scholarly journals Demonstration of the Use of Remote Temperature Monitoring Devices in Vaccine Refrigerators in Haiti

2017 ◽  
Vol 133 (1) ◽  
pp. 39-44 ◽  
Author(s):  
Kathleen F. Cavallaro ◽  
Jeannot Francois ◽  
Roody Jacques ◽  
Derline Mentor ◽  
Idrissa Yalcouye ◽  
...  

After the 2010 earthquake, Haiti committed to introducing 4 new antigens into its routine immunization schedule, which required improving its cold chain (ie, temperature-controlled supply chain) and increasing vaccine storage capacity by installing new refrigerators. We tested the feasibility of using remote temperature monitoring devices (RTMDs) in Haiti in a sample of vaccine refrigerators fueled by solar panels, propane gas, or electricity. We analyzed data from 16 RTMDs monitoring 24 refrigerators in 15 sites from March through August 2014. Although 5 of the 16 RTMDs exhibited intermittent data gaps, we identified typical temperature patterns consistent with refrigerator door opening and closing, propane depletion, thermostat insufficiency, and overstocking. Actual start-up, annual maintenance, and annual electricity costs for using RTMDs were $686, $179, and $9 per refrigerator, respectively. In Haiti, RTMD use was feasible. RTMDs could be prioritized for use with existing refrigerators with high volumes of vaccines and new refrigerators to certify their functionality before use. Vaccine vial monitors could provide additional useful information about cumulative heat exposure and possible vaccine denaturation.

2017 ◽  
Vol 09 (01) ◽  
Author(s):  
Saidu Yauba ◽  
Sobngwi Joelle ◽  
Nkwain Jude ◽  
Biloa O Tracy ◽  
Kobela Marie ◽  
...  

2021 ◽  
Vol 1 (2) ◽  
pp. 85-91
Author(s):  
Yulisman ◽  
Naziful Iman ◽  
Eka Sabna ◽  
Hendry Fonda

The system of opening and closing the hotel room doors is already using RFID but its use is still not optimal because the card used is very expensive and the card used can only be one card for each room, so if the card is lost, you have to re-enter the card id. Therefore, digital electronic technology systems and devices are needed to make it easier to open the door and close the hotel room so that it can facilitate the hotel security system with automatic locks. This system and device uses an E-KTP and an Internet of Thing (IoT)-based Keypad and which functions to control the device using a NodeMCU while for a card reader with an RFID engine. The research method uses a model, namely with a prototype model for making systems and automatic room door locking system tools. The results and conclusions of the manufacture of hotel room automatic door locking systems and devices using an Internet of Thing (IoT)-based E-KTP equipped with a message LCD and keypad as a door opening solution if the RFID machine does not work. The security of hotel guests who stay is more guaranteed and can also make it easier for guests and hotel staff with an automatic hotel room door lock system. The results of the user's assessment of the work of a series of systems and tools to open and lock this automatic hotel room door are very good with a value of 88.7%.


Vaccine ◽  
2020 ◽  
Vol 38 (14) ◽  
pp. 3008-3014 ◽  
Author(s):  
Andrew J. Leidner ◽  
Helen Fisun ◽  
Sean Trimble ◽  
Paul Lucas ◽  
Cameron Noblit ◽  
...  

2017 ◽  
Vol 867 ◽  
pp. 272-279
Author(s):  
N. Gayathri ◽  
V.K. Shanmuganathan ◽  
K.G. Karthigayan ◽  
S. Manesh Kumar

Energy is an important aspect in our day to day life. It is important to save energy wherever possible that to electric energy. We are suffering from electric energy crisis now-a-days. In order to save electric energy alternate system is chosen and it is implemented which would save electric energy. Wasting energy for supplementary or supporting works like machine door opening and closing considered as uneconomical. Energy consuming system consumes lot of energy for supporting works. In this energy saving concept two different types of system can be coupled to work as a single system which would save much energy than before. Our concept discusses about the same. Energy wastage for operating CNC machine door is taken for consideration in our work and analysis has been done on it. A new hydraulic operating system is proposed to overcome the difficulties.


Author(s):  
Karel Sima ◽  
Tomas Syrovy ◽  
Silvan Pretl ◽  
Jaroslav Freisleben ◽  
David Cesek ◽  
...  

2013 ◽  
Vol 91 (12) ◽  
pp. 906-913 ◽  
Author(s):  
Manoj V Murhekar ◽  
Srihari Dutta ◽  
Ambujam Nair Kapoor ◽  
Sailaja Bitragunta ◽  
Raja Dodum ◽  
...  

2013 ◽  
Vol 416-417 ◽  
pp. 1969-1973 ◽  
Author(s):  
Li Zhu Wu ◽  
Yu Zhao

This thesis is based on Internet of Things technology to study the internal temperature of the refrigerated transport vehicles, combined with the knowledge of RFID, temperature measurement, GPRS, and the formation of a real-time temperature monitoring the whole process of the cold chain logistics for food safety monitoring and accountability to provide a reliable technical support.


Sign in / Sign up

Export Citation Format

Share Document