Determination of Simvastatin by Voltammetry Method at Screen-Printed Electrode Modified by Graphene Oxide Nanosheets and Sodium Dodecyl Sulfate

An accurate, rapid, simple, and novel technique was developed to determine simvastatin (SMV). In this research, a screen-printed electrode (SPE) was deposited with graphene oxide (GO) and sodium dodecyl sulfate (SDS), respectively. For the first time, the handmade modified SPE measured the SMV by differential pulse voltammetry (DPV) with high sensitivity and selectivity. The results of cyclic voltammetry indicated the oxidation irreversible process of SMV. Various parameters (pH, concentration, scan rate, support electrolyte) were performed to optimize the conditions for the determination of SMV. Under the optimum experiment condition of 0.1 M KNO3 as support electrolyte and pH 7.0, the linear range was achieved for SMV concentration from 1.8 to 36.6 µM with a limit of detection (LOD), and a limit of quantitation (LOQ) of 0.06 and 1.8 µM, respectively. The proposed method was successfully utilized to determine SMV in tablets and urine samples with a satisfactory recovery in the range of 96.2 to 103.3%.

Synthesis and Characterization of GO/ZIF-67 Nanocomposite: Investigation of Catalytic Activity for the Determination of Epinine in the Presence of Dobutamine

In this study, we prepared graphene oxide (GO)/ZIF-67 nanocomposites. Therefore, GO/ZIF-67 nanocomposites were used as a modifier on a screen-printed electrode (GO/ZIF-67/SPE) for studying the electrochemical behavior of epinine in phosphate buffer saline (PBS) at pH 7.0 with voltammetry techniques. The GO/ZIF-67/SPE showed greater electrocatalytic activities than the bare SPE. As a result, the GO/ZIF-67/SPE was utilized for additional electrochemical examinations. The epinine concentration determination was in the range 9.0 × 10−8 M to 5.0 × 10−4 M, and the limit of detection (LOD) as well as the limit of quantification (LOQ) equaled 2.0 and 6.6 nM, respectively. From the scan rate study, the oxidation of epinine was found to be diffusion-controlled, and the simultaneous detection of epinine and dobutamine were well achieved with the differential pulse voltammetric (DPV) technique. Moreover, the stability and reproducibility of epinine at the GO/ZIF-67/SPE was studied, and the use of the GO/ZIF-67/SPE to detect epinine and dobutamine in real samples was furthermore successfully demonstrated.

DNA damage by oxidized fatty acids detected by DNA/SPE biosensor

Electrochemical DNA/screen-printed electrode biosensor (DNA/SPE biosensor) was tested for the detection of alterations in DNA formed as a consequence of the reaction between DNA and oxidative products of fatty acids. Interaction of DNA with a mixture of products generated during the oxidation of linoleic and oleic acids manifested DNA damage depending on a tested fatty acid and the presence of hydroperoxides and thiobarbituric acid reactive substances (TBARS) determined after the oxidation of fatty acids. A bigger extent of the DNA damage was registered in the case of the interaction with oxidized linoleic acid with the high content of TBARS. The results achieved suggest the possible application of DNA/SPE biosensor in the detection of an interaction between DNA and products of fatty acid oxidation.

Electrochemical determination of tramadol using modified screen printed electrode

The detection of tramadol using a screen printed electrode modified with La3+/ZnO nano-flowers and multi-walled carbon nanotubes (La3+/ZnO NFs-MWCNTs/SPE) is reported in this work. In order to examine tramadol electrochemical oxidation, the modified electrode was implemented with the utilization of differential pulse voltammetry, chronoamperometry and cyclic voltammetry as diagnostic techniques. The proposed electrode displays favorable electrocatalytic behavior concerning tramadol oxidation with an approximately 330 mV potential shift to a lesser positive potential. In the 0.5 to 800.0 μM range for tramadol, differential pulse voltammetry displays linear dynamic activity. Tramadol detection limit of 0.08 μM was derived within optimized testing conditions for this simple construction sensor. Lastly, this fabricated sensor was utilized with desirable results to determine tramadol in tramadol samples and urine samples.