Can palatal depth influence the buccolingual inclination of molars? A cone beam computed tomography-based retrospective evaluation

2020 ◽  
Vol 47 (4) ◽  
pp. 303-310
Author(s):  
Prasanna Arvind TR ◽  
SP Saravana Dinesh
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Tamil Nadu ◽  
Cone Beam ◽  
Skeletal Class ◽  
The Mean ◽  
Student’S T ◽  
Suitable Reference ◽  
The Right ◽  
Vertical Growth Pattern

Objective: To interpret a correlation between buccolingual inclination of molars and palatal depth in hyperdivergent patients and to identify importance of determining inclination of molars in assessing transverse discrepancies (as skeletal or dental) Design: This was a retrospective cone beam computed tomography (CBCT) study. Setting: The study was conducted in the Department of Orthodontics, Saveetha Dental College and Hospital, Tamil Nadu, India. Methods: This was a retrospective CBCT study of 79 patients who underwent diagnostic CBCT for treatment purposes. The CBCT scans were evaluated systematically and the required parameters were accessed with suitable reference planes. Student’s t-test (95% confidence interval) was performed to determine buccolingual inclination of first molars between the right and left sides. Only patients with a vertical growth pattern and skeletal class I relation were included and they were classified into three groups based on their palate depth. Results: In patients with palatal depth > 22 mm, the mean inclination of molars was 7.4°; with palatal depth in the range of 19–22 mm, the mean inclination of molars was 5.23°; and with palatal depth < 19 mm, the mean inclination of molars was 2.9°. Results showed that there was a significant correlation between the buccolingual inclination of molars and the palate depth in vertical growers ( P < 0.05). Conclusion: The buccolingual inclination of first molars is increased in patients with greater palatal depth. This parameter is helpful in classifying crossbites as skeletal or dental. The amount of compensation required to correct the cross bite can be adjusted using Korkhaus Index.

scholarly journals Determining the Size of the Mental Foramen: A Cone-Beam Computed Tomography Study

2017 ◽  
Vol 7 (2) ◽  
pp. 20
Author(s):  
Seda Falakaloglu ◽  
Artemisa Veis
Keyword(s):  
Computed Tomography ◽  
Retrospective Study ◽  
Cone Beam Computed Tomography ◽  
Mental Foramen ◽  
Axial Plane ◽  
Cone Beam ◽  
Coronal Image ◽  
Significant Difference ◽  
Student’S T ◽  
The Right

Aim: Knowledge of the position of the mental foramen is important to prepare strategy when administering regional anesthesia, performing dental surgical procedures, endodontic treatments. Also, it is critical to analyze diameter of mental foramen in sagittal, coronal, and axial images.  The aim of this retrospective study was to determine the diameter of the MF in different planes from CBCT images. Methodology: This study was designed at Department of Endodontics, Dicle University, Diyarbakır, Turkey. One hundred twenty three (67 female, 56 male) CBCT scans that met the study criteria were obtained. All images were obtained from i-CAT (Imaging Sciences International, Hatfield, PA). Data were analyzed using Student’s t-tests and Tukey HSD tests. Results: For the analysis of age, data were divided into four groups: 12–17, 18–29, 30–49, and ≥50 years. The data were also divided into two groups by gender. Axial and coronal image measurements were also divided into right and left. There was a statistical difference compared with females and males (p<0.05). In the coronal plane, the right region showed significant differences in measurements between the groups (p<0.05). In the axial plane, there was no statistically significant difference between them (p>0.05). The differences between the groups in the left region in the axial plane measurements were significant (p<0.05). Conclusions: Using CBCT imaging superimposition of anatomical structures can be eliminated. It is important that determine that the size of the mental foramen. This study is a retrospective study using CBCT from patient and find that the size of the mental foramen. How to cite this article: Falakaloglu S, Veis A. Determining the size of the mental foramen: A cone-beam computed tomography study. Int Dent Res 2017;7:20-25. 

scholarly journals A volumetric study of mandibular condyles in orthognathic patients by semiautomatic segmentation

2021 ◽  
Author(s):  
Max-Philipp Lentzen ◽  
Maximilian Riekert ◽  
Johannes Buller ◽  
Andrea Grandoch ◽  
Matthias Zirk ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Volumetric Analysis ◽  
Cone Beam ◽  
Bivariate Analysis ◽  
Semiautomatic Segmentation ◽  
Computed Tomography Images ◽  
Precise Knowledge ◽  
The Mean ◽  
The Right

Abstract Purpose This study was conducted to elucidate volumetric data of mandibular condyles of orthognathic patients by analyzing cone beam computed tomography images based upon semiautomatic segmentation. Methods Cone beam computed tomography images of 87 patients with malocclusions were analyzed in this retrospective study. Patients were between 17 and 53 years old and diagnosed with Angle class I, II, or III malocclusion. By using the validated open-source software “ITK-SNAP,” the volumetric measurements of 174 mandibular condyles were performed. Volumetric analysis was performed according to intra-subject side differences by paired Student t test. In accordance to inter-subject side, gender, age and type of malocclusion differences bivariate analysis and ANOVA were applied. Results The mean volume for the right condyle was 1.378 ± 0.447 cm3, with a maximum of 2.379 cm3 and a minimum of 0.121 cm3. The mean volume for the left side was 1.435 ± 0.474 cm3, with a maximum of 3.264 cm3 and a minimum of 0.109 cm3. Bivariate analysis indicated a highly significant inter-subject difference between the volume of the left and right mandibular condyles (p < 0.01). Females had a significantly smaller condyle volume than males (p < 0.05 left condyle; p < 0.01 right condyle). Conclusion The fact that shape and volume of mandibular condyles show a high susceptibility to pathological alterations and particularly malocclusions makes a precise knowledge about volumetric changes indispensable. Our results show that significant inter-subject differences in condyle volume could be found with respect to the side and gender. Larger volumes could be assessed for the left condyle and for male patients.

scholarly journals Cone-Beam Computed Tomography Evaluation of Mental Foramen Variations: A Preliminary Study

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Mahnaz Sheikhi ◽  
Mitra Karbasi Kheir ◽  
Ehsan Hekmatian
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Mental Foramen ◽  
Cone Beam ◽  
Vertical Position ◽  
3 Dimensional ◽  
The Mean ◽  
The Right ◽  
Common Shape ◽  
Surgical Operations

Background. Mental foramen is important in surgical operations of premolars because it transfers the mental nerves and vessels. This study evaluated the variations of mental foramen by cone-beam computed tomography among a selected Iranian population.Materials and Methods. A total number of 180 cone-beam computed tomography projections were analyzed in terms of shape, size, direction, and horizontal and vertical positions of mental foramen in the right and left sides.Results. The most common shape was oval, opening direction was posterior-superior, horizontal position was in line with second premolar, and vertical position was apical to the adjacent dental root. The mean of foremen diameter was 3.59 mm.Conclusion. In addition to the most common types of mental foramen, other variations exist, too. Hence, it reflects the significance of preoperative radiographic examinations, especially 3-dimensional images to prevent nerve damage.

scholarly journals Intraoperative cone beam computed tomography for detecting residual stones in percutaneous nephrolithotomy: a feasibility study

Urolithiasis ◽  
2021 ◽  
Author(s):  
R. A. Kingma ◽  
M. J. H. Voskamp ◽  
B. H. J. Doornweerd ◽  
I. J. de Jong ◽  
S. Roemeling
Keyword(s):  
Computed Tomography ◽  
Percutaneous Nephrolithotomy ◽  
Cone Beam Computed Tomography ◽  
University Hospital ◽  
Cone Beam ◽  
Cross Sectional ◽  
The Mean ◽  
Residual Stones ◽  
Residual Fragments

AbstractCone beam computed tomography (CBCT) provides multiplanar cross-sectional imaging and three-dimensional reconstructions and can be used intraoperatively in a hybrid operating room. In this study, we investigated the feasibility of using a CBCT-scanner for detecting residual stones during percutaneous nephrolithotomy (PCNL). Intraoperative CBCT-scans were made during PCNL procedures from November 2018 until March 2019 in a university hospital. At the point where the urologist would have otherwise ended the procedure, a CBCT-scan was made to image any residual fragments that could not be detected by either nephroscopy or conventional C-arm fluoroscopy. Residual fragments that were visualized on the CBCT-scan were attempted to be extracted additionally. To evaluate the effect of this additional extraction, each CBCT-scan was compared with a regular follow-up CT-scan that was made 4 weeks postoperatively. A total of 19 procedures were analyzed in this study. The mean duration of performing the CBCT-scan, including preparation and interpretation, was 8 min. Additional stone extraction, if applicable, had a mean duration of 11 min. The mean effective dose per CBCT-scan was 7.25 mSv. Additional extraction of residual fragments as imaged on the CBCT-scan occurred in nine procedures (47%). Of the follow-up CT-scans, 63% showed a stone-free status as compared to 47% of the intraoperative CBCT-scans. We conclude that the use of CBCT for the detection of residual stones in PCNL is meaningful, safe, and feasible.

scholarly journals Intrusion of maxillary molar roots into the maxillary sinus in a sample of the Egyptian population using cone beam computed tomography

2021 ◽  
Vol 52 (1) ◽  
Author(s):  
Esraa Ahmed Eid ◽  
Fatma Mostafa El-Badawy ◽  
Walaa Mohamed Hamed
Keyword(s):  
Computed Tomography ◽  
Maxillary Sinus ◽  
Cone Beam Computed Tomography ◽  
Third Molar ◽  
Cone Beam ◽  
Egyptian Population ◽  
Maxillary Molar ◽  
Maxillary Sinus Floor ◽  
Sinus Floor ◽  
The Right

Abstract Background The proximity of the maxillary sinus floor to the maxillary molar roots increases the probability of oroantral communication on conducting any surgical or endodontic procedure in the involved area. The aim of this study is to evaluate the relationship between each maxillary molar root and maxillary sinus floor using cone beam computed tomography. Predicting the probability of protrusion of each root into the sinus will consequently predict the probability of occurrence of the oroantral fistula in a sample of the Egyptian population. Results The total number of roots located outside the sinus was 121 (35.3%), while those contacting the sinus floor were 80 (23.3%) and those intruded the sinus were 141 (41.2%). The percentage of root intrusion into the sinus in males (56.9%) was significantly (p = 0.01) higher than females (42.9%). The probability of root intrusion in the left molars (54.2%) was non-significantly (p = 0.067) higher than that of the right side (44.3%). As for the type of tooth, the second molar showed the highest probability of root intrusion into the sinus (55.3%) followed by the third molars (52.6%) then the first molars (40.9). According to the type of root, the mesiobuccal root showed the highest probability of intrusion into the sinus (50.9%) followed by the palatal root (49.1%) then the distobuccal root (47.4%). However, the difference in both type of tooth and type of root was statistically non-significant (p = 0.051 and 0.869 respectively). As for the individual root with the highest probability of intrusion, the mesio-buccal root of the right third molar is the most frequent root to intrude the sinus (71.4%) and the mesio-buccal root of the right first molar is the least frequent (22.7%). Conclusions In a sample of the Egyptian population, males exhibit higher probability of root protrusion into the sinus than females. The side and type of tooth are of higher impact on the probability of its intrusion into the sinus compared to the type of root. Left second molars are at a higher risk of oroantral communications on surgical or endodontic procedures compared to other molars due to its highest probability of intrusion into the sinus.

scholarly journals Height difference between the vestibular and palatal walls and palatal width: a cone beam computed tomography approach

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
P. López-Jarana ◽  
C. M. Díaz-Castro ◽  
A. Falcão ◽  
C. Falcão ◽  
J. V. Ríos-Santos ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Bone Thickness ◽  
Height Difference ◽  
Mean Values ◽  
The Mean ◽  
Maxilla And Mandible ◽  
Palatal Bone ◽  
Two Parameters

Abstract Background The objective of this study was to measure two parameters involved in tri-dimensional implant planning: the position of the buccal and palatal bone wall and the palatal thickness. Methods Cone beam computed tomography (CBCT) images (Planmeca ProMax 3D) of 403 teeth (208 upper teeth and 195 lower teeth) were obtained from 49 patients referred to the Dental School of Seville from January to December 2014. The height difference between the palatal and buccal walls was measured on the most coronal point of both walls. The thickness of the palatal wall was measured 2 mm from the most coronal point of the palatal wall. Results The mean values in the maxilla were 1.7 ± 0.9 mm for central and lateral incisors, 2.2 ± 1.7 mm for canines, 1.6 ± 0.9 mm for premolars and 1.9 ± 1.5 mm for molars. In the lower jaw, the mean values were 1.3 ± 0.8 mm for incisors, 1.7 ± 1.2 mm for canines, 2.3 ± 1.3 mm for premolars, and 2.6 ± 1.7 mm for molars. In the upper jaw, more than 55% of maxillary teeth (excluding second premolars and molars) presented mean height differences greater than 1 mm. In the mandible, more than 60% of incisors showed a buccal bone thickness of 1 mm from the apical to lingual aspect. All teeth except the second premolar presented a buccal wall located more than 1 mm more apically than the lingual bone wall. Conclusions The buccal bone wall is located more apically (greater than 1 mm) than the palatal or lingual table in most of the cases assessed. The thickness of the palatal or lingual table is also less than 2 mm in the maxilla and mandible, except in the upper canines and premolars and the lower molars.

Ionizing radiation and its considerations in imaging diagnosis: comparison of absorbed dose between cone beam computed tomography and multi-detector computed tomography in the head and neck

2021 ◽  
Author(s):  
P.L.E. Oliveira ◽  
C.R. Starling ◽  
C.L.P. Maurício ◽  
F.R. Guedes ◽  
M.A. Visconti ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Head And Neck ◽  
Cone Beam Computed Tomography ◽  
Absorbed Dose ◽  
Cone Beam ◽  
Thermoluminescent Dosimeters ◽  
Organ Tissue ◽  
The Mean ◽  
Average Adult ◽  
Multi Detector Computed Tomography

Introduction: The objective of this study was to compare the mean absorbed dose in patients undergoing head and neck examinations using two cone beam computed tomography (CBCT, Kodak and i-CAT) and one multi-detector computed tomography (MDCT). Methods: Three thermoluminescent dosimeters (TLDs), calibrated in air kerma, were positioned in 24 regions of the head and neck of a phantom simulating an average adult. The mean absorbed dose (mGy) values in these positions, for different organs and tissues, were obtained using correction factors, considering the ratio between the mass energy absorption coefficients of organ/tissue and air. Comparison between radiation doses in the most radiosensitive regions was done by calculating the ratio of these dose values, with propagated uncertainty. Results: The dose in all regions was significantly higher for MDCT when compared to CBCT. Concerning CBCT equipment, the Kodak device had a higher absorbed dose than the i-CAT for most of the regions tested. The uncertainty of the i-CAT was greater than that of the Kodak. Conclusion: Due to the considerable difference between absorbed doses, emphasizing the higher dose values obtained in MDCT, the dissemination of CBCT application in medicine is recommended, as well as further studies to broaden the criteria for use.

scholarly journals Analisis gambaran histogramdan densitas kamar pulpa pada gigi suspek pulpitis reversibel dan ireversibel dengan menggunakan radiografi cone beam computed tomography (Histogram and density analysis of irreversible and reversible pulpitissuspected tooth using cone beam computed tomography radiography)

2014 ◽  
Vol 13 (2) ◽  
pp. 122
Author(s):  
Lusi Epsilawati ◽  
Suhardjo Sitam ◽  
Sam Belly ◽  
Fahmi Oscandar
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Secondary Data ◽  
Cone Beam ◽  
Pulp Chamber ◽  
Control Data ◽  
Density Analysis ◽  
The Right ◽  
Irreversible Pulpitis ◽  
Peak Value

Inflammation of the pulp is most common and difficult to diagnose. For it radiographs is necessary. One attempt to do is to assess its histogram and density. Radiography equipment that has the ability to analyze is cone beam computedtomography (CBCT). The purpose of this study is to analyze radiograph of the pulp chamber histogram: peak value,grayscale and trends, as well as the density on the condition reversible and irreversible pulpitis condition. The populationof this descriptive study is secondary data of CBCT-3D radiographs during 2012-2013. Selected sample of 75 data isreversible pulpitis, irreversible pulpitis 80 data, as well as 20 normal condition data as control. Data were analyzed byone way ANOVAand are presented in tables and graphs. The results showed that the value of the histogram under normalconditions showeda different significance for both the peak value of the reversible or irreversible pulpitis (p= 0.01). It isdifferent with a grayscale value, showed no significant different between normal with reversible pulpitis (p =0.997) and significantly different between normal and pulpitis reversible against pulpitis irrebversible (p= 0.03-0.01). There is a growing trend change is on the right direction of reversible and irreversible pulpitis. It was concluded that the irreversiblepulpitis, density and histogram shows the direction of more luscent compared with normal and reversible pulpitisconditions.

Sign in / Sign up

Export Citation Format

Share Document