A viewpoint on material and design considerations for oesophageal stents with extended lifetime

Oesophageal stents are meshed tubular implants designed to maintain patency of the oesophageal lumen and attenuate the symptoms of oesophageal cancer. Oesophageal cancers account for one in twenty cancer diagnoses and can lead to dysphasia, malnutrition and the diminishment of patient quality of life (QOL). Self-expanding oesophageal stents are the most common approach to attenuate these symptoms. Recent advances in oncological therapy have enabled patient survival beyond the lifetime of current devices. This introduces new complications for palliation, driving the need for innovation in stent design. This review identifies the factors responsible for stent failure. It explores the challenges of enhancing the longevity of stent therapies and outlines solutions to improving clinical outcomes. Discussions focus on the role of stent materials, construction methods, and coatings upon device performance. We found three key stent enhancement strategies currently used; material surface treatments, anti-migratory modifications, and biodegradable skeletons. Furthermore, radioactive and drug eluting stent designs were identified as emerging novel treatments. In conclusion, the review offers an overview of remaining key challenges in oesophageal stent design and potential solutions. It is clear that further research is needed to improve the clinical outcome of stents and patient QOL.

Acute Stent-Induced Endothelial Denudation: Biomechanical Predictors of Vascular Injury

Recent concern for local drug delivery and withdrawal of the first Food and Drug Administration-approved bioresorbable scaffold emphasizes the need to optimize the relationships between stent design and drug release with imposed arterial injury and observed pharmacodynamics. In this study, we examine the hypothesis that vascular injury is predictable from stent design and that the expanding force of stent deployment results in increased circumferential stress in the arterial tissue, which may explain acute injury poststent deployment. Using both numerical simulations and ex vivo experiments on three different stent designs (slotted tube, corrugated ring, and delta wing), arterial injury due to device deployment was examined. Furthermore, using numerical simulations, the consequence of changing stent strut radial thickness on arterial wall shear stress and arterial circumferential stress distributions was examined. Regions with predicted arterial circumferential stress exceeding a threshold of 49.5 kPa compared favorably with observed ex vivo endothelial denudation for the three considered stent designs. In addition, increasing strut thickness was predicted to result in more areas of denudation and larger areas exposed to low wall shear stress. We conclude that the acute arterial injury, observed immediately following stent expansion, is caused by high circumferential hoop stresses in the interstrut region, and denuded area profiles are dependent on unit cell geometric features. Such findings when coupled with where drugs move might explain the drug–device interactions.

Numerical Study of Fully Coupled Fluid-Structure Interaction of Stented Ureter by Varying the Stent Side-Holes

Ureteral stents are a measure used for many medical issues involving urology, such as kidney stones or kidney transplants. The purpose of applying stents is to help relieve the urine flow while the ureter is either blocked or trying to close itself, which creates blockages. These ureteral stents, while necessary, cause pain and discomfort to patients due to them being a solid that moves around inside the patients’ body. The ureter normally moves urine to the bladder through peristaltic forces. Due to the ureter being a hyperelastic material, these peristaltic forces cause the ureter to deform easily, making it necessary for the stent to properly move the urine that flows through it for the patient not to face further medical complications. In this study, we seek to find a relation between the amount of stent side holes and the overall flow rate inside the stent with the ureter contracting due to peristalsis. A fully coupled fluid-structure interaction (FSI) model is developed to visualize how the ureter deforms due to peristalsis and the subsequent effect on the urine flow due to the ureter’s deformation. Numerical simulations using COMSOL Multiphysics, a commercial finite-element based solver, were used to study the fluid-structure interaction, and determine whether the stent performs more properly as the amount of stent side holes increases. The results showed that the stent model with a 10 mm distance between side hole pairs provided the highest outlet flow rate, which indicates a proper stent design that allows for maximized urine discharge. We hope this study can help improve the stent design in kidney transplant procedures to further ease the inconvenience on the patients.

Incorporation of Celiomesenteric Trunk With Double Kissing Directional Branches During Fenestrated-Branched Endovascular Aortic Repair

Purpose: Common celiomesenteric trunk (CMT) is a rare anatomical variation that occurs in 0.5% to 3.4% of the general population. Its presence may complicate planning and implantation of fenestrated and branched stent-grafts because the wide diameter and short length of the CMT to its bifurcation does not allow sufficient sealing for placement of bridging stents. Case Report: We report a patient with thoracoabdominal aortic aneurysm (TAAA) and CMT treated by fenestrated-branched endovascular aortic repair (FB-EVAR) using double kissing directional branches to incorporate the celiac axis and superior mesenteric artery. Pitfalls of stent design and implantation are outlined. Conclusion: Double kissing directional branches should be considered as an alternative to incorporate vessels with early bifurcation such as a CMT.

Critical evaluation of stents in coronary angioplasty: a systematic review

Background Coronary stents are routinely placed in the treatment and prophylaxis of coronary artery disease (CAD). Current coronary stent designs are prone to developing blockages: in-stent thrombosis (IST) and in-stent re-stenosis (ISR). This is a systematic review of the design of current coronary stent models, their structural properties and their modes of application, with a focus on their associated risks of IST and ISR. The primary aim of this review is to identify the best stent design features for reducing the risk of IST and ISR. To review the three major types of stents used in clinical settings today, determining best and relevant clinical practice by exploring which types and features of offer improved patient outcomes regarding coronary angioplasty. This information can potentially be used to increase the success rate of coronary angioplasty and stent technology in the future taking into account costs and benefits. Methods Scientific databases were searched to find studies concerning stents. After the exclusion criteria were applied, 19 of the 3192 searched literature were included in this review. Studies investigating three major types of stent design were found: bare-metal stents (BMS), drug-eluting stents (DES) and bioresorbable stents (BRS). The number of participants varied between 14 and 1264. On average 77.4% were male, with a mean age of 64 years. Results From the findings of these studies, it is clear that DES are superior in reducing the risk of ISR when compared to BMS. Conflicting results do not clarify whether BRS are superior to DES at reducing IST occurrence, although studies into newer BRS technologies show reducing events of IST to 0, creating a promising future for BRS showing them to be non-inferior. Thinner stents were shown to reduce IST rates, due to better re-endothelialisation. Scaffold material has also been shown to play a role with cobalt alloy stents reducing the risk of IST. This study found that thinner stents that release drugs were better at preventing re-blockages. Some dissolvable stents might be better at stopping blood clots blocking the arteries when compared to metal stents. The method and procedure of implanting the stent during coronary angioplasty influences success rate of these stents, meaning stent design is not the only significant factor to consider. Conclusions Positive developments in coronary angioplasty could be made by designing new stents that encompass all the most desirable properties of existing stent technology. Further work is needed to investigate the benefits of BRS in reducing the risk of IST compared to DES, as well as to investigate the effects of different scaffold materials on IST and ISR outcomes.