Brain Computer Interface for Communication and Control of Peripherals and Appliances

2020 ◽  
Vol 17 (4) ◽  
pp. 1616-1621
Author(s):  
K. Sathish ◽  
Aritra Paul ◽  
Debapriya Roy ◽  
Ishmeet Kalra ◽  
Simran Bajaj
Keyword(s):  
Brain Computer Interface ◽  
Processing System ◽  
Audio Signal ◽  
Computer Interface ◽  
Single Frequency ◽  
Discrete Wavelet ◽  
Continuous Eeg ◽  
Transmission Reduction ◽  
The Subject ◽  
Simplified Solution

The concept is designed to improve upon the recent developed system, utilizing auditory steady state response (ASSR) as a basis for the Brain Computer Interface (BCI) paradigm. It utilizes the classification of signals through a discrete wavelet transform (DWT) before the actual transmission to reduce overhead at the processing system. The electroencephalogram (EEG) obtained from the subject is through a p300 based EEG receivers. A compression algorithm is used to reduce the bandwidth usage and provide a quicker transmission of the large and continuous EEG. An Arduino board along with a proximity sensor is used to detect the presence and distance of the subject and consequently control playback of a single frequency audio signal, which as received by the user, is used for producing the EEG signals. A continuous focus of the user is required on the playback of the single frequency sound to produce a sizeable reading. At the receiving end, another Arduino board is installed with an SD card module, which contains the commands, responsible for the actual control of the devices. The concept can be utilized for various purposes from controlling IoT based systems to wheelchairs and hospital beds as well as bionic limbs, which however are limited due to the overall bulk of all the equipment currently required. The main aim of this paper is to propose an improvement in the transmission, reduction the latency of the signals and to provide a concept for utilization by the handicapped or physically impaired patients. Since the EEG is obtained through the inner ear of the subject, it completely eliminates any need for invasive surgery and provides a simplified solution. Developments have shown to be able to achieve over 95% of accuracy in the domain, currently limited by length of the EEG required in order to process the actual commands from the subject’s brain.

scholarly journals Self-Paced (Asynchronous) BCI Control of a Wheelchair in Virtual Environments: A Case Study with a Tetraplegic

2007 ◽  
Vol 2007 ◽  
pp. 1-8 ◽  
Author(s):  
Robert Leeb ◽  
Doron Friedman ◽  
Gernot R. Müller-Putz ◽  
Reinhold Scherer ◽  
Mel Slater ◽  
...  
Keyword(s):  
Virtual Environments ◽  
Brain Computer Interface ◽  
Computer Interface ◽  
Beta Oscillations ◽  
Brain Waves ◽  
The Subject ◽  
First Time ◽  
Electroencephalogram Eeg ◽  
Spinal Cord Injured

The aim of the present study was to demonstrate for the first time that brain waves can be used by a tetraplegic to control movements of his wheelchair in virtual reality (VR). In this case study, the spinal cord injured (SCI) subject was able to generate bursts of beta oscillations in the electroencephalogram (EEG) by imagination of movements of his paralyzed feet. These beta oscillations were used for a self-paced (asynchronous) brain-computer interface (BCI) control based on a single bipolar EEG recording. The subject was placed inside a virtual street populated with avatars. The task was to “go” from avatar to avatar towards the end of the street, but to stop at each avatar and talk to them. In average, the participant was able to successfully perform this asynchronous experiment with a performance of 90%, single runs up to 100%.

Signal Processing and Classification for Electroencephalography Based Motor Imagery Brain Computer Interface

2021 ◽  
Vol 11 (12) ◽  
pp. 2918-2927
Author(s):  
A. Shankar ◽  
S. Muttan ◽  
D. Vaithiyanathan
Keyword(s):  
Neural Network ◽  
Signal Processing ◽  
Motor Imagery ◽  
Classification Accuracy ◽  
Brain Computer Interface ◽  
Computer Interface ◽  
Discrete Wavelet ◽  
Feature Sets ◽  
Evaluation Of Performance ◽  
The Brain

Brain Computer Interface (BCI) is a fast growing area of research to enable communication between our brains and computers. EEG based motor imagery BCI involves the user imagining movement, the subsequent recording and signal processing on the electroencephalogram signals from the brain, and the translation of those signals into specific commands. Ultimately, motor imagery BCI has the potential to be applied to helping those with special abilities recover motor control. This paper presents an evaluation of performance for EEG based motor imagery BCI with a classification accuracy of 80.2%, making use of features extracted using the Fast Fourier Transform and the Discrete Wavelet Transform, and classification is done using an Artificial Neural Network. It goes on to conclude how the performance is affected by the particular feature sets and neural network parameters.

EEG Feature Extraction and Pattern Classification Based on Motor Imagery in Brain-Computer Interface

2011 ◽  
Vol 3 (3) ◽  
pp. 43-56 ◽  
Author(s):  
Ling Zou ◽  
Xinguang Wang ◽  
Guodong Shi ◽  
Zhenghua Ma
Keyword(s):  
Support Vector Machine ◽  
Motor Imagery ◽  
Brain Computer Interface ◽  
Average Power ◽  
Computer Interface ◽  
Support Vector ◽  
Discrete Wavelet ◽  
Classification Rate ◽  
Linear Discriminant ◽  
Reconstructed Signal

Accurate classification of EEG left and right hand motor imagery is an important issue in brain-computer interface. Firstly, discrete wavelet transform method was used to decompose the average power of C3 electrode and C4 electrode in left-right hands imagery movement during some periods of time. The reconstructed signal of approximation coefficient A6 on the sixth level was selected to build up a feature signal. Secondly, the performances by Fisher Linear Discriminant Analysis with two different threshold calculation ways and Support Vector Machine methods were compared. The final classification results showed that false classification rate by Support Vector Machine was lower and gained an ideal classification results.

Identification of Disease Symptoms Using Taste Disorders in Electroencephalogram Signal

2020 ◽  
Vol 17 (5) ◽  
pp. 2051-2056
Author(s):  
Kalyana Sundaram Chandran ◽  
T. Kiruba Angeline
Keyword(s):  
Neural Control ◽  
Brain Computer Interface ◽  
Processing Technique ◽  
Computer Interface ◽  
Support Vector ◽  
Discrete Wavelet ◽  
Brain Wave ◽  
Disease Symptoms ◽  
Taste Disorders ◽  
The Brain

A Brain Computer Interface (BCI) is the one which converts the activity of the brain signals into useful and understandable signal. Brain computer interface is also called as Neural-Control Interface (NCI), Direct Neural Interface (DCI) or Brain Interface Machine (BMI). Electroencephalogram (EEG) based brain computer interfaces (BCI) is the technique used to measure the activity of the brain. Electroencephalography (EEG) is a brain wave monitoring and diagnosis. It is the measurement of electrical activity of the brain from the scalp. Taste sensations are important for our body to digest food. Identification of disease symptoms is based on the inhibition of different types of taste and by testing them to find the normality and abnormality of taste. The information is used in detection of disorder such as Parkinson’s disease etc. It is a source of reimbursement for better clinical diagnosis. Our brain continuously produces electrical signals when it operates. Those signals are measured with the equipment called Neurosky Mindwave Mobile headset. It is used to collect the real time brain signal samples. Neurosky is the equipment used in proposed work. Here the pre-processing technique is executed with median filtering. Feature extraction and classification is done with Discrete Wavelet Transform (DWT) and Support Vector Machine (SVM). It increases the performance accuracy. The SVM classification accuracy achieved by this work is 90%. The sensitivity achieved is higher and the specificity is about 80%. We can able to predict the taste disorders using this methodology.

scholarly journals A Novel Design of 4-Class BCI Using Two Binary Classifiers and Parallel Mental Tasks

2008 ◽  
Vol 2008 ◽  
pp. 1-5 ◽  
Author(s):  
Tao Geng ◽  
John Q. Gan ◽  
Matthew Dyson ◽  
Chun SL Tsui ◽  
Francisco Sepulveda
Keyword(s):  
Brain Computer Interface ◽  
Computer Interface ◽  
Classification Algorithms ◽  
Single Trial ◽  
Linear Discriminant ◽  
The Subject ◽  
Offline Analysis ◽  
Binary Classifiers ◽  
Novel Design ◽  
Mental Tasks

A novel 4-class single-trial brain computer interface (BCI) based on two (rather than four or more) binary linear discriminant analysis (LDA) classifiers is proposed, which is called a “parallel BCI.” Unlike other BCIs where mental tasks are executed and classified in a serial way one after another, the parallel BCI uses properly designed parallel mental tasks that are executed on both sides of the subject body simultaneously, which is the main novelty of the BCI paradigm used in our experiments. Each of the two binary classifiers only classifies the mental tasks executed on one side of the subject body, and the results of the two binary classifiers are combined to give the result of the 4-class BCI. Data was recorded in experiments with both real movement and motor imagery in 3 able-bodied subjects. Artifacts were not detected or removed. Offline analysis has shown that, in some subjects, the parallel BCI can generate a higher accuracy than a conventional 4-class BCI, although both of them have used the same feature selection and classification algorithms.

Channel Selection and Feature Extraction of ECoG-Based Brain-Computer Interface Using Band Power

2010 ◽  
Vol 44-47 ◽  
pp. 3564-3568 ◽  
Author(s):  
Hai Bin Zhao ◽  
Chong Liu ◽  
Chun Yang Yu ◽  
Hong Wang
Keyword(s):  
Feature Extraction ◽  
Brain Computer Interface ◽  
Channel Selection ◽  
Computer Interface ◽  
Fisher Linear Discriminant ◽  
Data Set ◽  
Linear Discriminant ◽  
Distinctive Features ◽  
The Subject ◽  
Components Analysis

Electrocorticography (ECoG) signals have been proved to be associated with different types of motor imagery and have used in brain-computer interface (BCI) research. This paper studies the channel selection and feature extraction using band powers (BP) for a typical ECoG-based BCI system. The subject images movement of left finger or tongue. Firstly, BP features were used for channel selection, and 11 channels which had distinctive features were selected from 64 channels. Then, the features of ECoG signals were extracted using BP, and the dimension of feature vector was reduced with principal components analysis (PCA). Finally, Fisher linear discriminant analysis (LDA) was used for classification. The results of the experiment showed that this algorithm has got good classification accuracy for the test data set.

scholarly journals Using Common Spatial Patterns to Select Relevant Pixels for Video Activity Recognition

2020 ◽  
Vol 10 (22) ◽  
pp. 8075
Author(s):  
Itsaso Rodríguez-Moreno ◽  
José María Martínez-Otzeta ◽  
Basilio Sierra ◽  
Itziar Irigoien ◽  
Igor Rodriguez-Rodriguez ◽  
...  
Keyword(s):  
Activity Recognition ◽  
Autonomous Navigation ◽  
Brain Computer Interface ◽  
Video Recording ◽  
Video Camera ◽  
Computer Interface ◽  
Important Research ◽  
New Approach ◽  
The Subject ◽  
Camera Surveillance

Video activity recognition, despite being an emerging task, has been the subject of important research due to the importance of its everyday applications. Video camera surveillance could benefit greatly from advances in this field. In the area of robotics, the tasks of autonomous navigation or social interaction could also take advantage of the knowledge extracted from live video recording. In this paper, a new approach for video action recognition is presented. The new technique consists of introducing a method, which is usually used in Brain Computer Interface (BCI) for electroencephalography (EEG) systems, and adapting it to this problem. After describing the technique, achieved results are shown and a comparison with another method is carried out to analyze the performance of our new approach.

scholarly journals An Efficient and High Accuracy P300 Detection for Brain Computer Interface System Based on Kernel Principal Component Analysis

2021 ◽  
Author(s):  
Mohammad Farukh Hashmi Mohammad Farukh Hashmi ◽  
Jagdish D.Kene Jagdish D.Kene ◽  
Deepali M.Kotambkar Deepali M.Kotambkar ◽  
Praveen Matte Praveen Matte ◽  
Avinash G.Keskar Avinash G.Keskar
Keyword(s):  
Principal Component Analysis ◽  
Brain Computer Interface ◽  
Principal Component ◽  
Component Analysis ◽  
Computer Interface ◽  
Kernel Principal Component Analysis ◽  
Support Vector ◽  
Discrete Wavelet ◽  
Single Trial ◽  
High Level

Abstract Human machine interaction with the use of brain signals has been made possible by the advent of the technology popularly known as brain computer interface (BCI). P300 is one such brain signal which is used in many BCI systems. The problems associated with most of the existing P300 detection methods are that they are time consuming and computationally complex as they follow the procedure of averaging the values obtained from multiple trials. Also the existing single trial methods have been able to obtain only moderate accuracy levels. In this paper, a novel approach which for achieving a high level of accuracy has been proposed for single trial P300 signal detection amidst noise and artifacts. In this method features were obtained by applying Discrete Wavelet Transform followed by a technique making use of the obtained wavelet coefficients. Kernel Principal Component Analysis (KPCA) was used for reducing the feature dimension. Classification of the P300 signal using the reduced features was done using Support Vector Machine (SVM). The Dataset used was the Dataset II of the third BCI Competition. An accuracy of 98.53% was achieved for Subject S1 (signal obtained from the first person) and 99.25% for Subject S2 (signal obtained from the second person) by using the proposed method. A high level of accuracy was obtained, as compared to many existing techniques. Also the speed of classification was improved with the use of reduced feature dimensions.

HYBRID BRAIN–COMPUTER INTERFACE PARADIGM — A STUDY

2018 ◽  
Vol 30 (03) ◽  
pp. 1850022 ◽  
Author(s):  
Rajesh Singla
Keyword(s):  
Information Transfer ◽  
Brain Computer Interface ◽  
Event Related Potential ◽  
Computer Interface ◽  
Training Procedure ◽  
Information Transfer Rate ◽  
Activation Rate ◽  
The Subject ◽  
External Stimuli

The advancements in the field of brain–computer interface (BCI) are driven by the underlying motive of improving quality of life for both healthy as well as locked in subjects. Since BCI’s are based on the response of the human brain to training or external stimuli, the improvement in terms of performance can be achieved by either enhancing the subject training procedure or by improving the external stimuli to produce maximized event related potential (ERP). P300 and steady-state visually evoked potential (SSVEP) approaches have been the most common paradigms used for stimulus-based BCI’s world over. But recently, a large number of researchers are facing a problem of BCI illiteracy in subjects, where some of the subjects showed ineffective results while training with these BCI as independent stimuli. The concept of hybrid brain–computer interface (hBCI) is a step towards eradicating this problem. Our research deals with external stimuli-based ERP generation where we discuss and compare with experimentation, three different options of visual stimulus: conventional SSVEP stimulus, P300-SSVEP hybrid stimulus, distinct target colors for P300-SSVEP-based hybrid stimulus. This paper introduces a novel hBCI paradigm and discusses the validation of improved results by comparing with the already existing stimuli options. The parameters of comparison that were considered to validate our proposal were decision accuracy (Acc), information transfer rate (ITR) and false activation rate (FAR).

Sign in / Sign up

Export Citation Format

Share Document