Hydromagnetic Effects on Hybrid Nanofluid (Cu–Al2O3/Water) Flow with Convective Heat Transfer Due to a Stretching Sheet

2020 ◽  
Vol 9 (4) ◽  
pp. 293-301
Author(s):  
V. Rajesh ◽  
M. Srilatha ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Stretching Sheet ◽  
Numerical Technique ◽  
Physical Parameters ◽  
Hybrid Nanofluid ◽  
Convective Boundary ◽  
Layer Flow ◽  
Field Setting

In this paper, transient free convective boundary layer flow of a viscous hybrid nanofluid due to a vertical stretching sheet with MHD effects is studied numerically using the Crank Nicolson finite difference numerical technique. To explore the properties of heat transfer and the flow field due to a vertical stretching sheet in the existence of a Lorentz force, two different fluids, specifically Cu–Al2O3/water and Cu/water, are utilized. The results of different physical parameters and the practical quantities of concern that they affect are investigated. According to this article’s results, Cu–Al2O3/water has a superior heat transfer rate than Cu/water in a magnetic field setting. Various other nano mixtures can be attempted to attain the optimal heat transfer rate.

Numerical Investigation of Hydromagnetic Hybrid Cu – Al2O3/Water Nanofluid Flow over a Permeable Stretching Sheet with Suction

2016 ◽  
Vol 17 (5) ◽  
pp. 249-257 ◽  
Author(s):  
S. P. Anjali Devi ◽  
S. Suriya Uma Devi
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Stretching Sheet ◽  
Physical Parameters ◽  
Hybrid Nanofluid ◽  
Heat Transfer Fluids ◽  
Field Environment ◽  
Improved Model

AbstractAn emerging concept of hybrid nanofluid with a new improved model of its thermophysical properties are introduced in the present work. Hybrid nanofluid is an advanced type of conventional heat transfer fluids, which has been employed for the enhancement of heat transfer rate. Two distinct fluids, namely hybrid nanofluid $({\rm{Cu - A}}{{\rm{l}}_{\rm{2}}}{{\rm{O}}_{\rm{3}}}{\rm{/water}})$ and nanofluid (Cu/water) are used to investigate the parametric features of the flow and heat transfer phenomena over a permeable stretching sheet in the presence of magnetic field. The effects of various physical parameters and effecting physical quantities of interest are analyzed. From this study it is observed that the heat transfer rate of hybrid nanofluid $({\rm{Cu - A}}{{\rm{l}}_{\rm{2}}}{{\rm{O}}_{\rm{3}}}{\rm{/water}})$ is higher than that of Nanofluid (Cu/water) under magnetic field environment. More combinations of different nanocomposites can be tried so that the desired heat transfer rate can be achieved.

Numerical investigation of three-dimensional hybrid Cu–Al2O3/water nanofluid flow over a stretching sheet with effecting Lorentz force subject to Newtonian heating

2016 ◽  
Vol 94 (5) ◽  
pp. 490-496 ◽  
Author(s):  
S. Suriya Uma Devi ◽  
S.P. Anjali Devi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Lorentz Force ◽  
Transfer Rate ◽  
Three Dimensional ◽  
Physical Parameters ◽  
Hybrid Nanofluid ◽  
Newtonian Heating ◽  
Layer Flow ◽  
Numerical Parametric Study

This work compares the heat transfer characteristics of traditional nanofluid with that of emerging hybrid nanofluid. Hybrid nanofluid, a new type of conventional fluid, has been used toward the enhancement of heat transfer in the boundary layer flow. A new model of thermophysical properties is employed to investigate the effects of Lorentz force over a three-dimensional stretching surface subject to Newtonian heating. Comparisons are obtained through the numerical parametric study, which has been carried out to explore the effects of various physical parameters involved in the problem. From this study it is observed that the heat transfer rate of hybrid nanofluid (Cu–Al2O3/water) is higher than nanofluid (Cu/water) even in the presence of a magnetic field environment. By opting to use different and appropriate nanoparticle proportions in hybrid nanofluid, the desired heat transfer rate can be achieved.

MHD hybrid nanofluid flow with convective heat transfer over a permeable stretching/shrinking surface with radiation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nur Syahirah Wahid ◽  
Norihan Md Arifin ◽  
Najiyah Safwa Khashi'ie ◽  
Ioan Pop ◽  
Norfifah Bachok ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Hybrid Nanofluid ◽  
Convective Boundary Conditions ◽  
Nanofluid Flow ◽  
Convective Boundary ◽  
Content Type ◽  
Shrinking Surface

Purpose The purpose of this paper is to numerically investigate the hybrid nanofluid flow with the imposition of magnetohydrodynamic (MHD) and radiation effects alongside the convective boundary conditions over a permeable stretching/shrinking surface. Design/methodology/approach The mathematical model is formulated in the form of partial differential equations (PDEs) and are then transformed into the form of ordinary differential equations (ODEs) by using the similarity variables. The deriving ODEs are solved numerically by using the bvp4c solver in MATLAB software. Stability analysis also has been performed to determine the stable solution among the dual solutions obtain. For method validation purposes, a comparison of numerical results has been made with the previous studies. Findings The flow and the heat transfer of the fluid at the boundary layer are described through the plot of the velocity profile, temperature profile, skin friction coefficient and local Nusselt number that are presented graphically. Dual solutions are obtained, but only the first solution is stable. For the realizable solution at the shrinking surface, the proliferation of nanoparticle volume fraction (copper) and magnetic (magnetohydrodynamics) parameters can impede the boundary layer separation. Also, Biot number could enhance the temperature profile and the heat transfer rate at the shrinking surface region. The incrementation of 0.1% of Biot number has enhanced the heat transfer rate by approximately 0.1% and the incrementation of 0.5% volume fraction for copper has reduced the heat transfer rate by approximately 0.17%. Originality/value The presented model and numerical results are original and new. It can be used as a future reference for further investigation and related practical application. The main contribution of this investigation includes giving the initial prediction and providing the numerical data for the other researchers for their future reference regarding the impacts of nanoparticles volumetric concentration towards the main physical quantities of interest in the presence of magnetic and radiation parameters with the convective boundary conditions.

Non-axisymmetric Homann stagnation point flow and heat transfer past a stretching/shrinking sheet using hybrid nanofluid

2020 ◽  
Vol 30 (10) ◽  
pp. 4583-4606 ◽  
Author(s):  
Najiyah Safwa Khashi’ie ◽  
Norihan Md Arifin ◽  
Ioan Pop ◽  
Roslinda Nazar ◽  
Ezad Hafidz Hafidzuddin ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Strain Rate ◽  
Stagnation Point ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Hybrid Nanofluid ◽  
Ambient Fluid ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This paper aims to scrutinize the analysis of non-axisymmetric Homann stagnation point flow and heat transfer of hybrid Cu-Al2O3/water nanofluid over a stretching/shrinking flat plate. Design/methodology/approach The similarity transformation which fulfils the continuity equation is opted to transform the coupled momentum and energy equations into the nonlinear ordinary differential equations. Numerical solutions which are elucidated in the tables and graphs are obtained using the bvp4c solver. Findings Non-unique solutions (first and second) are feasible for both stretching and shrinking cases within the specific values of the parameters. First solution is the physical/real solution based on the execution of stability analysis. An upsurge of the ratio of the ambient fluid strain rate to the plate strain rate can delay the boundary layer separation, whereas a boost of the ratio of the ambient fluid shear rate to the plate strain rate only accelerates the separation of boundary layer. The heat transfer rate of hybrid nanofluid is greater for the stretching case than the shrinking case. However, for the shrinking case, the heat transfer rate intensifies with the increment of the copper (Cu) nanoparticles volume fraction, whereas a contrary result is found for the stretching case. Originality/value The present numerical results are original and new. It can contribute to other researchers on electing the relevant parameters to optimize the heat transfer process in the modern industry, and the right parameters to generate non-unique solution so that no misjudgment on flow and heat transfer features.

Unsteady axisymmetric flow and heat transfer of a hybrid nanofluid over a permeable stretching/shrinking disc

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Najiyah Safwa Khashi'ie ◽  
Norihan M. Arifin ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Axisymmetric Flow ◽  
Hybrid Nanofluid ◽  
Uniqueness Of Solutions ◽  
Suction Parameter ◽  
Content Type ◽  
Comparison Results

Purpose This study aims to analyze the unsteady flow of hybrid Cu-Al2O3/water nanofluid over a permeable stretching/shrinking disc. The analysis of flow stability is also purposed because of the non-uniqueness of solutions. Design/methodology/approach The reduced differential equations (similarity) are solved numerically using the aid of bvp4c solver (Matlab). Two types of thermophysical correlations for hybrid nanofluid (Type 1 and 2) are adopted for the comparison results. Using correlation Type 1, the heat transfer and flow analysis including the profiles (velocity and temperature) are presented in the figures and tables with different values control parameters. Three sets of hybrid nanofluid are analyzed: Set 1 (1% Al2O3 + 1% Cu), Set 2 (0.5% Al2O3 + 1% Cu) and Set 3 (1% Al2O3 + 0.5% Cu). Findings The comparison of numerical values between present (Types 1 and 2 correlations) and previous (Type 2 correlations) results are in a good compliance with approximate percent relative error. The appearance of two solutions is noticed when the suction parameter is considered and the unsteady parameter is less than 0 (decelerating flow) for both stretching and shrinking disc while only one solution is possible for steady flow. The hybrid nanofluid in Set 1 can delay the separation of boundary layer but the hybrid nanofluid in Set 3 has the greatest heat transfer rate. Moreover, the inclusion of wall mass suction for stretching case can generate a significant increment of heat transfer rate approximately 90% for all fluids (water, single and hybrid nanofluids). Originality/value The present findings are novel and can be a reference point to other researchers to further analyze the heat transfer performance and stability of the working fluids.

scholarly journals Mixed convective hybrid nanofluid flow in lid-driven undulated cavity: effect of MHD and Joule heating

2019 ◽  
Vol 16 (2) ◽  
pp. 109-126 ◽  
Author(s):  
Ishrat Zahan ◽  
R Nasrin ◽  
M A Alim
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Heat Transfer Rate ◽  
Joule Heating ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Hybrid Nanoparticles ◽  
Wave Number ◽  
Hybrid Nanofluid

A numerical analysis has been conducted to show the effects of magnetohydrodynamic (MHD) and Joule heating on heat transfer phenomenon in a lid driven triangular cavity. The heat transfer fluid (HTF) has been considered as water based hybrid nanofluid composed of equal quantities of Cu and TiO2 nanoparticles. The bottom wall of the cavity is undulated in sinusoidal pattern and cooled isothermally. The left vertical wall of the cavity is heated while the inclined side is insulated. The two dimensional governing partial differential equations of heat transfer and fluid flow with appropriate boundary conditions have been solved by using Galerkin's finite element method built in COMSOL Multyphysics. The effects of Hartmann number, Joule heating, number of undulation and Richardson number on the flow structure and heat transfer characteristics have been studied in details. The values of Prandtl number and solid volume fraction of hybrid nanoparticles have been considered as fixed. Also, the code validation has been shown. The numerical results have been presented in terms of streamlines, isotherms and average Nusselt number of the hybrid nanofluid for different values of governing parameters. The comparison of heat transfer rate by using hybrid nanofluid, Cu-water nanofluid,  TiO2 -water nanofluid and clear water has been also shown. Increasing wave number from 0 to 3 enhances the heat transfer rate by 16.89%. The enhanced rate of mean Nusselt number for hybrid nanofluid is found as 4.11% compared to base fluid.

Cooling of a Hot Torus

2015 ◽  
Vol 138 (4) ◽  
Author(s):  
Rajai S. Alassar ◽  
Mohammed A. Abushoshah
Keyword(s):  
Heat Transfer ◽  
Aspect Ratio ◽  
Boundary Conditions ◽  
Heat Transfer Rate ◽  
Governing Equation ◽  
Transfer Rate ◽  
Radial Direction ◽  
Convective Boundary Conditions ◽  
Convective Boundary ◽  
Toroidal Coordinates

The problem of a hot torus left to cool in a medium of known temperature is studied. We write the governing equation in toroidal coordinates and expand the temperature in terms of a series in the angular direction. The resulting modes in the radial direction are numerically obtained. We consider both isothermal and convective boundary conditions and study the effect of Biot number and aspect ratio on the heat transfer rate.

scholarly journals Squeezed Hybrid Nanofluid Flow Over a Permeable Sensor Surface

Mathematics ◽  
2020 ◽  
Vol 8 (6) ◽  
pp. 898 ◽  
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Dual Solutions ◽  
Hybrid Nanoparticles ◽  
Squeeze Flow ◽  
Flow Index ◽  
Hybrid Nanofluid ◽  
Sensor Surface ◽  
Nanofluid Flow

This paper examines the squeezed hybrid nanofluid flow over a permeable sensor surface with magnetohydrodynamics (MHD) and radiation effects. The alumina (Al2O3) and copper (Cu) are considered as the hybrid nanoparticles, while water is the base fluid. The governing equations are reduced to the similarity equations, using the similarity transformation. The resulting equations are programmed in Matlab software through the bvp4c solver to obtain the numerical solutions. It was found that the heat transfer rate was greater for the hybrid nanofluid, compared to the regular nanofluid. It was observed that dual solutions exist for some values of the permeable parameter S. The upper branch solutions of the skin friction coefficient ( Re x 1 / 2 C f ) and the heat transfer rate at the surface ( Re x − 1 / 2 N u x ) enhance with the added Cu nanoparticle ( φ 2 ) and for larger magnetic strength ( M ). Moreover, the values of Re x 1 / 2 C f decrease, whereas the values of Re x − 1 / 2 N u x increase for both branches, with the rise of the squeeze flow index ( b ). Besides, an increment of the heat transfer rate at the sensor surface for both branches was observed in the presence of radiation ( R ). Temporal stability analysis was employed to determine the stability of the dual solutions, and it was discovered that only one of them was stable and physically reliable as time evolves.

scholarly journals Hybrid Nanofluid Flow Past a Permeable Moving Thin Needle

Mathematics ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 612 ◽  
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Brownian Motion ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Temporal Stability ◽  
Skin Friction Coefficient ◽  
Hybrid Nanoparticles ◽  
Problem Solver ◽  
Hybrid Nanofluid ◽  
Nanoparticle Concentration

The problem of a steady flow and heat transfer past a permeable moving thin needle in a hybrid nanofluid is examined in this study. Here, we consider copper (Cu) and alumina (Al2O3) as hybrid nanoparticles, and water as a base fluid. In addition, the effects of thermophoresis and Brownian motion are taken into consideration. A similarity transformation is used to obtain similarity equations, which are then solved numerically using the boundary value problem solver, bvp4c available in Matlab software (Matlab_R2014b, MathWorks, Singapore). It is shown that heat transfer rate is higher in the presence of hybrid nanoparticles. It is discovered that the non-uniqueness of the solutions is observed for a certain range of the moving parameter λ . We also observed that the bifurcation of the solutions occurs in the region of λ < 0 , i.e., when the needle moved toward the origin. Furthermore, we found that the skin friction coefficient and the heat transfer rate at the surface are higher for smaller needle sizes. A reduction in the temperature and nanoparticle concentration was observed with the increasing of the thermophoresis parameter. It was also found that the increase of the Brownian motion parameter leads to an increase in the nanoparticle concentration. Temporal stability analysis shows that only one of the solutions was stable and physically reliable as time evolved.

Sign in / Sign up

Export Citation Format

Share Document