The importance of the calculation of angle factors to determine the mean radiant temperature in temperate climate zone: A university office building case

2021 ◽  
pp. 1420326X2110463
Author(s):  
Mehmet Furkan Özbey ◽  
Cihan Turhan
Keyword(s):  
Thermal Comfort ◽  
Measurement Methods ◽  
Office Building ◽  
Temperate Climate ◽  
Mean Radiant Temperature ◽  
Calculation Methods ◽  
Climate Zone ◽  
The Mean ◽  
Radiant Temperature ◽  
Temperate Climate Zone

Thermal comfort depends on four environmental (air velocity, relative humidity, air temperature, mean radiant temperature) and two personal (clothing insulation and metabolic rate) parameters. Among all parameters, the mean radiant temperature (tr) is the most problematic variable in thermal comfort studies due to its complexity. Measurement methods, calculation methods and assumptions are mostly used to obtain the tr. Researchers mainly prefer to obtain the tr via measurement methods or assumptions due to their easiness compared to the calculation methods. Besides, some researchers use constant values of angle factors in calculation methods. However, using constant values is not proper for every indoor environment, and it causes wrong estimations in the tr and thus the thermal comfort. This paper gives the importance of calculation of angle factors, with an example of a university office building in temperate climate zone, according to the ISO 7726. The angle factors of the room were calculated for a seated occupant from the centre of gravity in three different locations and compared with the constant angle factors. The results indicate that a significant difference (MAPE of 1.02) was found in the tr values, which were obtained by calculation of constant values of angle factors.

scholarly journals The most problematic variable in the course of human-biometeorological comfort assessment — the mean radiant temperature

2011 ◽  
Vol 3 (1) ◽  
Author(s):  
Noémi Kántor ◽  
János Unger
Keyword(s):  
Thermal Comfort ◽  
Short Wave ◽  
Urban Environments ◽  
Outdoor Thermal Comfort ◽  
Radiation Environment ◽  
Wave Radiation ◽  
Mean Radiant Temperature ◽  
Radiation Fluxes ◽  
The Mean ◽  
Radiant Temperature

AbstractThis paper gives a review on the topic of the mean radiant temperature Tmrt, the most important parameter influencing outdoor thermal comfort during sunny conditions. Tmrt summarizes all short wave and long wave radiation fluxes reaching the human body, which can be very complex (variable in spatial and also in temporal manner) in urban settings. Thermal comfort researchers and urban planners need easy and sound methodological approaches to assess Tmrt. After the basics of the Tmrt calculation some of the methods suitable for obtaining Tmrt also in urban environments will be presented.. Two of the discussed methods are based on instruments which measure the radiation fluxes integral (globe thermometer, pyranometer-pyrgeometer combination), and three of the methods are based on modelling the radiation environment with PC software (RayMan, ENVI-met and SOLWEIG).

scholarly journals Thermal comfort of patients in hospital ward areas

1977 ◽  
Vol 78 (1) ◽  
pp. 17-26 ◽  
Author(s):  
R. M. Smith ◽  
A. Rae
Keyword(s):  
Steady State ◽  
Thermal Comfort ◽  
Air Temperature ◽  
Hospital Ward ◽  
Patient Comfort ◽  
Mean Radiant Temperature ◽  
Air Velocity ◽  
Assessment Techniques ◽  
The Mean ◽  
Radiant Temperature

SUMMARYThe patient is identified as being of prime importance for comfort standards in hospital ward areas, other ward users being expected to adjust their dress to suit the conditions necessary for patient comfort. A study to identify the optimum steady state conditions for patient comfort is then described.Although this study raises some doubts as to the applicability of the standard thermal comfort assessment techniques to ward areas, it is felt that its results give a good indication of the steady-state conditions preferred by the patients. These were an air temperature of between 21.5° and 22° C and a relative humidity of between 30% and 70%, where the air velocity was less than 0.1 m/s and the mean radiant temperature was close to air temperature.

scholarly journals Analysis of Thermal Comfort in an Intelligent Building

2017 ◽  
Vol 13 (1) ◽  
pp. 72-76 ◽  
Author(s):  
Grzegorz Majewski ◽  
Marek Telejko ◽  
Łukasz J. Orman
Keyword(s):  
Thermal Comfort ◽  
Carbon Dioxide Concentration ◽  
Mean Radiant Temperature ◽  
Air Flow Rate ◽  
Point Scale ◽  
Intelligent Building ◽  
University Of Technology ◽  
Measurement Results ◽  
The Mean ◽  
Radiant Temperature

AbstractAnalysis of thermal comfort in the ENERGIS Building, an intelligent building in the campus of the Kielce University of Technology, Poland is the focus of this paper. For this purpose, air temperature, air relative humidity, air flow rate and carbon dioxide concentration were measured and the mean radiant temperature was determined. Thermal sensations of the students occupying the rooms of the building were evaluated with the use of a questionnaire. The students used a seven-point scale of thermal comfort. The microclimate measurement results were used to determine the Predicted Mean Vote and the Predicted Percentage Dissatisfied indices.

scholarly journals Evaluating Thermal Comfort in a Naturally Conditioned Office in a Temperate Climate Zone

Buildings ◽  
2016 ◽  
Vol 6 (3) ◽  
pp. 27 ◽  
Author(s):  
Andrés Gallardo ◽  
Massimo Palme ◽  
Andrea Lobato-Cordero ◽  
R. Beltrán ◽  
Gabriel Gaona
Keyword(s):  
Thermal Comfort ◽  
Temperate Climate ◽  
Climate Zone ◽  
Temperate Climate Zone

Thermomodernization of the school and change of the level of thermal comfort

2021 ◽  
pp. 62-74
Author(s):  
V. Deshko ◽  
◽  
N. Buyak ◽  
I. Bilous ◽  
◽  
...  
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Comfort Level ◽  
Mean Radiant Temperature ◽  
Before And After ◽  
Change In The Mean ◽  
The Mean ◽  
Energy Audits ◽  
Radiant Temperature ◽  
The Impact

The paper highlights the topical issue of ensuring the appropriate thermal comfort level and reducing energy consumption by public buildings. Thermal modernization, in turn, allows increasing the level of thermal comfort, which is not taken into account and evaluated in practice, although the relevant standards for comfort conditions and categories of buildings to ensure comfort have been introduced in Ukraine. The aim of the study is to analyze the impact of thermal modernization on the level of energy consumption and thermal comfort. The paper analyzes the change in the level of comfort before and after thermal modernization, defines the comfortable conditions category of the building, presents the change in the mean radiant temperature, as one of the main factors of PMV change in these conditions. PMV has been found to vary from -0.7 in the cold months to 0.2 in the off-season. Changing the thermal resistance can increase the PMV. The wall of the S orientation is characterized by larger fluctuations of PMV, which is due to the inflow of solar radiation and as a consequence of increasing the mean room radiant temperature. The change in the value of energy consumption is analyzed, the class of energy efficiency and the category for providing comfortable conditions are determined. Such an approach on the example of a real building is an example for conducting energy audits and certification taking into account comfort indicators.

scholarly journals SIMULATION OF THE INFLUENCE OF VEGETATION ON MICROCLIMATE AND THERMAL COMFORT IN THE CITY OF SÃO PAULO

2019 ◽  
Vol 3 (2) ◽  
pp. 1 ◽  
Author(s):  
Jörg Spangenberg ◽  
Paula Shinzato ◽  
Erik Johansson ◽  
Denise Duarte
Keyword(s):  
Thermal Comfort ◽  
Street Canyon ◽  
Sao Paulo ◽  
City Centre ◽  
São Paulo ◽  
Mean Radiant Temperature ◽  
Speed Up ◽  
The Mean ◽  
Radiant Temperature ◽  
The City

The microclimates of a park, a square and a street canyon were measured on a summer day in the city centre of São Paulo, Brazil. The field monitoring showed that the park was up to 2°C cooler than the square and the canyon. The effect of adding shading trees to the street canyon was simulated for the same day using the numerical model ENVI-met. The simulations showed that incorporating street trees in the urban canyon had a limited cooling effect on the air temperature (up to 1.1°C), but led to a significant cooling of the street surface (up to 12°C) as well as a great reduction of the mean radiant temperature at pedestrian height (up to 24°C). Although the trees lowered the wind speed up to 45% of the maximum values, the thermal comfort was improved considerably as the physiologically equivalent temperature (PET) was reduced by up to 12°C.

scholarly journals Roof-Integrated Green Technologies, Energy Saving and Outdoor Thermal Comfort: Insights from a Case Study in Urban Environment

2021 ◽  
Vol 16 (1) ◽  
pp. 13-23
Author(s):  
Guglielmina Mutani ◽  
Valeria Todeschi
Keyword(s):  
Thermal Comfort ◽  
Energy Saving ◽  
Green Roofs ◽  
Outdoor Thermal Comfort ◽  
Mean Radiant Temperature ◽  
Green Technologies ◽  
Heating And Cooling ◽  
Before And After ◽  
The Mean ◽  
Radiant Temperature

Green urban infrastructures have a significant impact on urban climate mitigation, on indoor and outdoor thermal comfort and on energy performance of buildings. In this paper, outdoor thermal comfort conditions and energy saving for space heating and cooling were investigated before and after the use of roof-integrated green technologies. Existing urban energy and climate models and tools were applied to an urban area located in a Turin (Italy). CitySim, ENVI-met and SOLWEIG tools and a GIS-based model were used to evaluate the mean radiant temperature and the thermal comfort of outdoor spaces before and after the use of vegetated roofs and green surfaces such as the predicted mean vote (PMV), the physiological equivalent temperature (PET) and the universal thermal climate index (UTCI). A GIS-based engineering model and CitySim tool were used to evaluate the energy saving and energy independence index for space heating and cooling after the use of green roofs and solar technologies. According to the shape and the suitability of rooftop elaborated with GIS tools, some roofs were identified as potential green roofs other as potential solar roofs for installing solar thermal collectors and photovoltaic panels. According to the results it is possible to confirm that the use of green roofs and urban greenery can decrease the mean radiant temperature until about 10℃ during summer season, improving outdoor thermal comfort conditions and energy savings with a reduction of 12% for space cooling energy consumption.

Sign in / Sign up

Export Citation Format

Share Document