Assessment of radon concentration and heavy metal contamination in groundwater samples from some areas of Fazilka district, Punjab, India

2016 ◽  
Vol 26 (3) ◽  
pp. 368-374 ◽  
Author(s):  
Ajay Kumar ◽  
Saurabh Narang ◽  
Rohit Mehra ◽  
Surinder Singh
Keyword(s):  
Environmental Protection Agency ◽  
Radon Concentration ◽  
Inductively Coupled Plasma ◽  
Heavy Metal Contamination ◽  
Atomic Emission ◽  
Inductively Coupled ◽  
Groundwater Samples ◽  
Us Epa ◽  
Safe Limits ◽  
The Mean

Groundwater samples taken from 20 villages of Fazilka district, Punjab, India were analysed for radon concentration using RAD7, which is an electronic radon detector. Radon concentration varies from (1.4 ± 1.0) × 103 Bq/m3 to (4.9 ± 3.0) × 103 Bq/m3, which is much below the safe limits proposed by US Environmental Protection Agency (US EPA) and UN Scientific Committee on the Effects of Atomic Radiation. The mean annual effective dose calculated for these samples was also found to be within the limits provided by WHO and EU council. These samples were also analysed for concentration of certain heavy elements like As, Pb, Zn, Cu, Hg, Ni and Cd using inductively coupled plasma atomic emission spectrometer. Out of these, concentrations of As and Pb were found to exceed the permissible limits suggested by US EPA.

scholarly journals Evaluation of lead and cadmium concentrations in lipstick and eye pencil cosmetics

2019 ◽  
Vol 6 (4) ◽  
pp. 277-282 ◽  
Author(s):  
Rozhan Feizi ◽  
Nematollah Jaafarzadeh ◽  
Hamideh Akbari ◽  
Sahand Jorfi
Keyword(s):  
Inductively Coupled Plasma ◽  
Atomic Emission ◽  
Icp Oes ◽  
Plasma Atomic Emission ◽  
Inductively Coupled ◽  
Lead And Cadmium ◽  
Producer Country ◽  
Standard Values ◽  
The Mean ◽  
Harmful Effects

Background: The aim of this study was to determine the concentrations of lead (Pb) and cadmium (Cd) in lipstick and eye pencil cosmetics of different grades in the markets of Iran. Methods: This descriptive study was conducted in Ahvaz city in 2018. Sixty different samples of lipstick and eye pencil of three common brands were selected and analyzed using the Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-OES) and the results were compared with standard values recommended by the Food and Drug Administration (FDA). The analysis of lipsticks was based on producer country and colors and producer country only for eye pencil. Results: The mean concentrations of Pb and Cd were 41.86 and 53.42 µg/g, respectively. Concentrations of lead were higher than those of Cd in lipsticks, while for eye pencil, Cd showed higher concentrations. The overall results indicated that in all brands and colors of lipsticks, only 33% of the samples had Pb content less than the FDA limit, and among lipstick samples, 44% had Cd concentration less than the FDA limit of 3 μg/g, however, in 100% of the eye pencil samples, the concentration of Cd was higher than the recommended value of 3 μg/g. Conclusion: Given the health risks of exposure to heavy metals and in order to increase community awareness about the harmful effects of cosmetics, it is necessary to monitor the concentration of these toxic elements in these products and encourage the manufactures to meet the FDA standards.

Rapid Catalyst Capture Enables Metal-Free Parahydrogen-Based Hyperpolarized Contrast Agents

2018 ◽  
Author(s):  
Danila Barskiy ◽  
Lucia Ke ◽  
Xingyang Li ◽  
Vincent Stevenson ◽  
Nevin Widarman ◽  
...  
Keyword(s):  
Magnetic Resonance ◽  
Contrast Agents ◽  
Inductively Coupled Plasma ◽  
Organometallic Compounds ◽  
Atomic Emission ◽  
Platinum Group Metals ◽  
Resonance Spectroscopy ◽  
Plasma Atomic Emission ◽  
Inductively Coupled

<p>Hyperpolarization techniques based on the use of parahydrogen provide orders of magnitude signal enhancement for magnetic resonance spectroscopy and imaging. The main drawback limiting widespread applicability of parahydrogen-based techniques in biomedicine is the presence of organometallic compounds (the polarization transfer catalysts) in solution with hyperpolarized contrast agents. These catalysts are typically complexes of platinum-group metals and their administration in vivo should be avoided.</p> <p><br></p><p>Herein, we show how extraction of a hyperpolarized compound from an organic phase to an aqueous phase combined with a rapid (less than 10 seconds) Ir-based catalyst capture by metal scavenging agents can produce pure parahydrogen-based hyperpolarized contrast agents as demonstrated by high-resolution nuclear magnetic resonance (NMR) spectroscopy and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The presented methodology enables fast and efficient means of producing pure hyperpolarized aqueous solutions for biomedical and other uses.</p>

Rapid Catalyst Capture Enables Metal-Free Parahydrogen-Based Hyperpolarized Contrast Agents

2018 ◽  
Author(s):  
Danila Barskiy ◽  
Lucia Ke ◽  
Xingyang Li ◽  
Vincent Stevenson ◽  
Nevin Widarman ◽  
...  
Keyword(s):  
Magnetic Resonance ◽  
Contrast Agents ◽  
Inductively Coupled Plasma ◽  
Organometallic Compounds ◽  
Atomic Emission ◽  
Platinum Group Metals ◽  
Resonance Spectroscopy ◽  
Plasma Atomic Emission ◽  
Inductively Coupled

<p>Hyperpolarization techniques based on the use of parahydrogen provide orders of magnitude signal enhancement for magnetic resonance spectroscopy and imaging. The main drawback limiting widespread applicability of parahydrogen-based techniques in biomedicine is the presence of organometallic compounds (the polarization transfer catalysts) in solution with hyperpolarized contrast agents. These catalysts are typically complexes of platinum-group metals and their administration in vivo should be avoided.</p> <p><br></p><p>Herein, we show how extraction of a hyperpolarized compound from an organic phase to an aqueous phase combined with a rapid (less than 10 seconds) Ir-based catalyst capture by metal scavenging agents can produce pure parahydrogen-based hyperpolarized contrast agents as demonstrated by high-resolution nuclear magnetic resonance (NMR) spectroscopy and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The presented methodology enables fast and efficient means of producing pure hyperpolarized aqueous solutions for biomedical and other uses.</p>

Silicate analysis of carbonated rocks using ICP-AES with calibration by the concentration ratio

2020 ◽  
Vol 86 (5) ◽  
pp. 16-21
Author(s):  
T. A. Karimova ◽  
G. L. Buchbinder ◽  
S. V. Kachin
Keyword(s):  
Inductively Coupled Plasma ◽  
Concentration Ratio ◽  
Total Error ◽  
Atomic Emission ◽  
Emission Spectrometry ◽  
Calibration Error ◽  
Plasma Atomic Emission Spectrometry ◽  
Standard Samples ◽  
Inductively Coupled ◽  
Carbonate Materials

Calibration by the concentration ratio provides better metrological characteristics compared to other calibration modes when using the inductively coupled plasma atomic emission spectrometry (ICP-AES) for analysis of geological samples and technical materials on their base. The main reasons for the observed improvement are: i) elimination of the calibration error of measuring vessels and the error of weighing samples of the analyzed materials from the total error of the analysis; ii) high intensity of the lines of base element; and iii) higher accuracy of measuring the ratio of intensities compared to that of measuring the absolute intensities. Calcium oxide is better suited as a base when using calibration by the concentration ratio in analysis of carbonate rocks, technical materials, slags containing less than 20% SiO2 and more than 20% CaO. An equation is derived to calculate the content of components determined in carbonate materials when using calibration by the concentration ratio. A method of ICP-AES with calibration by the concentration ratio is developed for determination of CaO (in the range of contents 20 – 100%), SiO2 (2.0 – 35%), Al2O3 (0.1 – 30%), MgO (0.1 – 20%), Fe2O3 (0.5 – 40%), Na2O (0.1 – 15%), K2O (0.1 – 5%), P2O5 (0.001 – 2%), MnO (0.01 – 2%), TiO2 (0.01 – 2.0%) in various carbonate materials. Acid decomposition of the samples in closed vessels heated in a HotBlock 200 system is proposed. Correctness of the procedure is confirmed in analysis of standard samples of rocks. The developed procedure was used during the interlaboratory analysis of the standard sample of slag SH17 produced by ZAO ISO (Yekaterinburg, Russia).

Sign in / Sign up

Export Citation Format

Share Document