Structural behavior of FRP-strengthened reinforced concrete shear walls with openings using finite element method

2017 ◽  
Vol 21 (7) ◽  
pp. 1072-1087 ◽  
Author(s):  
Khaled Aslani ◽  
Omid Kohnehpooshi
2021 ◽  
Vol 3 (1) ◽  
pp. 95-105
Author(s):  
T. Makovkina ◽  
◽  
M. Surianinov ◽  
O. Chuchmai ◽  
◽  
...  

Analytical, experimental and numerical results of determination of natural frequencies and forms of oscillations of reinforced concrete and fiber concrete beams are given. Modern analytical, numerical and experimental methods of studying the dynamics of reinforced concrete and fiber concrete beams are analyzed. The problem of determining the natural frequencies and forms of oscillations of reinforced concrete and fiber concrete beams at the initial modulus of elasticity and taking into account the nonlinear diagram of deformation of materials is solved analytically. Computer modeling of the considered constructions in four software complexes is done and the technique of their modal analysis on the basis of the finite element method is developed. Experimental researches of free oscillations of the considered designs and the comparative analysis of all received results are carried out. It is established that all involved complexes determine the imaginary frequency and imaginary form of oscillations. The frequency spectrum calculated by the finite element method is approximately 4% lower than that calculated analytically; the results of the calculation in SOFiSTiK differ by 2% from the results obtained in the PC LIRA; the discrepancy with the experimental data reaches 20%, and all frequencies calculated experimentally, greater than the frequencies calculated analytically or by the finite element method. This rather significant discrepancy is explained, according to the authors, by the incorrectness of the used dynamic model of the reinforced beam. The classical dynamics of structures is known to be based on the theory of linear differential equations, and the oscillations of structures are considered in relation to the unstressed initial state. It is obvious that in the study of free and forced oscillations of reinforced concrete building structures such an approach is unsuitable because they are physically nonlinear systems. The concept of determining the nonlinear terms of these equations is practically not studied. Numerous experimental researches and computer modeling for the purpose of qualitative and quantitative detection of all factors influencing a spectrum of natural frequencies of fluctuations are necessary here.


2021 ◽  
Vol 1 (2) ◽  
pp. 10-15
Author(s):  
Hovhannes Armen Avagyan ◽  
Arman Sevak Margaryan

The study of a building with a complex planning solution, rubber-metal laminated seismic isolation supports (hereinafter referred to a RMLSIS) placed at the foundation level and with a reinforced concrete frame-braced system is presented, taking into account the displacement of the structure formed as a result of torsion. The analyses were conducted with the finite element method. The calculation schemes were modeled using the "Lira-SAPR" software. The displacement of the structure formed as a result of torsion of buildings having the same planning solution, different number of floors as well as with and without RMLSIS is estimated. The results obtained show that the displacement values of the structure formed as a result of torsion increased about 40% in buildings without RMLSIS and 25% in buildings with RMLSIS.


Sign in / Sign up

Export Citation Format

Share Document