Fractional Order PID Controlled Interleaved Boost converter Fed Shunt Active Filter System

Author(s):  
Purigilla Venkata Ramkumar ◽  
Munagala Surya Kalavathi

Interleaved Boost Converter (ILBC) is a better converter between Photo Voltaic(PV) source and shunt active power filter. This paper deals with comparison of time domain outputs of PI and Fractional Order PID(FOPID) controlled ILBC fed shunt active filter in a grid connected PV system. The aim of this work is to minimize current ripple using ILBC between PV system and filter to improve the dynamic performance of shunt active filter. Closed loop monitored PI and FOPID systems are modeled, and the corresponding results are presented. MATLAB results of load voltage, current, converter voltage and currents with FOPID exhibits enhanced dynamic response. The proposed FOPID controlled ILBC Fed Shunt Active Filter system (ILBCFSAF) has advantages like low settling time, less peak over shoot and reduced steady state error in load voltage. The simulation results of ILBCSAF are compared with the corresponding hardware results.

2014 ◽  
Vol 23 (09) ◽  
pp. 1450132 ◽  
Author(s):  
G. VIJAYAKUMAR ◽  
R. ANITA

This paper presents an operation of photovoltaic (PV)-based shunt active filter (SAF) for significant energy conservation, harmonic mitigation and reactive power compensation. When the PV system generates excessive or equal power required to the load demand, then the coordinating logic disconnects the service grid from the load and with a consequent reduction of panel tariff and global warming gasses. The PV module is connected to the DC side of SAF through the DC–DC converter. Converter switch is controlled by fuzzy-based perturb & observe (P&O) maximum power point tracking (MPPT) algorithm and it eliminates the drawback in the conventional PV system. The reference currents are extracted by the fuzzy logic controller-based ICos Φ control strategy. This proposed PV-SAF, if connected at the terminals of a small industry or a home or a small enlightening institution can avoid the use of interruptible power supply and individual stabilizer. An emulation using MATLAB Simulink is presented to validate the advantage of the proposed system.


Sign in / Sign up

Export Citation Format

Share Document