Electrochemical Sensor for Acetaminophen Based on a Poly(diphenylamine sulfonic acid) Modified Sensor

2020 ◽  
Vol 18 (10) ◽  
pp. 739-744
Author(s):  
Gamze Erdogdu
Keyword(s):  
Sulfonic Acid ◽  
Limit Of Detection ◽  
Differential Pulse ◽  
Carbon Electrode ◽  
Buffer Solution ◽  
Real Samples ◽  
Oxidation Current ◽  
Pulse Voltammetry ◽  
Modified Sensor

A sensitive and simple modified sensor was prepared by electrodeposition of diphenylamine sulfonic acid (DPSA) to the glassy carbon electrode surface by cyclic voltammetry (CV) technique. The electrooxidation of Acetaminophen (AC) was accomplished by CV and differential pulse voltammetry at poly(DPSA) modified sensor. As a result of the findings, the current values were enhanced and both substances were separated at the modified sensor compared to the bare electrode. There was linearly between the oxidation current and concentration of AC from 0.0 to 100 μM in phospate buffer solution at pH 7.0. The limit of detection was 3.0 nM and the sensitivity was 0.4108 μA/μM. The determination of AC was successfully and satisfactorily carried out in real samples such as human blood serum and urine at the poly(DPSA) sensor. To the best knowledge of this work, this is the first study that detect the AC in the presence of ascorbic acid at poly(DPSA) sensor in the literature.

Sensitive Determination of Epinephrine in the Presence of Ascorbic Acid at Poly(diphenylamine sulfonic acid) Modified Sensor

2020 ◽  
Vol 18 (4) ◽  
pp. 253-258
Author(s):  
Gamze Erdoğdu
Keyword(s):  
Ascorbic Acid ◽  
Sulfonic Acid ◽  
Limit Of Detection ◽  
Phosphate Buffer Solution ◽  
Differential Pulse ◽  
Buffer Solution ◽  
Sensitive Determination ◽  
Pulse Voltammetry ◽  
Modified Sensor

A sensitive and simple modified sensor was prepared by electrodeposition of diphenylamine sulfonic acid (DPSA) to the glassy carbon electrode surface by cyclic voltammetry (CV) technique. The electrooxidation of epinephrine (EP) was accomplished by CV and differential pulse voltammetry at poly(DPSA) modified sensor. As a result of the findings, the current values were enhanced and both substances were separated at the modified sensor compared to the bare electrode. There was linearly between the oxidation current and concentration of EP from 0.2 to 100 μM in phosphate buffer solution at pH 7.0. The limit of detection was 5.0 nM and the sensitivity was 0.4205 μA/μM. The determination of EP was successfully and satisfactorily carried out in real samples such as human blood serum and urine at the poly(DPSA) sensor. To the best knowledge of this work, this is the first study that detect the EP in the presence of ascorbic acid at poly(DPSA) sensor in the literature.

Electrochemical Determination of Norepinephrine at Poly (p-aminobenzenesulfonic Acid) Modified Sensor

2020 ◽  
Vol 16 (5) ◽  
pp. 591-600
Author(s):  
Şevket Zişan Yağcı ◽  
Ebru Kuyumcu Savan ◽  
Gamze Erdoğdu
Keyword(s):  
Ascorbic Acid ◽  
Limit Of Detection ◽  
Phosphate Buffer Solution ◽  
Differential Pulse ◽  
Electrochemical Determination ◽  
Buffer Solution ◽  
Oxidation Current ◽  
Pulse Voltammetry ◽  
Modified Sensor

Objective: In this study, it was aimed to prepare an electrochemical sensor capable of assigning Norepinephrine in the presence of an interference such as ascorbic acid. Methods: A sensitive modified sensor was prepared by electrodeposition of p-aminobenzenesulfonic acid (p-ABSA) to the glassy carbon electrode by cyclic voltammetry. The electrooxidation of Norepinephrine was accomplished by cyclic and differential pulse voltammetry. Results: The current values were enhanced and the peak potentials of Norepinephrine and ascorbic acid were separated at the sensor compared to the bare electrode. There was linearity between the oxidation current and concentration of Norepinephrine ranging from 0.5 to 99.8 μM in phosphate buffer solution at pH 7.0. The limit of detection was 10.0 nM and the sensitivity was 0.455 μA/μM. Conclusion: The determination of Norepinephrine was successfully performed in real samples such as blood serum and urine at the poly (p-ABSA) sensor. To the best of our knowledge, this is the first study to detect Norepinephrine in the presence of ascorbic acid at poly (p-ABSA) modified sensor in the literature.

Electrochemical characterization of luminol and its determination in real samples

2014 ◽  
Vol 6 (19) ◽  
pp. 7809-7813 ◽  
Author(s):  
Gulcemal Yildiz ◽  
Ugur Tasdoven ◽  
Necati Menek
Keyword(s):  
Cyclic Voltammetry ◽  
Glassy Carbon ◽  
Electrochemical Behavior ◽  
Differential Pulse ◽  
Carbon Electrode ◽  
Buffer Solution ◽  
Solution Ph ◽  
Real Samples ◽  
Pulse Voltammetry

The electrochemical behavior of luminol, an important molecule in forensic science, was studied in Britton–Robinson buffer solution (pH 2–pH 13) at a glassy carbon electrode using cyclic voltammetry and differential pulse voltammetry techniques.

scholarly journals Simultaneous electrochemical sensing of dihydroxy benzene isomers at cost-effective allura red polymeric film modified glassy carbon electrode

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Pattan-Siddappa Ganesh ◽  
Ganesh Shimoga ◽  
Seok-Han Lee ◽  
Sang-Youn Kim ◽  
Eno E. Ebenso
Keyword(s):  
Glassy Carbon Electrode ◽  
Glassy Carbon ◽  
Limit Of Detection ◽  
Tap Water ◽  
Differential Pulse ◽  
Oxidation Potential ◽  
Electrochemical Sensing ◽  
Carbon Electrode ◽  
Buffer Solution ◽  
Allura Red

Abstract Background A simple and simultaneous electrochemical sensing platform was fabricated by electropolymerization of allura red on glassy carbon electrode (GCE) for the interference-free detection of dihydroxy benzene isomers. Methods The modified working electrode was characterized by electrochemical and field emission scanning electron microscopy methods. The modified electrode showed excellent electrocatalytic activity for the electrooxidation of catechol (CC) and hydroquinone (HQ) at physiological pH of 7.4 by cyclic voltammetric (CV) and differential pulse voltammetric (DPV) techniques. Results The effective split in the overlapped oxidation signal of CC and HQ was achieved in a binary mixture with peak to peak separation of 0.102 V and 0.103 V by CV and DPV techniques. The electrode kinetics was found to be adsorption-controlled. The oxidation potential directly depends on the pH of the buffer solution, and it witnessed the transfer of equal number of protons and electrons in the redox phenomenon. Conclusions The limit of detection (LOD) for CC and HQ was calculated to be 0.126 μM and 0.132 μM in the linear range of 0 to 80.0 μM and 0 to 110.0 μM, respectively, by ultra-sensitive DPV technique. The practical applicability of the proposed sensor was evaluated for tap water sample analysis, and good recovery rates were observed. Graphical abstract Electrocatalytic interaction of ALR/GCE with dihydroxy benzene isomers.

scholarly journals Carvacrol electrochemical reaction characteristics on screen printed electrode modified with La2O3/Co3O4 nanocomposite

2019 ◽  
Vol 9 (2) ◽  
pp. 113-123 ◽  
Author(s):  
Sayed Zia Mohammadi ◽  
Hadi Beitollahi ◽  
Tahereh Rohani ◽  
Hossein Allahabadi
Keyword(s):  
Limit Of Detection ◽  
Phosphate Buffer Solution ◽  
Differential Pulse ◽  
Co3o4 Nanoparticles ◽  
Electrochemical Characteristics ◽  
Screen Printed Electrode ◽  
Buffer Solution ◽  
Voltammetric Techniques ◽  
Screen Printed

Electrochemical characteristics of carvacrol were investigated on a screen-printed electrode (SPE) modified with La2O3/Co3O4 nanocomposite by using voltammetric techniques, which displayed a well-defined peak for sensitive carvacrol determination in phosphate buffer solution (PBS) at pH 7.0. La2O3/Co3O4 nanoparticles demonstrated suitable catalytic activity for carvacrol determination by differential pulse voltammetry (DPV) technique. Besides, determination of carvacrol in a real samples was recognized in the light of electrochemical findings and a validated voltammetric technique for quantitative analysis of carvacrol in a real formulation was proposed. The DPV peak currents were found to be linear in the concentration range of 10.0 to 800.0 μM. The limit of detection (LOD) was found to be 1.0 μM.

Sign in / Sign up

Export Citation Format

Share Document