Potential for the valorisation of brewer’s spent grains: A case study for the sequential extraction of saccharides and lignin

2021 ◽  
pp. 0734242X2110555
Author(s):  
Simon de Crane d’Heysselaer ◽  
Lauris Bockstal ◽  
Nicolas Jacquet ◽  
Quentin Schmetz ◽  
Aurore Richel
Keyword(s):  
Reaction Time ◽  
Chemical Composition ◽  
Large Scale ◽  
Extraction Process ◽  
Spent Grains ◽  
Successive Extraction ◽  
Brewing Process ◽  
Efficient Extraction ◽  
Aqueous Treatment

This study highlights the possibility of using brewers’ grains (BSGs) for the successive extraction of the main lignocellulosic biopolymers, namely, cellulose, hemicelluloses and lignin. An exhaustive chemical characterisation revealed a variability of composition in distinct batches of BSGs, depending on their origin and the brewing process used. In particular, the protein content can vary from 13wt% to 23wt%, which is accompanied by a change in the hemicelluloses content from 9% to 23% (in the samples of our study). By applying a two-step aqueous treatment, involving an acid (1.25% v/v aq. H2SO4) and a base (3% w/v aq. NaOH) at a temperature of 120°C and fixed reaction time of a few tens of minutes (15–90 minutes), more than 80% of hemicelluloses could be recovered. Cellulose could be isolated at more than 68%, while a high purity lignin could be recovered from a lignin-rich fraction (70wt%). Our work also suggests that the variability of the chemical composition of these BSGs is a hindrance to achieving process standardisation and large-scale exploitation. The pooling of various materials is therefore not a recommended option, and the preliminary chemical analysis of the composition is therefore a prerequisite for an efficient extraction process.

scholarly journals Hydrothermal Carbonization of Brewery’s Spent Grains for the Production of Solid Biofuels

Beverages ◽  
2019 ◽  
Vol 5 (1) ◽  
pp. 12 ◽  
Author(s):  
Mateusz Jackowski ◽  
Damian Semba ◽  
Anna Trusek ◽  
Mateusz Wnukowski ◽  
Lukasz Niedzwiecki ◽  
...  
Keyword(s):  
Large Scale ◽  
Biogas Production ◽  
Animal Husbandry ◽  
Hydrothermal Carbonization ◽  
Fuel Properties ◽  
Solid Biofuels ◽  
Spent Grains ◽  
Brewing Process ◽  
Spent Grain ◽  
Preliminary Study

To make a beer there are four essential ingredients needed: water, malt, hops, and yeast. After brewing process, the main wastes are spent grains. These are often used as additions to fodders in animal husbandry. This study presents preliminary results of an investigation aiming to determine the feasibility of an alternative use of spent grains as a potential source of solid fuel. This source of energy could make breweries partly sustainable in terms of their energy supply. Such an approach may be feasible especially in large scale industrial breweries. This preliminary study presents encouraging results, showing improvements in terms of the fuel properties of the spent grain after its valorization through hydrothermal carbonization. Moreover, qualitative GC-MS analysis also indicates potential feasibility of the liquid byproduct of the hydrothermal carbonization of spent grain for biogas production. Results of proximate, ultimate, and DTG analyses show that hydrothermal carbonization of spent grain could improve its fuel properties and make it an especially suitable feedstock for fast pyrolysis and gasification. Improvement of HHV is also an improvement in terms of combustion.

A Family With Autosomal-Dominant Progressive Sensorineural Hearing Loss

1996 ◽  
Vol 5 (1) ◽  
pp. 23-32 ◽  
Author(s):  
Chris Halpin ◽  
Barbara Herrmann ◽  
Margaret Whearty
Keyword(s):  
Speech Production ◽  
Hearing Aids ◽  
Role Models ◽  
Speech Intelligibility ◽  
Large Scale ◽  
Speech Language Pathology ◽  
The Family ◽  
Patient Will ◽  
Language Pathology

The family described in this article provides an unusual opportunity to relate findings from genetic, histological, electrophysiological, psychophysical, and rehabilitative investigation. Although the total number evaluated is large (49), the known, living affected population is smaller (14), and these are spread from age 20 to age 59. As a result, the findings described above are those of a large-scale case study. Clearly, more data will be available through longitudinal study of the individuals documented in the course of this investigation but, given the slow nature of the progression in this disease, such studies will be undertaken after an interval of several years. The general picture presented to the audiologist who must rehabilitate these cases is that of a progressive cochlear degeneration that affects only thresholds at first, and then rapidly diminishes speech intelligibility. The expected result is that, after normal language development, the patient may accept hearing aids well, encouraged by the support of the family. Performance and satisfaction with the hearing aids is good, until the onset of the speech intelligibility loss, at which time the patient will encounter serious difficulties and may reject hearing aids as unhelpful. As the histological and electrophysiological results indicate, however, the eighth nerve remains viable, especially in the younger affected members, and success with cochlear implantation may be expected. Audiologic counseling efforts are aided by the presence of role models and support from the other affected members of the family. Speech-language pathology services were not considered important by the members of this family since their speech production developed normally and has remained very good. Self-correction of speech was supported by hearing aids and cochlear implants (Case 5’s speech production was documented in Perkell, Lane, Svirsky, & Webster, 1992). These patients received genetic counseling and, due to the high penetrance of the disease, exhibited serious concerns regarding future generations and the hope of a cure.

The Boeing 787 Dreamliner--A case study in large-scale design integration

2008 ◽  
Author(s):  
D. L. McMullin ◽  
A. R. Jacobsen ◽  
D. C. Carvan ◽  
R. J. Gardner ◽  
J. A. Goegan ◽  
...  
Keyword(s):  
Large Scale ◽  
Design Integration ◽  
Scale Design

Biorefinery implementation for recovery debottlenecking at existing pulp mills- Part II: Techno-economic evaluation

TAPPI Journal ◽  
2012 ◽  
Vol 11 (8) ◽  
pp. 17-24 ◽  
Author(s):  
HAKIM GHEZZAZ ◽  
LUC PELLETIER ◽  
PAUL R. STUART
Keyword(s):  
Cost Estimation ◽  
Process Model ◽  
Black Liquor ◽  
Pulp Mill ◽  
Value Added ◽  
Economic Assessment ◽  
Extraction Process ◽  
Estimation Methods ◽  
Precipitation Process

The evaluation and process risk assessment of (a) lignin precipitation from black liquor, and (b) the near-neutral hemicellulose pre-extraction for recovery boiler debottlenecking in an existing pulp mill is presented in Part I of this paper, which was published in the July 2012 issue of TAPPI Journal. In Part II, the economic assessment of the two biorefinery process options is presented and interpreted. A mill process model was developed using WinGEMS software and used for calculating the mass and energy balances. Investment costs, operating costs, and profitability of the two biorefinery options have been calculated using standard cost estimation methods. The results show that the two biorefinery options are profitable for the case study mill and effective at process debottlenecking. The after-tax internal rate of return (IRR) of the lignin precipitation process option was estimated to be 95%, while that of the hemicellulose pre-extraction process option was 28%. Sensitivity analysis showed that the after tax-IRR of the lignin precipitation process remains higher than that of the hemicellulose pre-extraction process option, for all changes in the selected sensitivity parameters. If we consider the after-tax IRR, as well as capital cost, as selection criteria, the results show that for the case study mill, the lignin precipitation process is more promising than the near-neutral hemicellulose pre-extraction process. However, the comparison between the two biorefinery options should include long-term evaluation criteria. The potential of high value-added products that could be produced from lignin in the case of the lignin precipitation process, or from ethanol and acetic acid in the case of the hemicellulose pre-extraction process, should also be considered in the selection of the most promising process option.

Disruptive innovation and operationalization in local and sustainable food systems: Examining the University of Toronto-Local Food Plus partnership

2019 ◽  
Vol 6 (1) ◽  
pp. 120-139
Author(s):  
Lori Stahlbrand
Keyword(s):  
Food Systems ◽  
Large Scale ◽  
Food System ◽  
Local Food ◽  
Disruptive Innovation ◽  
Government Support ◽  
Sustainable Food ◽  
University Of Toronto ◽  
The University

This paper traces the partnership between the University of Toronto and the non-profit Local Food Plus (LFP) to bring local sustainable food to its St. George campus. At its launch, the partnership represented the largest purchase of local sustainable food at a Canadian university, as well as LFP’s first foray into supporting institutional procurement of local sustainable food. LFP was founded in 2005 with a vision to foster sustainable local food economies. To this end, LFP developed a certification system and a marketing program that matched certified farmers and processors to buyers. LFP emphasized large-scale purchases by public institutions. Using information from in-depth semi-structured key informant interviews, this paper argues that the LFP project was a disruptive innovation that posed a challenge to many dimensions of the established food system. The LFP case study reveals structural obstacles to operationalizing a local and sustainable food system. These include a lack of mid-sized infrastructure serving local farmers, the domination of a rebate system of purchasing controlled by an oligopolistic foodservice sector, and embedded government support of export agriculture. This case study is an example of praxis, as the author was the founder of LFP, as well as an academic researcher and analyst.

Algorithm of combining chromatography mass spectrometry-untargeted profiling and multivariate analysis for identification of marker-substances in samples of complex composition

2020 ◽  
Vol 86 (7) ◽  
pp. 12-19
Author(s):  
I. V. Plyushchenko ◽  
D. G. Shakhmatov ◽  
I. A. Rodin
Keyword(s):  
Mass Spectrometry ◽  
Multivariate Analysis ◽  
Large Scale ◽  
Complex Composition ◽  
Unified Protocol ◽  
Chromatography Mass Spectrometry ◽  
Marker Substances ◽  
Selection Testing ◽  
Untargeted Profiling

A viral development of statistical data processing, computing capabilities, chromatography-mass spectrometry, and omics technologies (technologies based on the achievements of genomics, transcriptomics, proteomics, metabolomics) in recent decades has not led to formation of a unified protocol for untargeted profiling. Systematic errors reduce the reproducibility and reliability of the obtained results, and at the same time hinder consolidation and analysis of data gained in large-scale multi-day experiments. We propose an algorithm for conducting omics profiling to identify potential markers in the samples of complex composition and present the case study of urine samples obtained from different clinical groups of patients. Profiling was carried out by the method of liquid chromatography mass spectrometry. The markers were selected using methods of multivariate analysis including machine learning and feature selection. Testing of the approach was performed using an independent dataset by clustering and projection on principal components.

Sign in / Sign up

Export Citation Format

Share Document