance the bandwidth limitation due to LED. Using OOFDM for VLC does not provide the massive connectivity in an multi-user environment. A Non orthogonal multiple access (NOMA) is the further expansion where user can use both the time and frequency resources but distinguished in power domain with successive interference cancellation (SIC) at the receiver to decode the signal of each user. Also, Asymmetrically clipped optical orthogonal frequency division multiplexing (ACO-OFDM) is used to get positive signal with enhanced spectral efficiency. The proposed method is evaluated analytically and using simulation in terms of bit error rate (BER).


2021 ◽  
Vol 1 (1) ◽  
pp. 1-10
Author(s):  
Ali A. Abdulhussein ◽  
Hikmat N. Abdullah

Filter Bank Multi-Carrier (FBMC) modulation is one of the most significant enablers for future 5G technologies. It is a modulation technique for resolving inter-carrier and inter-symbol interference using two possible methods: Frequency Spreading (FS) and Poly Phase (PP) implementation. Cyclic prefixes are used in OFDM for signal robustness, but they have some disadvantages in orthogonal frequency division multiplexing. FBMC is used to solve the disadvantages of OFDM and save a bandwidth.  In this paper, performance comparisons in terms of symbol error rate between OFDM and FBMC systems in AWGN and multipath fading channels are presented. The obtained results show that FBMC over performs OFDM in multipath fading channels and the improvement margin is increased as the number of subcarriers decreased.


Sign in / Sign up

Export Citation Format

Share Document