A Global Root-Zone Soil Moisture Analysis Using Simulated L-band Brightness Temperature in Preparation for the Hydros Satellite Mission

2006 ◽  
Vol 7 (5) ◽  
pp. 1126-1146 ◽  
Author(s):  
G. Balsamo ◽  
J-F. Mahfouf ◽  
S. Bélair ◽  
G. Deblonde
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Brightness Temperature ◽  
Land Surface ◽  
Root Zone ◽  
Satellite Observations ◽  
Reference State ◽  
Observation Error ◽  
Moisture Analysis ◽  
L Band

Abstract The aim of this study is to test a land data assimilation prototype for the production of a global daily root-zone soil moisture analysis. This system can assimilate microwave L-band satellite observations such as those from the future Hydros NASA mission. The experiments are considered in the framework of the Interaction Soil Biosphere Atmosphere (ISBA) land surface scheme used operationally at the Meteorological Service of Canada for regional and global weather forecasting. A land surface reference state is obtained after a 1-yr global land surface simulation, forced by near-surface atmospheric fields provided by the Global Soil Wetness Project, second initiative (GSWP-2). A radiative transfer model is applied to simulate the microwave L-band passive emission from the surface. The generated brightness temperature observations are distributed in space and time according to the satellite trajectory specified by the Hydros mission. The impact of uncertainties related to the satellite observations, the land surface, and microwave emission models is investigated. A global daily root-zone soil moisture analysis is produced with a simplified variational scheme. The applicability and performance of the system are evaluated in a data assimilation cycle in which the L-band simulated observations, generated from a land surface reference state, are assimilated to correct a prescribed initial root-zone soil moisture error. The analysis convergence is satisfactory in both summer and winter cases. In summer, when considering a 3-K observation error, 90% of land surface converges toward the reference state with a soil moisture accuracy better than 0.04 m3 m−3 after a 4-week assimilation cycle. A 5-K observation error introduces 1-week delay in the convergence. A study of the analysis error statistics is performed for understanding the properties of the system. Special features associated with the interactions between soil water and soil ice, and the presence of soil moisture vertical gradients, are examined.

The New Stand-Alone Surface Analysis at ECMWF: Implications for Land–Atmosphere DA Coupling

2019 ◽  
Vol 20 (10) ◽  
pp. 2023-2042 ◽  
Author(s):  
David Fairbairn ◽  
Patricia de Rosnay ◽  
Philip A. Browne
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Surface Analysis ◽  
Land Surface ◽  
Root Zone ◽  
Forecast Model ◽  
Near Surface ◽  
Weather Forecasts ◽  
Moisture Analysis ◽  
Screen Level

Abstract This article presents the “screen-level and surface analysis only” (SSA) system at the European Centre for Medium-Range Weather Forecasts (ECMWF). SSA is a simplification of the operational land–atmosphere weakly coupled data assimilation (WCDA). The goal of SSA is to provide 1) efficient research into land surface developments in NWP and 2) land reanalyses with land–atmosphere coupling. SSA maintains a coupled forecast model between assimilation cycles, but the atmospheric analysis is not performed; rather, it is forced from an archived analysis. Hence, SSA is much faster than WCDA, although it lacks feedback between the land and atmospheric analyses. A global sensitivity analysis was performed over one year to compare the WCDA and SSA systems. Prescribed proxy 2-m temperature/humidity screen-level observation errors were approximately doubled in the soil moisture data assimilation, thereby reducing the average size of the root-zone soil moisture analysis increments by about 60%. The systematic impact of these changes on the WCDA surface and near-surface atmospheric dynamics was effectively captured by SSA, although the short-term impact was underestimated. Importantly, the SSA forecast verification scores accurately reflected those of WCDA: atmospheric 1–10-day temperature/humidity forecasts were degraded in the tropics and lower midlatitudes up to about 700 hPa. The soil moisture analysis performance was not significantly impacted. These results endorse SSA as an NWP research tool and confirm the role of assimilating proxy screen-level observations in the soil moisture analysis to improve weather forecasts. Appropriate use and limitations of SSA are considered.

Cosmic Ray Neutron Sensing: Integration with land surface modelling using data assimilation for improved field-scale soil moisture estimates

2020 ◽  
Author(s):  
Amol Patil ◽  
Benjamin Fersch ◽  
Harrie-Jan Hendricks-Franssen ◽  
Harald Kunstmann
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Spatial Resolution ◽  
Land Surface ◽  
Root Zone ◽  
Cosmic Ray ◽  
Soil Parameters ◽  
Surface Model ◽  
Field Scale ◽  
Spatio Temporal

<p>Soil moisture is a key variable in atmospheric modelling to resolve the partitioning of net radiation into sensible and latent heat fluxes. Therefore, high resolution spatio-temporal soil moisture estimation is getting growing attention in this decade. The recent developments to observe soil moisture at field scale (170 to 250 m spatial resolution) using Cosmic Ray Neutron Sensing (CRNS) technique has created new opportunities to better resolve land surface atmospheric interactions; however, many challenges remain such as spatial resolution mismatch and estimation uncertainties. Our study couples the Noah-MP land surface model to the Data Assimilation Research Testbed (DART) for assimilating CRN intensities to update model soil moisture. For evaluation, the spatially distributed Noah-MP was set up to simulate the land surface variables at 1 km horizontal resolution for the Rott and Ammer catchments in southern Germany. The study site comprises the TERENO-preAlpine observatory with five CRNS stations and additional CRNS measurements for summer 2019 operated by our Cosmic Sense research group. We adjusted the soil parametrization in Noah-MP to allow the usage of EU soil data along with Mualem-van Genuchten soil hydraulic parameters. We use independent observations from extensive soil moisture sensor network (SoilNet) within the vicinity of CRNS sensors for validation. Our detailed synthetic and real data experiments are evaluated for the analysis of the spatio-temporal changes in updated root zone soil moisture and for implications on the energy balance component of Noah-MP. Furthermore, we present possibilities to estimate root zone soil parameters within the data assimilation framework to enhance standalone model performance.</p>

The Contributions of Gauge-Based Precipitation and SMAP Brightness Temperature Observations to the Skill of the SMAP Level-4 Soil Moisture Product

2020 ◽  
Author(s):  
Rolf H. Reichle ◽  
Qing Liu ◽  
Joseph V. Ardizzone ◽  
Wade T. Crow ◽  
Gabrielle J. M. De Lannoy ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Brightness Temperature ◽  
Land Surface ◽  
Root Zone ◽  
Land Surface Model ◽  
Surface Model ◽  
Meteorological Forcing ◽  
Earth Observing System ◽  
Error Surface

AbstractSoil Moisture Active Passive (SMAP) mission L-band brightness temperature (Tb) observations are routinely assimilated into the Catchment land surface model to generate Level-4 Soil Moisture (L4_SM) estimates of global surface and root-zone soil moisture at 9-km, 3-hourly resolution with ~2.5-day latency. The Catchment model in the L4_SM algorithm is driven with ¼-degree, hourly surface meteorological forcing data from the Goddard Earth Observing System (GEOS). Outside of Africa and the high latitudes, GEOS precipitation is corrected using Climate Prediction Center Unified (CPCU) gauge-based, ½-degree, daily precipitation. L4_SM soil moisture was previously shown to improve over land model-only estimates that use CPCU precipitation but no Tb assimilation (CPCU_SIM). Here, we additionally examine the skill of model-only (CTRL) and Tb assimilation-only (SMAP_DA) estimates derived without CPCU precipitation. Soil moisture is assessed versus in situ measurements in well-instrumented regions and globally through the Instrumental Variable (IV) method using independent soil moisture retrievals from the Advanced Scatterometer. At the in situ locations, SMAP_DA and CPCU_SIM have comparable soil moisture skill improvements relative to CTRL for the unbiased root-mean-square error (surface and root-zone) and correlation metrics (root-zone only). In the global average, SMAP Tb assimilation increases the surface soil moisture anomaly correlation by 0.10-0.11 compared to an increase of 0.02-0.03 from the CPCU-based precipitation corrections. The contrast is particularly strong in central Australia, where CPCU is known to have errors and observation-minus-forecast Tb residuals are larger when CPCU precipitation is used. Validation versus streamflow measurements in the contiguous U.S. reveals that CPCU precipitation provides most of the skill gained in L4_SM runoff estimates over CTRL.

scholarly journals From Near-Surface to Root-Zone Soil Moisture Using Different Assimilation Techniques

2007 ◽  
Vol 8 (2) ◽  
pp. 194-206 ◽  
Author(s):  
Joaquín Muñoz Sabater ◽  
Lionel Jarlan ◽  
Jean-Christophe Calvet ◽  
François Bouyssel ◽  
Patricia De Rosnay
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Surface Soil ◽  
Diffusion Processes ◽  
Root Zone ◽  
Computational Cost ◽  
Climatic Conditions ◽  
Surface Soil Moisture ◽  
Near Surface

Abstract Root-zone soil moisture constitutes an important variable for hydrological and weather forecast models. Microwave radiometers like the L-band instrument on board the European Space Agency’s (ESA) future Soil Moisture and Ocean Salinity (SMOS) mission are being designed to provide estimates of near-surface soil moisture (0–5 cm). This quantity is physically related to root-zone soil moisture through diffusion processes, and both surface and root-zone soil layers are commonly simulated by land surface models (LSMs). Observed time series of surface soil moisture may be used to analyze the root-zone soil moisture using data assimilation systems. In this paper, various assimilation techniques derived from Kalman filters (KFs) and variational methods (VAR) are implemented and tested. The objective is to correct the modeled root-zone soil moisture deficiencies of the newest version of the Interaction between Soil, Biosphere, and Atmosphere scheme (ISBA) LSM, using the observations of the surface soil moisture of the Surface Monitoring of the Soil Reservoir Experiment (SMOSREX) over a 4-yr period (2001–04). This time period includes contrasting climatic conditions. Among the different algorithms, the ensemble Kalman filter (EnKF) and a simplified one-dimensional variational data assimilation (1DVAR) show the best performances. The lower computational cost of the 1DVAR is an advantage for operational root-zone soil moisture analysis based on remotely sensed surface soil moisture observations at a global scale.

scholarly journals Improving Soil Moisture Estimates Over the Contiguous US Using Satellite Retrievals and Ensemble Based Data Assimilation Techniques

2019 ◽  
Author(s):  
Jostein Blyverket ◽  
Paul D. Hamer ◽  
Laurent Bertino ◽  
Clément Albergel ◽  
David Fairbairn ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Root Zone ◽  
Open Loop ◽  
Optimal Interpolation ◽  
Surface Zone ◽  
Significance Level ◽  
In Situ Observations

A number of studies have shown that assimilation of satellite derived soil moisture using the ensemble Kalman Filter (EnKF) can improve soil moisture estimates, particularly for the surface zone. However, the EnKF is computationally expensive since an ensemble of model integrations have to be propagated forward in time. Here, assimilating satellite soil moisture data from the Soil Moisture Active Passive (SMAP) mission, we compare the EnKF with the computationally cheaper ensemble Optimal Interpolation (EnOI) method over the contiguous United States (CONUS). The background error-covariance in the EnOI is sampled in two ways: i) by using the stochastic spread from an ensemble open-loop run, and ii) sampling from the model spinup climatology. Our results indicate that the EnKF is only marginally superior to one version of the EnOI. Furthermore the assimilation of SMAP data using the EnKF and EnOI is found to improve the surface zone correlation with in-situ observations at a 95% significance level. The EnKF assimilation of SMAP data is also found to improve root-zone correlation with independent in-situ data at the same significance level; however this improvement is dependent on which in-situ network we are validating against. We evaluate how the quality of the atmospheric forcing affects the analysis results by prescribing the land surface data assimilation system with either observation corrected or model derived precipitation. Surface zone correlation skill increases for the analysis using both the corrected and model derived precipitation, but only the latter shows an improvement at the 95% significance level. The study also suggest that the EnOI can be used for bias-correction of the atmospheric fields where post-processed data are not available. Finally, we assimilate three different Level-2 satellite derived soil moisture products from ESA Climate Change Initiative (CCI), SMAP and SMOS (Soil Moisture and Ocean Salinity) using the EnOI, and then compare the relative performance of the three resulting analyses against in-situ soil moisture observations. In this comparison, we find that all three analyses offer improvements over an open-loop run when comparing to in-situ observations. The assimilation of SMAP data is found to perform marginally better than the assimilation of SMOS data, while assimilation of the ESA CCI data shows the smallest improvement of the three analysis products.

scholarly journals Streamflow data assimilation for soil moisture analysis

2010 ◽  
Vol 3 (1) ◽  
pp. 1-12 ◽  
Author(s):  
K. Warrach-Sagi ◽  
V. Wulfmeyer
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Climate Models ◽  
Root Zone ◽  
Weather Forecast ◽  
Surface Model ◽  
River Catchment ◽  
Streamflow Data ◽  
The Impact

Abstract. Streamflow depends on the soil moisture of a river catchment and can be measured with relatively high accuracy. The soil moisture in the root zone influences the latent heat flux and, hence, the quantity and spatial distribution of atmospheric water vapour and precipitation. As numerical weather forecast and climate models require a proper soil moisture initialization for their land surface models, we enhanced an Ensemble Kalman Filter to assimilate streamflow time series into the multi-layer land surface model TERRA-ML of the regional weather forecast model COSMO. The impact of streamflow assimilation was studied by an observing system simulation experiment in the Enz River catchment (located at the downwind side of the northern Black Forest in Germany). The results demonstrate a clear improvement of the soil moisture field in the catchment. We illustrate the potential of streamflow data assimilation for weather forecasting and discuss its spatial and temporal requirements for a corresponding, automated river gauging network.

The implementation of Community Microwave Emission Model (CMEM) as the observation operator in TerrsysMP-PDAF

2020 ◽  
Author(s):  
Shaoning Lv ◽  
Stefan Poll ◽  
Bernd Schalge ◽  
Pablo Garfias ◽  
Clemens Simmer
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Passive Microwave ◽  
Microwave Emission ◽  
Emission Model ◽  
Ideal Case ◽  
Observation Operator ◽  
Community Land Model ◽  
L Band

<p>Studies with satellite-based passive microwave L-band observations have been fostered strongly by the launch of NASA's Soil Moisture Active Passive (SMAP) satellite on January 31, 2015 (Entekhabi et al. 2010), which complements and extends the observations at L-band by the ESA's Soil Moisture Ocean Salinity (SMOS) mission in orbit since 2009 (Kerr et al. 2001, Mecklenburg et al. 2012, Lievens et al. 2014). SMOS and SMAP data assimilation studies started during their pre- and post-launch period. Flores et al. (2012) used an Ensemble Kalman Filter to constrain the uncertainties of the simulated soil moisture fields from physical-based hydrological models. Our work intends to explore the use and value of passive L-band satellite observations for ensemble-based data assimilation with fully-coupled terrestrial system models for mesoscale catchments. An observation operator for satellite-based passive microwave (PMW) observations based on the community microwave emission model (CMEM) (de Rosnay et al. 2009, Drusch et al. 2009) has been modified, applied and tested in an ideal case developed within the FOR2131 (Schalge et al. 2016) with the coupled subsurface-land surface-atmosphere simulation platform TerrSysMP (Shrestha et al. 2014), which couples ParFlow (subsurface), Community Land Model (CLM, surface), and COSMO (atmosphere). We achieve the development of a satellite simulator for passive L-band observations of the satellite missions SMAP and SMOS and its adaptation to the ideal case, and the lower-resolution TerrSysMP model applied for data assimilation (TerrSysMP-PDAF).</p>

scholarly journals Ensemble-based data assimilation of atmospheric boundary layer observations improves the soil moisture analysis

2021 ◽  
Author(s):  
Tobias Sebastian Finn ◽  
Gernot Geppert ◽  
Felix Ament
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Kalman Filter ◽  
Data Assimilation ◽  
Atmospheric Boundary Layer ◽  
Ensemble Kalman Filter ◽  
Land Surface ◽  
Model Systems ◽  
Surface Component ◽  
Moisture Analysis

Abstract. We revise the potential of assimilating atmospheric boundary layer observations into the soil moisture. Previous studies often stated a negative assimilation impact of boundary layer observations on the soil moisture analysis, but recent developments in physically-consistent hydrological model systems and ensemble-based data assimilation lead to an emerging potential of boundary layer observations for land surface data assimilation. To explore this potential, we perform idealized twin experiments for a seven-day period in Summer 2015 with a coupled atmosphere-land modelling platform. We use TerrSysMP for these limited-area simulations with a horizontal resolution 1.0 km in the land surface component. We assimilate sparse synthetic 2-metre-temperature observations into the land surface component and update the soil moisture with a localized Ensemble Kalman filter. We show a positive assimilation impact of these observations on the soil moisture analysis during day-time and a neutral impact during night. Furthermore, we find that hourly-filtering with a three-dimensional Ensemble Kalman filter results in smaller errors than daily-smoothing with a one-dimensional Simplified Extended Kalman filter, whereas the Ensemble Kalman filter additionally allows us to directly assimilate boundary layer observations without an intermediate optimal interpolation step. We increase the physical consistency in the analysis for the land surface and boundary by updating the atmospheric temperature together with the soil moisture, which as a consequence further reduces errors in the soil moisture analysis. Based on these results, we conclude that we can merge the decoupled data assimilation cycles for the land surface and the atmosphere into one single cycle with hourly-like update steps.

scholarly journals Monitoring Soil Moisture Drought over Northern High Latitudes from Space

2019 ◽  
Author(s):  
Jostein Blyverket ◽  
Paul D. Hamer ◽  
Philipp Schneider ◽  
Clément Albergel ◽  
William A. Lahoz
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Brightness Temperature ◽  
Land Surface ◽  
Standardized Precipitation Index ◽  
Drought Indices ◽  
Additional Information ◽  
Data Assimilation System ◽  
Temporal Coverage ◽  
Assimilation System

Mapping drought from space using, e.g., surface soil moisture (SSM), has become viable in the last decade. However, state of the art SSM retrieval products suffer from very poor coverage over northern latitudes. In this study, we propose an innovative drought indicator with a wider spatial and temporal coverage than that obtained from satellite SSM retrievals. We evaluate passive microwave brightness temperature observations from the Soil Moisture and Ocean Salinity (SMOS) satellite as a surrogate drought metric, and introduce a Standardized Brightness Temperature Index (STBI). The STBI is validated against drought indices from a land surface data assimilation system (LDAS-Monde), two satellite dervied SSM indices and a standardized precipitation index. Finally, we evaluate the STBI against the before mentioned drought indices in a case study of the 2018 Nordic drought. The STBI is found to be superior to the drought index created from satellite derived SSM in both spatial and temporal coverage over the Nordic region. Our results indicate that when compared to drought indices from precipitation data and a land data assimilation system, the STBI is able to capture the 2018 drought onset, severity and extent. Thus, the STBI index could provide additional information for drought monitoring in regions where the SSM retrieval problem is difficult.

Sign in / Sign up

Export Citation Format

Share Document