Vibration analysis of supported thick-walled cylindrical shell made of functionally graded material under pressure loading

2014 ◽  
Vol 22 (4) ◽  
pp. 1023-1036 ◽  
Author(s):  
Mohammad Reza Isvandzibaei ◽  
Hishamuddin Jamaluddin ◽  
Raja Ishak Raja Hamzah
Keyword(s):  
Cylindrical Shell ◽  
Functionally Graded Material ◽  
Vibration Analysis ◽  
Functionally Graded ◽  
Pressure Loading ◽  
Graded Material

Free Vibration and Elastic Critical Load of Functionally Graded Material Thin Cylindrical Shells Under Internal Pressure

2018 ◽  
Vol 18 (11) ◽  
pp. 1850138 ◽  
Author(s):  
Yueyang Han ◽  
Xiang Zhu ◽  
Tianyun Li ◽  
Yunyan Yu ◽  
Xiaofang Hu
Keyword(s):  
Cylindrical Shell ◽  
Free Vibration ◽  
Internal Pressure ◽  
Critical Load ◽  
Natural Frequency ◽  
Functionally Graded Material ◽  
Present Method ◽  
Cylindrical Shells ◽  
Functionally Graded ◽  
Graded Material

An analytical approach for predicting the free vibration and elastic critical load of functionally graded material (FGM) thin cylindrical shells filled with internal pressured fluid is presented in this study. The vibration of the FGM cylindrical shell is described by the Flügge shell theory, where the internal static pressure is considered as the prestress term in the shell equations. The motion of the internal fluid is described by the acoustic wave equation. The natural frequencies of the FGM cylindrical shell under different internal pressures are obtained with the wave propagation method. The relationship between the internal pressure and the natural frequency of the cylindrical shell is analyzed. Then the linear extrapolation method is employed to obtain the elastic critical load of the FGM cylindrical shell from the condition that the increasing pressure has resulted in zero natural frequency. The accuracy of the present method is verified by comparison with the published results. The effects of gradient index, boundary conditions and structural parameters on the elastic critical load of the FGM cylindrical shell are discussed. Compared with the experimental and numerical analyses based on the external pressure, the present method is simple and easy to carry out.

A third-order shear deformation theory for nonlinear vibration analysis of stiffened functionally graded material sandwich doubly curved shallow shells with four material models

2017 ◽  
Vol 21 (4) ◽  
pp. 1316-1356 ◽  
Author(s):  
Dang T Dong ◽  
Dao Van Dung
Keyword(s):  
Functionally Graded Material ◽  
Vibration Analysis ◽  
Deformation Theory ◽  
Natural Frequencies ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Third Order ◽  
Shallow Shells ◽  
Graded Material ◽  
Doubly Curved

This study presents a nonlinear vibration analysis of function graded sandwich doubly curved shallow shells, which reinforced by functionally graded material stiffeners and rested on the Pasternak foundation. The shells are subjected to the combination of mechanical, thermal, and damping loading. Four models of the sandwich shells with general sigmoid and power laws distribution are considered. The governing equations are established based on the third-order shear deformation theory. Von Kármán-type nonlinearity and smeared stiffener technique are taken into account. The explicit expressions for determining natural frequencies, nonlinear frequency–amplitude relation, and time–deflection curves are obtained by employing the Galerkin method. Finally, the fourth-order Runge–Kutta method is applied to investigate the influences of functionally graded material stiffeners, the boundary conditions, the models of the shells, thermal environment, foundation and geometrical parameters on the natural frequencies and dynamic nonlinear responses of the sandwich shells.

Effects of piezoelectric rings on electro-elasto-dynamic behaviour of functionally graded cylindrical shell

2016 ◽  
Vol 28 (2) ◽  
pp. 272-289 ◽  
Author(s):  
Mohammadreza Saviz
Keyword(s):  
Finite Element ◽  
Cylindrical Shell ◽  
Functionally Graded Material ◽  
Volume Fraction ◽  
Virtual Work ◽  
Electrical Potential ◽  
Axial Direction ◽  
Functionally Graded ◽  
Radial Coordinate ◽  
Graded Material

A layer-wise finite element approach is adopted to analyse the hollow cylindrical shell made of functionally graded material with piezoelectric rings as sensor/actuator, under dynamic load. The mechanical properties of the substrate are regulated by volume fraction as a function of radial coordinate. The thickness of functionally graded material shell and piezo-rings is divided into mathematical sub-layers and then the general layer-wise laminate theory is formulated through introducing piecewise continuous approximations across the thickness, accounting for any discontinuity in derivatives of the displacement at the interface between the ring and cylinder. The virtual work statement including structural and electrical potential energies yields the three-dimensional governing equations which are reduced to two-dimensional differential equations, using layer-wise method. For axisymmetric case, the resulted equations are solved with one-dimensional finite element method in the axial direction. By assembling stiffness and mass matrices, the required stress and displacement continuities at each interface and between the two adjacent elements are forced. The results for free vibration and static loading are applied to study the convergence and verified by comparing them to solutions of similar existing problems. The induced deformation by piezoelectric actuators as well as the effect of rings on functionally graded material shell is investigated.

Sign in / Sign up

Export Citation Format

Share Document