scholarly journals A Spectral Data Compression (SDCOMP) Radiative Transfer Model for High-Spectral-Resolution Radiation Simulations

2020 ◽  
Vol 77 (6) ◽  
pp. 2055-2066 ◽  
Author(s):  
Chao Liu ◽  
Bin Yao ◽  
Vijay Natraj ◽  
Pushkar Kopparla ◽  
Fuzhong Weng ◽  
...  
Keyword(s):  
Optical Property ◽  
Radiative Transfer ◽  
Data Compression ◽  
Spectral Data ◽  
Spectral Resolution ◽  
General Circulation ◽  
General Circulation Models ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model

Abstract With the increasing use of satellite and ground-based high-spectral-resolution (HSR) measurements for weather and climate applications, accurate and efficient radiative transfer (RT) models have become essential for accurate atmospheric retrievals, for instrument calibration, and to provide benchmark RT solutions. This study develops a spectral data compression (SDCOMP) RT model to simulate HSR radiances in both solar and infrared spectral regions. The SDCOMP approach “compresses” the spectral data in the optical property and radiance domains, utilizing principal component analysis (PCA) twice to alleviate the computational burden. First, an optical-property-based PCA is performed for a given atmospheric scenario (atmospheric, trace gas, and aerosol profiles) to simulate relatively low-spectral-resolution radiances at a small number of representative wavelengths. Second, by using precalculated principal components from an accurate radiance dataset computed for a large number of atmospheric scenarios, a radiance-based PCA is carried out to extend the low-spectral-resolution results to desired HSR results at all wavelengths. This procedure ensures both that individual monochromatic RT calculations are efficiently performed and that the number of such computations is optimized. SDCOMP is approximately three orders of magnitude faster than numerically exact RT calculations. The resulting monochromatic radiance has relative errors less than 0.2% in the solar region and brightness temperature differences less than 0.1 K for over 95% of the cases in the infrared region. The efficiency and accuracy of SDCOMP not only make it useful for analysis of HSR measurements, but also hint at the potential for utilizing this model to perform RT simulations in mesoscale numerical weather and general circulation models.

scholarly journals Improvement of the Simulation of Cloud Longwave Scattering in Broadband Radiative Transfer Models

2018 ◽  
Vol 75 (7) ◽  
pp. 2217-2233 ◽  
Author(s):  
Guanglin Tang ◽  
Ping Yang ◽  
George W. Kattawar ◽  
Xianglei Huang ◽  
Eli J. Mlawer ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Multiple Scattering ◽  
General Circulation ◽  
General Circulation Models ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Discrete Ordinate ◽  
Wide Range ◽  
Scaling Methods ◽  
Computational Errors

Abstract Cloud longwave scattering is generally neglected in general circulation models (GCMs), but it plays a significant and highly uncertain role in the atmospheric energy budget as demonstrated in recent studies. To reduce the errors caused by neglecting cloud longwave scattering, two new radiance adjustment methods are developed that retain the computational efficiency of broadband radiative transfer simulations. In particular, two existing scaling methods and the two new adjustment methods are implemented in the Rapid Radiative Transfer Model (RRTM). The results are then compared with those based on the Discrete Ordinate Radiative Transfer model (DISORT) that explicitly accounts for multiple scattering by clouds. The two scaling methods are shown to improve the accuracy of radiative transfer simulations for optically thin clouds but not effectively for optically thick clouds. However, the adjustment methods reduce computational errors over a wide range, from optically thin to thick clouds. With the adjustment methods, the errors resulting from neglecting cloud longwave scattering are reduced to less than 2 W m−2 for the upward irradiance at the top of the atmosphere and less than 0.5 W m−2 for the surface downward irradiance. The adjustment schemes prove to be more accurate and efficient than a four-stream approximation that explicitly accounts for multiple scattering. The neglect of cloud longwave scattering results in an underestimate of the surface downward irradiance (cooling effect), but the errors are almost eliminated by the adjustment methods (warming effect).

scholarly journals Retrieval of Ice Cloud Properties from AIRS and MODIS Observations Based on a Fast High-Spectral-Resolution Radiative Transfer Model

2013 ◽  
Vol 52 (3) ◽  
pp. 710-726 ◽  
Author(s):  
Chenxi Wang ◽  
Ping Yang ◽  
Steven Platnick ◽  
Andrew K. Heidinger ◽  
Bryan A. Baum ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Spectral Resolution ◽  
Spectral Response ◽  
Thermal Infrared ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Retrieval Method ◽  
Ice Cloud ◽  
Cloud Properties

AbstractA computationally efficient high-spectral-resolution cloudy-sky radiative transfer model (HRTM) in the thermal infrared region (700–1300 cm−1, 0.1 cm−1 spectral resolution) is advanced for simulating the upwelling radiance at the top of atmosphere and for retrieving cloud properties. A precomputed transmittance database is generated for simulating the absorption contributed by up to seven major atmospheric absorptive gases (H2O, CO2, O3, O2, CH4, CO, and N2O) by using a rigorous line-by-line radiative transfer model (LBLRTM). Both the line absorption of individual gases and continuum absorption are included in the database. A high-spectral-resolution ice particle bulk scattering properties database is employed to simulate the radiation transfer within a vertically nonisothermal ice cloud layer. Inherent to HRTM are sensor spectral response functions that couple with high-spectral-resolution measurements in the thermal infrared regions from instruments such as the Atmospheric Infrared Sounder (AIRS) and Infrared Atmospheric Sounding Interferometer. When compared with the LBLRTM and the discrete ordinates radiative transfer model (DISORT), the root-mean-square error of HRTM-simulated single-layer cloud brightness temperatures in the thermal infrared window region is generally smaller than 0.2 K. An ice cloud optical property retrieval scheme is developed using collocated AIRS and Moderate Resolution Imaging Spectroradiometer (MODIS) data. A retrieval method is proposed to take advantage of the high-spectral-resolution instrument. On the basis of the forward model and retrieval method, a case study is presented for the simultaneous retrieval of ice cloud optical thickness τ and effective particle size Deff that includes a cloud-top-altitude self-adjustment approach to improve consistency with simulations.

scholarly journals A synthetic data set of high-spectral resolution infrared spectra for the Arctic atmosphere

2016 ◽  
Author(s):  
C. J. Cox ◽  
P. M. Rowe ◽  
S. P. Neshyba ◽  
V. P. Walden
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Infrared Spectra ◽  
Spectral Resolution ◽  
High Spectral Resolution ◽  
The Arctic ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Data Set ◽  
Atmospheric State

Abstract. Retrievals of cloud microphysical and macrophysical properties from ground-based and satellite-based infrared remote sensing instruments are critical for understanding clouds. However, retrieval uncertainties are difficult to quantify without a standard for comparison. This is particularly true over the polar regions where surface-based data for a cloud climatology are sparse, yet clouds represent a major source of uncertainty in weather and climate models. We describe a synthetic high-spectral resolution infrared data set that is designed to facilitate validation and development of cloud retrieval algorithms for surface- and satellite-based remote sensing instruments. Since the data set is calculated using pre-defined cloudy atmospheres, the properties of the cloud and atmospheric state are known a priori. The atmospheric state used for the simulations is drawn from radiosonde measurements made at the North Slope of Alaska (NSA) Atmospheric Radiation Measurement (ARM) site at Barrow, Alaska (71.325° N, 156.615° W), a location that is generally representative of the western Arctic. The cloud properties for each simulation are selected from statistical distributions derived from past field measurements. Upwelling (at 60 km) and downwelling (at the surface) infrared spectra are simulated for 222 cloudy cases from 50–3000 cm−1 (3.3 to 200 μm) at monochromatic (line-by-line) resolution at a spacing of ~ 0.01 cm−1 using the Line-by-line Radiative Transfer Model (LBLRTM) and the discrete-ordinate-method radiative transfer code (DISORT). These spectra are freely available for interested researchers from the ACADIS data repository (doi:10.5065/D61J97TT).

scholarly journals Measuring Stratospheric H2O with an Airborne Spectrometer

2014 ◽  
Vol 31 (7) ◽  
pp. 1502-1515 ◽  
Author(s):  
Maziar Bani Shahabadi ◽  
Yi Huang
Keyword(s):  
Water Vapor ◽  
Radiative Transfer ◽  
Spectral Resolution ◽  
High Sensitivity ◽  
Far Infrared ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Small Scale ◽  
Transfer Model ◽  
Infrared Spectral

Abstract This study examines the ability of an infrared spectral sensor flying at the tropopause level for retrieving stratospheric H2O. Synthetic downwelling radiance spectra simulated by the line-by-line radiative transfer model are used for this examination. The potential of high-sensitivity water vapor retrieval is demonstrated by an ideal sensor with low detector noise, high spectral resolution, and full infrared coverage. A suite of hypothetical sensors with varying specifications is then examined to determine the technological requirements for a satisfactory retrieval. This study finds that including far infrared in the sensor’s spectral coverage is essential for achieving accurate H2O retrieval with an accuracy of 0.4 ppmv (1-sigma). The uncertainties in other gas species such as CH4, N2O, O3, and CO2 do not significantly affect the H2O retrieval. Such a hyperspectral instrument may afford an advantageous tool, especially for detecting small-scale lower-stratospheric moistening events.

Model Calculations and Interferometer Measurements of Ice-Cloud Characteristics

2000 ◽  
Vol 39 (5) ◽  
pp. 634-644 ◽  
Author(s):  
Sunggi Chung ◽  
Steven Ackerman ◽  
Paul F. van Delst ◽  
W. Paul Menzel
Keyword(s):  
Radiative Transfer ◽  
Spectral Resolution ◽  
Gas Absorption ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Model Calculations ◽  
Ice Cloud ◽  
Macrophysical Properties ◽  
Ice Water

Abstract This paper investigates the relationship between high–spectral resolution infrared (IR) radiances and the microphysical and macrophysical properties of cirrus clouds. Through use of radiosonde measurements of the atmospheric state at the Department of Energy’s Atmospheric Radiation Measurement Program site, high–spectral resolution IR radiances are calculated by combining trace gas absorption optical depths from a line-by-line radiative transfer model with the discrete ordinate radiative transfer (DISORT) method. The sensitivity of the high–spectral resolution IR radiances to particle size, ice-water path, cloud-top location, cloud thickness, and multilayered cloud conditions is estimated in a multitude of calculations. DISORT calculations and interferometer measurements of cirrus ice cloud between 700 and 1300 cm−1 are compared for three different situations. The measurements were made with the High–Spectral Resolution Interferometer Sounder mounted on a National Aeronautics and Space Administration ER-2 aircraft flying at 20-km altitude during the Subsonic Aircraft Contrail and Cloud Effects Special Study (SUCCESS).

scholarly journals A synthetic data set of high-spectral-resolution infrared spectra for the Arctic atmosphere

2016 ◽  
Vol 8 (1) ◽  
pp. 199-211 ◽  
Author(s):  
Christopher J. Cox ◽  
Penny M. Rowe ◽  
Steven P. Neshyba ◽  
Von P. Walden
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Infrared Spectra ◽  
Spectral Resolution ◽  
High Spectral Resolution ◽  
The Arctic ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Data Set ◽  
Atmospheric State

Abstract. Cloud microphysical and macrophysical properties are critical for understanding the role of clouds in climate. These properties are commonly retrieved from ground-based and satellite-based infrared remote sensing instruments. However, retrieval uncertainties are difficult to quantify without a standard for comparison. This is particularly true over the polar regions, where surface-based data for a cloud climatology are sparse, yet clouds represent a major source of uncertainty in weather and climate models. We describe a synthetic high-spectral-resolution infrared data set that is designed to facilitate validation and development of cloud retrieval algorithms for surface- and satellite-based remote sensing instruments. Since the data set is calculated using pre-defined cloudy atmospheres, the properties of the cloud and atmospheric state are known a priori. The atmospheric state used for the simulations is drawn from radiosonde measurements made at the North Slope of Alaska (NSA) Atmospheric Radiation Measurement (ARM) site at Barrow, Alaska (71.325° N, 156.615° W), a location that is generally representative of the western Arctic. The cloud properties for each simulation are selected from statistical distributions derived from past field measurements. Upwelling (at 60 km) and downwelling (at the surface) infrared spectra are simulated for 260 cloudy cases from 50 to 3000 cm−1 (3.3 to 200 µm) at monochromatic (line-by-line) resolution at a spacing of  ∼  0.01 cm−1 using the Line-by-line Radiative Transfer Model (LBLRTM) and the discrete-ordinate-method radiative transfer code (DISORT). These spectra are freely available for interested researchers from the NSF Arctic Data Center data repository (doi:10.5065/D61J97TT).

scholarly journals A Novel GPU-Based Acceleration Algorithm for a Longwave Radiative Transfer Model

2020 ◽  
Vol 10 (2) ◽  
pp. 649 ◽  
Author(s):  
Yuzhu Wang ◽  
Yuan Zhao ◽  
Jinrong Jiang ◽  
He Zhang
Keyword(s):  
Radiative Transfer ◽  
General Circulation ◽  
Large Scale ◽  
General Circulation Models ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Processing Unit ◽  
Heating Rates ◽  
Area Of Interest ◽  
Intel Xeon

Graphics processing unit (GPU)-based computing for climate system models is a longstanding research area of interest. The rapid radiative transfer model for general circulation models (RRTMG), a popular atmospheric radiative transfer model, can calculate atmospheric radiative fluxes and heating rates. However, the RRTMG has a high calculation time, so it is urgent to study its GPU-based efficient acceleration algorithm to enable large-scale and long-term climatic simulations. To improve the calculative efficiency of radiation transfer, this paper proposes a GPU-based acceleration algorithm for the RRTMG longwave radiation scheme (RRTMG_LW). The algorithm concept is accelerating the RRTMG_LW in the g- p o i n t dimension. After implementing the algorithm in CUDA Fortran, the G-RRTMG_LW was developed. The experimental results indicated that the algorithm was effective. In the case without I/O transfer, the G-RRTMG_LW on one K40 GPU obtained a speedup of 30.98× over the baseline performance on one single Intel Xeon E5-2680 CPU core. When compared to its counterpart running on 10 CPU cores of an Intel Xeon E5-2680 v2, the G-RRTMG_LW on one K20 GPU in the case without I/O transfer achieved a speedup of 2.35×.

scholarly journals A High-Spectral-Resolution Radiative Transfer Model for Simulating Multilayered Clouds and Aerosols in the Infrared Spectral Region

2015 ◽  
Vol 72 (2) ◽  
pp. 926-942 ◽  
Author(s):  
Chenxi Wang ◽  
Ping Yang ◽  
Xu Liu
Keyword(s):  
Radiative Transfer ◽  
Spectral Resolution ◽  
Present Model ◽  
Reference Model ◽  
Mineral Dust ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Multiple User ◽  
Infrared Measurements

Abstract A fast and flexible model is developed to simulate the transfer of thermal infrared radiation at wavenumbers from 700 to 1300 cm−1 with a spectral resolution of 0.1 cm−1 for scattering–absorbing atmospheres. In a single run and at multiple user-defined levels, the present model simulates radiances at different viewing angles and fluxes. Furthermore, the model takes into account complicated and realistic scenes in which ice cloud, water cloud, and mineral dust layers may coexist within an atmospheric column. The present model is compared to a rigorous reference model, the 32-stream Discrete Ordinate Radiative Transfer model (DISORT) code. For an atmosphere with three scattering layers (water, ice, and mineral dust), the root-mean-square error of the simulated brightness temperatures at the top of the atmosphere is approximately 0.05 K, and the relative flux errors at the boundary and internal levels are much smaller than 1%. Within the same computing environment, the fast model runs more than 10 000, 6000, and 4000 times faster than DISORT under single-layer, two-layer, and three-layer cloud–aerosol conditions, respectively. With its computational efficiency and accuracy, the present model may optimally facilitate the forward radiative transfer simulations involved in remote sensing implementations based on high-spectral-resolution and narrowband infrared measurements and in the data assimilation applications of the weather forecasting system. The selected 0.1-cm−1 spectral resolution is an obstacle to extending the present model to strongly absorptive bands (e.g., 600–700 cm−1). However, the present clear-sky module can be substituted by a more accurate model for specific applications involving spectral bands with strong absorption.

Sign in / Sign up

Export Citation Format

Share Document